Solid-phase synthesis of lipidated peptides

A new flexible and efficient methodology for the solid-phase synthesis of lipidated peptides has been developed. The approach is based on the use of previously synthesized building blocks and overcomes the limitations of previously reported methods, since long doubly lipidated peptides can be synthesized by using this route. Furthermore, it was thus possible to prepare a large number of N- and H-Ras peptides bearing a wide range of reporter and/or linking groups--efficient tools for the investigation of biological processes. In terms of efficiency and flexibility this solid-phase method is superior to the solution-phase synthesis. It gives pure peptides in multimilligram amounts within a much shorter time and with superior overall yield.     

A novel synthesis, including asymmetric synthesis, of 2,4,4-trisubstituted 2-cyclopentenones based on the reaction of 1-chlorovinyl p-tolyl sulfoxides with acetonitrile and its homologues

Reaction of 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from chloromethyl p-tolyl sulfoxide and ketones in high overall yields, with cyanomethyllithium (lithium α-carbanion of acetonitrile) gave adducts in high to quantitative yields. The adducts were treated with LDA followed by lithium α-carbanion of the homologues of acetonitrile to give 3,5,5-trisubstituted enaminonitriles in good to high yields. Hydrolysis of the enaminonitriles under acidic conditions gave 2,4,4-trisubstituted 2-cyclopentenones in good yields. By using the optically active chloromethyl p-tolyl sulfoxide and unsymmetrical ketones, this procedure gave the optically pure 2,4,4-trisubstituted 2-cyclopentenones. The scope and limitations of this method and the mechanism of the reactions are also discussed. These procedures offer a new and effective method for the synthesis of 2,4,4-trisubstituted 2-cyclopentenones from four components, ketones, chloromethyl p-tolyl sulfoxide, acetonitrile, and its homologues.     

An expedient, regioselective synthesis of 2-alkylamino- and 2-alkylthiothiazolo[5,4-e]indoles

1-Benzenesulfonyl-5-aminoindole 5, prepared from 5-nitroindole 3, was condensed with alkyl isothiocyanates and separately with carbon disulfide and alkyl bromides/iodides to furnish efficiently the corresponding N-alkyl-thioureidoindoles 6a-c and the alkyl N-(indol-5′-yl)dithiocarbamates 9a-e, respectively. Their cyclisation using N-bromosuccinimide (NBS) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), in the cold, followed by indolic N-deprotection, furnished regioselectively the 2-alkylamino- and the 2-alkylthiothiazolo[5,4-e]indoles 8a-c and 11a-e, respectively, in good overall yields.     

Li3AlB2O6： Synthesis, Crystal Structure, and Its Luminescence Property Compared with LiSrBO3

The synthesis and crystal structure of Li3AlB2O6 with different cell parameters are reported and these cells are transformed each other from the confirmation of crystallographic structural analyses. The absorption spectrum, luminescence and lifetimes of the Li3AlB2O6 and LiSrBO3 solid compounds are measured and the comparisons are made between them. It is shown that the absorption edges are at about 400 nm (or band gap 3.1 eV) and there is one of absorption peaks at about 350 nm for the Li3AlB2O6 and LiSrBO3. The emission band (530 nm) makes a red shift and fluorescence decay time (24.39 ns) of the Li3AlB2O6 becomes smaller compared with the emission band (480 nm) and lifetime (93.16 ns) of the LiSrBO3 at the visible region. The transition energies and oscillator strengths of the clusters (Li3AlB2O6)2 and (LiSrBO3)2 lying at low excited states are calculated by the time-dependent Hartree-Fock method. The obtained results are used to model the photophysical properties and discuss the origin of spectral bands of the Li3AlB2O6 and LiSrBO3.     

缬沙坦类似物合成中间产物的捕获(Ⅱ)

In this article we mainly discuss the effect of anion of Lewis acid on the structure of the intermediate in synthesis of valsartan analogue. The crystal belongs to monoclinic system with space group P2₁/c, and a=1.099 9(3) nm, b=1.913 4(5) nm, c=0.977 8(3) nm, β=104.806(4)°, V=1.989 5(9) nm³, D_c=1.708 g·cm^-3, Z=18. CCDC: 629931.     

