Zone specificity in low energy electron stimulated desorption of Cl from reconstructed Si(1 1 1)-7 × 7:Cl surfaces

Diffraction in electron stimulated desorption has revealed a propensity for Cl⁺ desorption from rest atom vs. adatom areas and unfaulted vs. faulted zones of Cl-terminated Si(1 1 1)-(7 × 7) surfaces. We associate the 15 eV ± 1 eV threshold with ionization of Si-Cl σ-bonding surface states and formation of screened two-hole states with Si 3s character. Similar specificity is observed from A and B reconstructions. This can be due to reduced screening in unfaulted regions and increased hole localization in Si back-bonds within faulted regions.     

同步辐射讲座 第二讲 同步辐射X射线荧光及其在植物微量元素分析中的应用

比较了同步辐射（SR）X射线荧光（XRF），电子和质子激发的X射线谱，介绍了XRF谱的采集方法及数据处理方法（主要是能谱方法），智能方法的无标样（基本参数法）定量分析原理，以及近期在植物微量元素分析中得到的结果。     

8β-hydroxyeremophil-7(11)-ene-12,8α(4β,6α)-diolide分子的晶体结构

运用层析法、结晶法从狭苞橐吾全草中分离得到艾里莫芬烷型倍半萜8β-hydroxyeremophil-7(11)-ene-12,8α(4β,6α)-diolide化合物,并通过质谱、核磁共振氢谱和碳谱、氢核-氢核相关谱、异核多量子相干谱和异核多键相干谱进行结构鉴定．其单晶经X射线衍射测试表明,其晶体属正交晶系,空间群为P212121,晶胞参数为: a=6．8519(5),b=10．7191(8),c=18．5942(14)A,V=1365．67(18) A3,Z=4,Dc=1．354 mg／m3．F(000)=592,μ=0．101 mm-1     

Finite Element Solution of Conical Diffraction Problems

This paper is devoted to the numerical study of diffraction by periodic structures of plane waves under oblique incidence. For this situation Maxwell's equations can be reduced to a system of two Helmholtz equations in R ² coupled via quasiperiodic transmission conditions on the piecewise smooth interfaces between different materials. The numerical analysis is based on a strongly elliptic variational formulation of the differential problem in a bounded periodic cell involving nonlocal boundary operators. We obtain existence and uniqueness results for discrete solutions and provide the corresponding error analysis.     

Synthesis and characterisation of cadmium titanium oxide thin films by sol-gel technique

Crack free, dense and transparent CdTiO₃ thin films have been prepared by sol-gel technique using titanium butoxide and cadmium acetate. The formation of the CdTiO₃ phase started from 500°C annealing temperature onwards. The complete orthorhombic structure of CdTiO₃ was formed on Silicon (100) substrate at an annealing temperature of 600°C for 5 h. As the annealing temperature increased from 600 to 700°C, we have observed the cadmium silicate phase at the interface of Si and CdTiO₃ phase. Structural, morphological and elemental evolution of these CdTiO₃ thin films produced by sol-gel synthesis were characterised by grazing incidence X-ray diffraction (GIXRD), tapping mode atomic force microscopy (TMAFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) respectively.     

激光产生的铝、硅、氧、铜、硒等离子体X光谱

利用长晶格的OHM晶体谱仪,从激光等离子体中获得丰富的铜、硒类氖、类氟、类钠离子的二、三、四级软X射线衍射光谱和铝、氧、硅的类氢、类氦、类锂离子一到四级谱,波长在14～40(?)之间,在此基础上,本文较为细仔地分析了各光谱结构.     

利用CCD光电测量系统测量杨氏弹性模量

提出一种测量微小伸长量的光电测量方法,即利用CCD光电测量系统将单缝衍射的光强分布转换为电信号,经过计算机处理后输出光强分布曲线,从相邻波谷读出衍射条纹间隔,通过软件的简单操作直接输出测量结果.实现了数据采集及运算结果的实时化、半自动化,并克服了传统方法的测量困难和数据处理的复杂计算.利用这一方法测定了钢丝的杨氏弹性模量,与标称值符合得较好.     

关于康托集类光栅的实验探究

设计制作了康托集分形衍射光栅,通过对康托集分形光栅3个阶段的夫琅禾费衍射现象的观察,根据惠更斯-菲涅耳原理,得到了一维康托集分形光栅的夫琅禾费衍射光强分布特性.     

动态激光衍射法测量细丝直径

基于夫琅禾费衍射理论和巴比涅互补原理,提出了利用激光衍射对细丝直径进行动态测量的方法.该方法具有测量精度高、速度快、非接触、使用方便且易于微机联接实现自动化测量等优点.