Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Novel Hydrogen‐bond Three Dimensional Networks Generated from the Reaction of Metal Nitrate Hydrate (M = Co,Ni) with Ammonium Thiocynate and Bidentate Ligand Piperazine

The reaction of Co(NO₃)₂·6H₂O with two equivalents of PPz (PPz = piperazine hexahydrate) and two equivalents of NH₄SCN in CH₃OH afforded the complex [Co(NCS)₂(PPz)₂(CH₃OH)₂]. The reaction of Ni(NO₃)₂·6H₂O with two equivalents of PPz and four equivalents of NH₄SCN in CH₃OH afforded the complex [Ni(NCS)₄(PPz)₂]. Their IR spectra have been recorded and the structures have been determined. Crystal data for 1 : space group P&1bar;, a = 6.7208(6) Å, b = 8.4310(8) Å, c = 8.5923(8) Å, a = 77.881(2)°, β = 76.342(2)°, γ = 83.936(2)°, V = 461.75(1) ų, Z = 1 with final residuals R1 = 0.0650 and wR2 = 0.1725. Crystal data for 2 : space group P2(1)/n, a = 7.4209(6) Å, b = 11.0231(9) Å, c = 12.317(1) Å, β = 96.642(9)°, V = 1000.9(2) ų, Z = 2 with final residuals R1 = 0.0378 and wR2 = 0.0809. Important NCS—H‐N and O‐H—N(PPz) hydrogen‐bonding interactions in compound 1 and NCS···H‐N hydrogen‐bonding interactions and NCS—SCN interactions in compound 2 play a significant role in aligning the polymer strands in crystalline solids.     

Crystal structure of 1-hydroxy-1,2,3-benzotriazolium diphenyl phosphate reveals strong NHO and OHO hydrogen bonds

The structure of 1-hydroxy-1,2,3-benzotriazolium diphenyl phosphate (HOBt/DPP) has been investigated by X-ray analysis. The compound crystallizes in the monoclinic space group P2₁/n with Z = 4 and the following lattice parameters: a = 11.711(2), b = 12.727(2) and c = 12.794(3) Å, β = 105.12(2)°, V = 1840.9(6) ų. The structure was solved by direct methods and refined on F² to R values of wR2 = 0.084 and R1 = 0.034 for 1985 observed reflections. HOBt/DPP has an ionic structure with very short OHO and NHO hydrogen bonds linking the different ions. Owing to these hydrogen bonds, infinite screw-shaped chains which are twisted parallel to the y-axis are formed.     

Interface interactions in modulated phases,and upsilon points

Certain features in Frenkel-Kontorova and other models of phases with a one-dimensional modulation can be analyzed by assuming parallel interfaces separating sets of lattice planes belonging to two different phases, and treating the free energy to create interfaces, as well as the interaction of two, three, or more interfaces, as phenomenological parameters. A strategy employed by Fisher and Szpilka for interacting defects can be extended to the case of interfaces, allowing a systematic study of the phase diagram by ignoring all interface interactions, and then successively taking into account pair, triple, and higher-order terms. The possible phase diagrams which can occur near the point where =0 include: various sorts of endpoints analogous to critical endpoints, an accumulation point of first-order transitions and triple points, and a self-similar structure which we call an upsilon point, which turns out to be an accumulation point of an infinite number of segments of first-order transition lines, each of which terminates in two upsilon points.     

Polyhedral clathrate hydrates of a strong base: Phase relations and crystal structures in the system tetramethylammonium hydroxide-water

The tetramethylammonium hydroxide-water system has been studied by low-temperature differential thermal analysis and X-ray powder diffraction. The melting diagram was constructed for concentrations between 66.7 and 100 mol% H₂O. It shows the existence and stability ranges of as many as eight crystalline hydrate phases:- and-Me₄NOH·2H₂O (phase transition at –85°C, decomposition atca. 105°C), Me₄NOH·4 H₂O (melting point 44°C, incongruent), and-Me₄NOH·5 H₂O (phase transition at 42°C, melting point 68°C, congruent),- and-Me₄NOH·7.5 H₂O (phase transition at 6°C, melting point 16°C, incongruent), and Me₄NOH·10 H₂O (melting point –20°C, incongruent). The structures of all these phases, except the already known one of-Me₄NOH·5 H₂O, were determined from single-crystal MoK diffractometer data. The decahydrate and the high-temperature forms of the 7.5-hydrate and the pentahydrate are genuinepolyhedral clathrate hydrates, the first ones reported of a strong base. Their mostly novel three-dimensional anionic host structures, formed by the hydrogen-bonded OH^– ions and H₂O molecules, arefour-connected throughout, in spite of their proton deficiency which is apparently leveled by disorder. Disorder also affects the enclosed cationic Me₄N⁺ guest species. Like the low-temperature form of the pentahydrate, that of the 7.5-hydrate has a clathrate-related, but not fully polyhedral structure, some of the oxygen atoms being three-connected only. The tetrahydrate presents the rare case of both a hydrogen bond of the type OH^–...OH₂ and a (deprotonated) water-channel structure. This is fully ordered and apart from that can be derived from the polyhedral one of the-pentahydrate just by removing the appropriate number of water molecules from certain positions. The structures of- and-Me₄NOH·2 H₂O contain identical one-dimensionalspiro chains [HO^–(HOH)_/42] with the hydroxide protonnot participating in the hydrogen bonding. The Me₄N⁺ ion is ordered in the and disordered in the phase.Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82076 (66 pages).Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Modified AutoDock for accurate docking of protein kinase inhibitors

