Existence of many ergodic absolutely continuous invariant measures for piecewise-expandingC 2 chaotic transformations in ℝ2 on a fixed number of partitions

Let Ω be a region in ℝⁿ and letp = P_i ) _i ^1m , be a partition ofΩ into a finite number of closed subsets having piecewise C² boundaries of finite(n - 1 )dimensional measure. Let τ:Ω→Ω be piecewise C² onP where, τ_i = τ|p_i is aC ² diffeomorphism onto its image, and expanding in the sense that there exists α > 1 such that for anyi = 1, 2,...,m ‖Dτ_i ^-1 ‖ < α^-1, where Dτ_i ^-1 is the derivative matrixτ _i ^- 1 and |‖·‖ is the Euclidean matrix norm. By means of an example, we will show that the simple bound of one-dimensional dynamics cannot be generalized to higher dimensions. In fact, we will construct a piecewise expanding C² transformation on a fixed partition with a finite number of elements in ℝ², but which has an arbitrarily large number of ergodic, absolutely continuous invariant measures     

关于CVD 矩阵的n- 宽度

本文证明了d_2k =δ_2k =d^2k ≥b_2k，其中d_2k ,δ_2k , b_2k分别表示Ａ（Ｂｌ^M_p）在ｌ^N_q下的Ｋｏｌｍｏｇｏｒｏｖ，线性，Ｂｅｒｎｓｔｅｉｎ ２ｋ－宽度，ｄ^2k 表示Ａ^Ｔ（Ｂｌ^N相似文献   

N2（A）及N（2D）对IF（X）的传能研究

在微波放电系统中,对NH_3-F-F_2-CF_3I体系进行研究,结果表明,向IF(X)传能的诸多媒介中,N_2(A)及N(~2D)起着主要作用,并且这一结论在经微波激发后的N_2与CF_3I的直接反应中得到了进一步证实。     

Line Narrowing of a Tunable High Pressure CO2 Laser by Means of an Improved Non-Littrow Cavity

A model is reported to foresee ,for different mirror choices, the spectral properties of a high pressure, frequency tunable, CO₂ laser, operating with a non-Littrow grating mounting. The calculations show a larger frequency selectivity for not collimated plane cavities. The model is experimentally verified in a suitable high pressure laser. In particular narrowed linewidths less than 300MHz ( FWHM) are obtained.     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

Study of hot bands in the B2Σ+u-X2Σ+g system of C-2 anion

Optical heterodyne magnetic rotation enhanced velocity modulation spectroscopy was employed to observe the visible absorption spectra of the B^2Σ^+_u-X^2Σ^+_g electronic transition of C^-_2. Four hot bands (0,1), (1,2), (2,3) and (3,4) have been observed and the band (3,4) is measured directly for the first time, so far as we know, by absorption. A rotational analysis was carried out to obtain molecular constants. With the Franck－Condon principle and the vibrational Boltzmann distribution, we have estimated the vibrational temperature of C^-_2 to be about 3000K.     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

金催化化学发光新体系——苯并吡喃化学发光分析法测定金矿中的痕量金

本文提出了一种测定矿样中痕量金的化学发光分析法,氯化6,7-二羟基-2,4-二甲基苯并吡喃-H_2O_2化学发光体系,方法的检出限为7ppb。工作曲线线性范围是10～1000ppbAu,测定的相对标准偏差小于7％。应用本法测定矿样中的金,结果良好。     

Molecule-to-metal bonds: electrografting polymers on conducting surfaces.

Electrografting is a powerful and versatile technique for modifying and decorating conducting surfaces with organic matter. Mainly based on the electro-induced polymerization of dissolved electro-active monomers on metallic or semiconducting surfaces, it finds applications in various fields including biocompatibility, protection against corrosion, lubrication, soldering, functionalization, adhesion, and template chemistry. Starting from experimental observations, this Review highlights the mechanism of the formation of covalent metal-carbon bonds by electro-induced processes, together with major applications such as derivatization of conducting surfaces with biomolecules that can be used in biosensing, lubrication of low-level electrical contacts, reversible trapping of ionic waste on reactive electrografted surfaces as an alternative to ion-exchange resins, and localized modification of conducting surfaces, a one-step process providing submicrometer grafted areas and which is used in microelectronics.