A density functional study on magnetic exchange interaction between Mn(II) ion and nitronyl nitroxide radical in <Emphasis Type="Italic">trans</Emphasis>-and <Emphasis Type="Italic">cis</Emphasis>-metal-radical complexes

The magneto-structural correlation between a Mn(ll) ion, coordinated in an octahedral environment, and two nitronyl nitroxide radical ligands in trans- and cis-metal-radical complexes is investigated by the broken symmetry (BS) approach within density functional theory (DFT). The dependences of coupling constants J on three structural parameters: (i) bond angle θ (Mn-O-N (nitroxide)); (ii) rotating angle ψ, defined by the nitronyl nitroxide radical plane rotating around the axial Mn-O (nitroxide); (iii) bond distance R (Mn-O (nitroxide)) are directly calculated. Our calculations showed that both trans- and cis-Mn(ll)-radical complexes behave a stronger antiferromagnetic interaction, consistent with experiments. In view of molecular orbital theory, the direct exchanges, including σ-type and π-type exchanges, are responsible for the magnetic exchange pathways. There is a preferable linear correlation between the calculated coupling constants J and the overlap integral squares S b between the local magnetic orbitals at the various rotating angle ψ at the fixed bond angle θ and bond distance R, in both trans- and cis-Mn(ll)-radical complexes.     

Adsorption of the fluoride ion on the surface of various faces of a single crystal of silver: a quantum-chemical study

The fluoride ion adsorption from a gas phase on various faces of a single crystal of silver is studied by a density functional method within a cluster model for metal. The adsorption bond energy is found to increase in the series Ag(100) < Ag(111) < Ag(311) < Ag(110). A substantial structural and energetic heterogeneity of various adsorption sites is revealed. The results are utilized to simulate the electrochemical interface between individual faces of a single crystal of silver and aqueous solutions containing the fluoride ion. It is assumed that the adsorption potential may be represented as the sum of two contributions, one of which describes the metal–ion interaction and the other, the ion solvation energy. The plotted adsorption terms take into account partial degradation of the fluoride ion when adsorbed from an aqueous solution. Estimates of discreteness of the electrical double layer are presented. A conclusion on the maximum manifestation of specific adsorption of the fluoride ion for the Ag(100) face is made.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 232–238.Original Russian Text Copyright © 2005 by Nazmutdinov, Zinkicheva.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

A density functional study of propylene glycol conversion to propanal and propanone of various acid-catalyzed reaction models: a water-addition effect

The acid-catalyzed models on reaction mechanisms of pinacol rearrangement of propylene glycol conversion to propanal and propanone have been investigated using the density functional method at 298.15 K. Thermodynamic quantities of activation steps of four water-addition models were obtained. The number of added water interacting with the transition states of three concerted pathways has obviously affected the product ratio. The relative energetic profiles of the conversion reactions of all solvation models have been comparatively displayed. Estimation of the percent ratio of product composition computed from activation free energies of each acid-catalyzed reaction model was carried out. The percent ratios of propanal and propanone were decreased as the number of added water increased.     

用TMS—2型热机分析仪测量热释蠕变

对已经商品化的Perkin-Elmer TMS-2型热机分析仪进行改进,用来测量聚合物材料的热释蠕变行为。按照7SCr分步加载的程序,用弯曲法测量了-83～300℃温度范围内低密度聚乙烯的玻璃化转变松弛过程,并从TSCr谱上计算其相应的分子参数,实验结果与用扭转的TSCr方法所得结果相等,因此这是一种研究聚合物材料松弛行为的方便可行的技术。     

疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

NMR and Excess Volumes Studies in DMF–Alcohol Mixtures

Chemical shifts of the alcohol and DMF protons in DMF–alcohol mixtures with the mole fraction of alcohol are reported in order to study the hydrogen bond interaction present in the mixtures. The densities of DMF–methanol mixture at 22°C are also measured. Excess volumes and excess chemical shifts are correlated by the Redlich–Kister equation. The relation between excess volumes and excess chemical shifts in the mixtures is discussed. It is found that the maximum excess chemical shifts ^E(CHO-OH) and ^E(CH₃-OH) are positioned at about mole fraction methanol = 0.57 for the DMF–methanol system, as is V ^E. The results show that the NMR spectral method offers a valuable approach to similar future studies of interactions in mixtures.     

The Physical Basis of the VSEPR Model

The VSEPR model is a consequence of the correlation of same-spin electrons resulting from the operation of the Pauli exclusion principle. Although the VSEPR rules can be interpreted in terms of an orbital model they do not provide the physical basis for the model.