Hydrothermal in situ Ligand Synthesis from 1,10-Phenanthroline-5,6-dione and Characterization of 1D Coordination Polymers [Co（bpdc）（H2O）3] · H2O and [Cu（bpy）V2O6]

Hydrothermal treatment of MCl2(M=Co or Cu), NH4VO3, and 1,10-phenanthroline-5,6-dione(pdon) resulted in the formation of a duplex coordination polymer [Co(bpdc)(H2O)3]·H2O(bpdc=2,2′-bipyridine-3,3′-dicarboxylate) and a chain-like coordination polymer [Cu(bpy)V2O6](bpy=2,2′-bipyridine). X-ray single-crystal structural analysis shows that under hydrothermal conditions and in the presence of different transition metals, the organic reagent pdon was transformed in situ into bpdc and bpy, respectively. Mechanism of the in situ ligand synthesis reaction has been discussed.     

新型四四硫富瓦烯环蕃的合成和性质

利用2,3-二(2-氰基乙硫基)-6,7-二烷硫基四硫富瓦烯在甲醇钠的作用下消除一个保护基团生成四硫富瓦烯单钠盐, 与1,4-二氯甲基苯反应, 形成“单桥”-双(四硫富瓦烯)衍生物, 生成的“单桥”-双(四硫富瓦烯)衍生物再次在甲醇钠的作用下消除剩下的保护基团, 形成“单桥”-双(四硫富瓦烯)衍生物二钠盐, 最后与二溴代烷反应形成新型四四硫富瓦烯环蕃, 并通过循环伏安法和化学氧化法分别对其氧化还原性质和紫外光谱进行了研究.     

加料方式对CuO/ZnO/Al2O3系催化剂前驱体性质的影响

用XRD、TG-DTG、TPR技术研究了不同加料方式对CuO/ZnO/Al2O3系催化剂前驱体物相组成及其结晶情况的影响，用加压微反装置考察了催化剂合成甲醇反应活性。结果表明, 加料方式对Cu2+形成的中间化合物的物相组成及结晶度影响显著,对Zn2+及Al3+的沉淀物相的影响很小。不同加料方式对催化剂前驱体物相组成及催化剂性能的影响主要是形成的初始前驱体中Cu的物相及结晶度不同。正加法主要形成Cu2(OH)3NO3,并流法主要形成无定形Cu2CO3(OH)2,后者与Zn5(CO3)2(OH)6相互作用转化为(Cu,Zn)2CO3(OH)2和（Cu,Zn）5(CO3)2(OH)6，由它们分解形成的CuO-ZnO固溶体是合成甲醇反应的活性相。并流法能最大程度的形成CuO-ZnO固溶体，有利于CuO粒子的细化，其催化活性较好。     

3-(D-葡萄糖-1-基)-6-芳基-7H-1，2，4-三唑并[3，4-b][1，3，4]噻二嗪类化合物的合成及波谱研究

ω-溴代芳香基乙酮与3-(D-葡萄糖-1-基)-4-氨基-5-巯基-1，2，4-三唑反应 合成了一系列新颖的3-(D-葡萄糖-1-基)-6-芳基-7H-1，2，4三唑并[3，4-b[1，3 ，4]噻二嗪．用元素分析，IR，NMR，MS对其结构进行了表征，研究了其NMR波谱特 征，并以^1H-^1H COSY，^13C-^1H COSY，COLOC二维NMR技术对其^1H NMR，^13C NMR的谱峰进行了全归属     

ZrO_2/S_2O_8~(2-)固体超强酸高效催化合成二芳砜化合物

报道了以ZrO_2／S_2O_8～(2-)固体超强酸为催化剂，在无溶剂条件下，依照 傅一克反应的原理，由芳香磺酰氯与芳香化合物作用合成了一系列二芳砜化合物， 收率为79％～93％．此方法具有操作简便，催化剂价廉易得、活性高、对环境友好 、可回收重复使用等优点．