Diffusion study of multi-organic layers in OLEDs by ToF-SIMS

A model organic light-emitting diodes (OLEDs) with structure of tris(8-hydroxyquinoline) aluminum (Alq₃)/N,N′-diphenyl-N,N′-bis[1-naphthy-(1,1′-diphenyl)]-4,4′-diamine (NPB)/indium tin oxide (ITO)-coated glass was fabricated for diffusion study by ToF-SIMS. The results demonstrate that ToF-SIMS is capable of delineating the structure of multi-organic layers in OLEDs and providing specific molecular information to aid deciphering the diffusion phenomena. Upon heat treatment, the solidity or hardness of the device was reduced. Complicated chemical reaction might occur at the NPB/ITO interface and results in the formation of a buffer layer, which terminates the upper diffusion of ions from underlying ITO.     

AB5型球形合金粉的表面处理研究

由雾化（Gas－atomization）技术制备的AB5型球形合金粉，作为镍氢电池负极材料具有很多优点：粉粒呈球状便于在多孔基片内装填；耐压耐磨性好；抗碱能力强且不易解胶．但它的电化学初活性差，难于活化．有碍电池中的应用．采用适宜的氧化剂（铜盐水溶液）处理，使球粒表面形成一个富铜、富镍亚层，显著地改善了合金粉的电化学活性．经处理的MlNi3.8CO0.5Mn0.3Al0.4球形合金粉，仅3次充放电循环其放电量便可达到240mA·h·g-1；而未经处理的同一合金粉即便经6次充放电循环其放电量也只有103mA·h·g-1．     

高效液相色谱法所用大孔硅胶填料的制备

对国产ＧＹＱＧ球形硅胶施加高压水热处理并进行扩孔，制备了用于高效液相色谱法的大孔硅胶填料，考察了扩孔压力，扩孔温度和扩孔时间对平均孔径和比表面积的影响。并将产品日本ＳＩＬ－３００３×１０＾－８ｍ硅胶进行了物理性质和孔分布的对比实验，结果表明ＧＹＱＧ硅胶扩孔后平均孔径为２０～３０ｎｍ接近日本ＳＩＬ－３００３×１０＾－８ｍ硅前平平均孔径２５ｎｍ。display structure     

硼酸酯偶联剂的合成与表征

通过分子结构设计，合成了一种氮一硼内配位结构的硼酸酯偶联剂，解决了硼酸酯水解稳定性差的问题，同时分子结构中含有氨基、丁氧基等活性基团。用傅立叶变换红外光谱对硼酸酯进行了结构表征，讨论了原料配比、合成工艺等对硼酸酯收率及反应速率的影响，并通过实验确定了最佳配方及工艺。对硼酸酯的物理性能、溶解性、水解稳定性及对硼酸铝晶须的表面处理效果进行了表征。结果表明：合成的硼酸酯偶联剂由于具有氮-硼内配位作用，表现出优良的水解稳定性，并且硼酸酯偶联剂对硼酸铝晶须具有良好的表面改性效果。     

Evaluation of Photocatalytic Activity of Transparent Anatase Nanocrystals-Dispersed Silica Films Prepared by the Sol-Gel Process with Hot Water Treatment

Anatase nanocrystals were precipitated mainly at the surface of the silica-titania gel films with hot water treatment, whereas the addition of poly(ethylene glycol) (PEG) in the films led to the dispersion of anatase nanocrystals in the whole of the films after the treatment. Both films with and without PEG showed high photocatalytic activities for acetaldehyde, NO _x and stearic acid in the gas-solid system, and for methylene blue and potassium iodide in the liquid-solid system. The addition of PEG improved the photocatalytic activities of the resultant films due to the smaller anatase crystallites and the porous film structure. The residual silica under-layer of the superficially anatase-precipitated films is expected to act as a protective one for an organic polymer substrate against the photocatalytic degradation.     

树脂吸附法处理水杨酸甲酯生产废水的研究

采用吸附树脂NDA—99处理水杨酸甲酯生产废水，结果表明该树脂时废水中的5磺基水杨酸及水杨酸均具有良好的吸附—脱附性能．废水经预处理和吸附处理后，CODCr由57000-59000mg／L降至6300mg／L左右，去除率接近89％．用IBV8％NaOH 3BVH2O作脱附剂，在温度为60℃、流量为IBV／h的条件下，脱附率接近100％，树脂可重复使用．高浓度脱附液经酸化、浓缩、冷却结晶，可回收5—磺基水杨酸，回收率为95％左右。纯度为78％。     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.