Microwave-assisted cleavage of Weinreb amide for carboxylate protection in the synthesis of a (R)-3-hydroxyalkanoic acid

A versatile route for the modular synthesis of (R)-3-hydroxyalkanoic acids, constituents of the naturally biodegradable poly(3-hydroxyalkanoate) polymers, and its application to the synthesis of (R)-3-hydroxydecanoic acid is described. Key steps include a microwave-assisted catalytic transfer hydrogenation and a facile microwave-assisted hydrolysis of an N-methoxy-N-methyl (Weinreb) amide, which enhances the practicality of this protecting group for carboxylic acids.     

Modification of carbon ceramic electrode prepared with sol-gel technique by a thin film of chlorogenic acid: application to amperometric detection of NADH

The carbon ceramic electrode prepared with sol-gel technique is modified by a thin film of chlorogenic acid (CGA). By immersing the carbon ceramic electrode in aqueous solution of chlorogenic acid at less than 2 s a thin film of chlorogenic acid adsorbed strongly and irreversibly on the surface of electrode. The cyclic voltammetry of the resulting modified CCE prepared at optimum conditions shows a well-defined stable reversible redox couple due to hydroquinone/quinone system in both acidic and basic solutions. The modified electrode showed excellent electrocatalytic activity toward NADH oxidation and it also showed a high analytical performance for amperometric detection of NADH. The catalytic rate constant of the modified carbon ceramic electrode for the oxidation of NADH is determined by cyclic voltammetry measurement. Under the optimised conditions the calibration curve is linear in the concentration range 1-120 μm. The detection limit (S/N = 3) and sensitivity are 0.2 μM and 25 nA μM⁻¹.The results of six successive measurement-regeneration cycles show relative standard deviations of 2.5% for electrolyte solution containing 1 mM NADH, indicating that the electrode renewal gives a good reproducible and antifouling surface. The advantages of this amperometric detector are: high sensitivity, excellent catalytic activity, short response time t < 2 s, remarkable long-term stability, simplicity of preparation at short time and good reproducibility.     

A preliminary 3D model for cytochrome P450 2D6 constructed by homology model building

Summary A homology model building study of cytochrome P450 2D6 has been carried out based on the crystal structure of cytochrome P450 101. The primary sequences of P450 101 and P450 2D6 were aligned by making use of an automated alignment procedure. This alignment was adjusted manually by matching -helices (C, D, G, I, J, K and L) and -sheets (3/4) of P450 101 that are proposed to be conserved in membrane-bound P450s (Ouzounis and Melvin [Eur. J. Biochem., 198 (1991) 307]) to the corresponding regions in the primary amino acid sequence of P450 2D6. Furthermore, -helices B, B and F were found to be conserved in P450 2D6. No significant homology between the remaining regions of P450 101 and P450 2D6 could be found and these regions were therefore deleted. A 3D model of P450 2D6 was constructed by copying the coordinates of the residues from the crystal structure of P450 101 to the corresponding residues in P450 2D6. The regions without a significant homology with P450 101 were not incorporated into the model. After energy-minimization of the resulting 3D model of P450 2D6, possible active site residues were identified by fitting the substrates debrisoquine and dextrometorphan into the proposed active site. Both substrates could be positioned into a planar pocket near the heme region formed by residues Val³⁷⁰, Pro³⁷¹, Leu³⁷², Trp³¹⁶, and part of the oxygen binding site of P450 2D6. Furthermore, the carboxylate group of either Asp¹⁰⁰ or Asp³⁰¹ was identified as a possible candidate for the proposed interaction with basic nitrogen atom(s) of the substrates. These findings are in accordance with a recently published predictive model for substrates of P450 2D6 [Koymans et al., Chem. Res. Toxicol., 5 (1992) 211].     