Protein kinases are an important class of enzymes controlling virtually all cellular signaling pathways. Consequently, selective inhibitors of protein kinases have attracted significant interest as potential new drugs for many diseases. Computational methods, including molecular docking, have increasingly been used in the inhibitor design process [1]. We have considered several docking packages in order to strengthen our kinase inhibitor work with computational capabilities. In our experience, AutoDock offered a reasonable combination of accuracy and speed, as opposed to methods that specialize either in fast database searches or detailed and computationally intensive calculations.However, AutoDock did not perform well in cases where extensive hydrophobic contacts were involved, such as docking of SB203580 to its target protein kinase p38. Another shortcoming was a hydrogen bonding energy function, which underestimated the attraction component and, thus, did not allow for sufficiently accurate modeling of the key hydrogen bonds in the kinase-inhibitor complexes.We have modified the parameter set used to model hydrogen bonds, which increased the accuracy of AutoDock and appeared to be generally applicable to many kinase-inhibitor pairs without customization. Binding to largely hydrophobic sites, such as the active site of p38, was significantly improved by introducing a correction factor selectively affecting only carbon and hydrogen energy grids, thus, providing an effective, although approximate, treatment of solvation.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Energetic and topological analyses of the oxidation reaction between Mo(n) (n = 1, 2) and N2O

The interaction between molybdenum, atom, and dimer, with nitrous oxide has been investigated using density functional theory. The analysis of the potential energy surfaces for both reactions has revealed that a single molybdenum atom can activate the N--O bond of N2O requiring a small activation energy. However, the presence of several intersystem crossings between three different spin states, namely, septet, quintet and triplet states, seems to be the major constraint to the Mo + N2O reaction. Contrarily, the low-lying excited states (triplet and quintet) do not participate in the reaction between the molybdenum dimer and N2O. The latter reaction fully evolves on the singlet spin surface. Three different regions have been distinguished along the pathway: formation of an adduct complex, formation of an inserted compound, and the N2 detachment. The connection between the two first regions has been characterized by the formation of a special complex in which the N--O bond is so weakened that it could be considered as a first step in the insertion process. It has been shown that the topological changes along the pathways provide a clear explanation for the geometrical changes that occur along the reaction pathway. In summary, the detachment of the N2 molecule is found to be kinetically an effective process for both reactions, owing to the high exothermicity and consequently to the high internal energy of the insertion intermediates. However, in the case of Mo atom, the reaction should be a slow process due to the presence of spin-forbidden transitions. These results fully agree with previous experimental works.     

Intermolecular-medium and intramolecular-weak hydrogen bonding chains in the crystals of chiral trifluoromethylated amino alcohols

A structural feature of hydrogen bonding chains found in the crystals of trifluoromethylated amino alcohols is reported. Hydrogen bondings of 3-(N,N-dialkylamino)-1,1,1-trifluoro-2-propanols construct chiral spiral hydrogen bonding chains. Lone pairs on the nitrogen atoms of the amino alcohols participate in two hydrogen bondings. Detailed structural analysis of the hydrogen bonds of the 3-(N,N-dimethylamino)-1,1,1-trifluoro-2-propanol suggested that the chain built up with alternating intermolecular-medium and intramolecular-weak hydrogen bonds. The medium intermolecular hydrogen bond, which transfers a proton from the hydroxy group to the amino nitrogen, would make a tentative zwitterionic form of the molecule. Then, electrostatic attraction between the charges in the zwitterion centers induced a weak intramolecular hydrogen bond.     

Solid-State NMR Study of Phase Separation and Order of Water Molecules and Silanol Groups in Polysiloxane Networks

Homogeneity and structure of organically modified polysiloxane networks prepared by sol-gel co-condensation, as well as location and nature of water molecules and silanol groups were studied by 1D and 2D solid-state NMR. ¹H–²⁹Si and ¹H–¹H interatomic distances were estimated from variable contact-time CP/MAS experiments, ¹H NMR chemical shifts and off-resonance WISE NMR. A structure model of these networks is proposed and discussed. The fraction of proton-inaccessible units Q⁴ in the networks decreases with increasing amounts of dimethylsiloxane (D) and methylsiloxane (T) units. In contrast to systems prepared by co-condensation of tetraethoxysilane (TEOS) with dimethyl(diethoxy)silane (DMDEOS), proton-inaccessible units form essential fraction in networks prepared by co-condensation of TEOS with methyl(triethoxy)silane (MTEOS). The proton-accessible part of the networks with high O/Si ratios is nano-heterogeneous phase, which is composed of water containing Q ⁱ particles separated by copolymer domains. The overall homogeneity and uniformity of binding sites around silanol groups increases by co-condensation TEOS with DMDEOS or MTEOS, while the amount of physisorbed water as well as the hydrogen bond strength decreases, as compared with neat silica gel prepared by polycondensation of TEOS.