Electroanalytical Study of the Composition of the Raw Pigment Mixtures that Yield the Metallic Lustre on Ceramics. A Link Between Composition and Final Result

Voltammetry of immobilized microparticles was used to study the electrochemistry of the raw pigments that produce the metallic lustre on ceramics after a successful firing. To study this influence of the mixture components on the reduction properties to achieve the metallic lustre, 14 mixtures of illitic clay, Fe₂O₃, HgS, CuO and AgNO₃ were prepared and studied in different media. Iron oxide improves the yield of the reduction of the metals and cinnabar helps a closer reduction of silver to copper reduction and prevents the Ag? Cu alloying because of the formation of silver–mercury adducts. The presence of one of the metals influences the peak position of the other metal. The use of vinegar as diluting agent is not casual, because in this media the reduction of silver takes place at a potential closer to the copper. This electroanalytical technique allowed to distinguish between powders of different composition and offered some information about the role of the components in the reduction of copper and silver and the selection of vinegar to prepare the raw pigment suspensions.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Oxidation at a sol-gel composite electrode doped with a dirhodium-substituted polyoxometalate for amperometric detection of peptides separated by HPLC

Oxidation of a variety of compounds, including methionine (Met), using a complex formed between dirhodium(II) acetate and the lacunary form of phosphotungstic acid as the catalyst is effective over a wide range of conditions, including pH 2–10. Thus, amperometric detection at a composite in which this complex is immobilized in a sol–gel material does not place restrictions on selection of conditions for separations by reverse-phase HPLC. A demonstration of this point is shown by a study of Met, Met–Phe, Phe–Met, Met–Met, and Gly–Met–Gly (Phe, phenylalanine; Gly, glycine). Using a 0.05 M phosphate buffer at pH 6.7, a C18 column, and a flow rate of 1 ml min⁻¹, capacity factors for Met, Gly–Met–Gly, Met–Met, and Phe–Met were 1.4, 2.1, 5.6, and 34, respectively. Phe–Met and Met–Phe co-eluted.     

Sol-Gel Preparation of Ceramic Coatings for Electrical, Laser, Space Engineering and Power

The brief review, based on long-term experience of authors on preparation of temperature-resistant electric insulating and optical light-reflecting ceramic coatings on metal surface is offered. The main components of TEOS-, H₃PO₄- and alkali silicates-derived sols and suspensions for deposition of ceramic coatings are listed. Some features of preparation of the coatings from the sols containing fillers are analysed. Two approaches to improve bending and electrical strength of flexible insulation are developed. The techniques of synthesis of modified fillers for preparing gas-proof and anticorrosive coatings are offered. The wide functional possibility and extensive list of application areas of the coatings and some materials prepared from sols with fillers, including on far prospect are given.     

Sol-Gel Synthesis of Humidity-Sensitive P2O5-SiO2 Amorphous Films

The sol-gel synthesis of silicophosphate gels using phosphoryl chloride and tetraethoxysilane as molecular precursors is reported and discussed. Gel-derived glasses and films having the molar compositions 10P₂O₅ · 90SiO₂ and 30P₂O₅ · 70SiO₂ have been obtained. The structure of the dried gels as well as the structural modifications that occurs during the transformations in gel-derived glasses are analyzed by Fourier transform infrared spectroscopy (FTIR). It has been found that the evidence of the P—O—Si linkages begins to appear only on the FTIR spectra of the bulk gels heat treated up to 400°C while they are well resolved on the FTIR spectra of the bulk gel samples heated up to 1000°C indicating that at this temperature the transformation in the corresponding gel-derived glasses occurs. The humidity sensitive properties of the gel-films have been evaluated by electrochemical impedance spectroscopy (EIS). The phosphorous content as well as the temperature of the heat treatments strongly affect the sensitivity to RH of the gel-derived films.     

用环加成反应合成含氟杂环化合物的研究

综述了近年来利用一些新型的含氟砌块，通过它们的环加成反应来高效地合成 含氟杂环化合物的研究，其中包括以下两个部分：(1)用1，3—偶极环加成反应合 成五元含氟杂环化合物；(2)用杂原于Diels-Alder反应合成六元含氟杂环化合物．     

纳米-微米复合孔泡沫陶瓷固定化脂肪酶

考察了泡沫陶瓷的孔径分布和表面性质对脂肪酶固定化的影响.研究表明,泡沫陶瓷的纳米孔孔径分布非常适合脂肪酶的固定化,对固定化酶的催化效率有决定性的影响.经1h的定化,泡沫陶瓷固定化酶的活性达商业化硅藻土固定化酶的1.33倍,体积活力为其2.63倍,蛋白载量为45.36mg/g陶瓷,比活为1215.39U/g,活力回收为41.2%.泡沫陶瓷固定化脂肪酶在有机相乙酸乙酯合成中表现优良,连续使用5次,每次反应3h,乙酸转化率均在93%左右.