正十六烷体系凝固过程的分子动力学模拟

采用分子动力学模拟的方法,根据体系热容和自扩散系数的突变,计算了正十六烷体系以及正十六烷和降凝剂α-辛基萘、α-十二烷基萘及α-十六烷基萘等α-烷基萘混合体系的凝点,凝点降低结果与实验值相一致.用径向分布函数及末端距离分布对凝固温度附近体系的微观结构变化进行了研究.结果表明,凝固过程中正十六烷分子倾向于转变成为全反式的构象,以利于分子间平行有序的排列,这和熵减小的原理相一致.结合正十六烷的构象变化,探讨了烷基萘降凝的机理.     

Sensitive determination of methadone in human serum and urine by dispersive liquid–liquid microextraction based on the solidification of a floating organic droplet followed by HPLC–UV

Dispersive liquid–liquid microextraction based on solidification of floating organic droplet was developed for the extraction of methadone and determination by high‐performance liquid chromatography with UV detection. In this method, no microsyringe or fiber is required to support the organic microdrop due to the usage of an organic solvent with a low density and appropriate melting point. Furthermore, the extractant droplet can be collected easily by solidifying it at low temperature. 1‐Undecanol and methanol were chosen as extraction and disperser solvents, respectively. Parameters that influence extraction efficiency, i.e. volumes of extracting and dispersing solvents, pH, and salt effect, were optimized by using response surface methodology. Under optimal conditions, enrichment factor for methadone was 134 and 160 in serum and urine samples, respectively. The limit of detection was 3.34 ng/mmL in serum and 1.67 ng/mL in urine samples. Compared with the traditional dispersive liquid–liquid microextraction, the proposed method obtained lower limit of detection. Moreover, the solidification of floating organic solvent facilitated the phase transfer. And most importantly, it avoided using high‐density and toxic solvents of traditional dispersive liquid–liquid microextraction method. The proposed method was successfully applied to the determination of methadone in serum and urine samples of an addicted individual under methadone therapy.     

Comparison of solidification of floating drop and homogenous liquid–liquid microextractions for the extraction of two plasticizers from the water kept in PET‐bottles

Two approaches based on solidification of floating drop microextraction (SFDME) and homogenous liquid–liquid microextraction (HLLE) were compared for the extraction and preconcentration of di‐(2‐ethylhexyl) phthalate (DEHP) and di‐(2‐ethylhexyl) adipate (DEHA) from the mineral water samples. In SFDME, a floated drop of the mixture of acetophenone/1‐undecanol (1:8) was exposed on the surface of the aqueous solution and extraction was permitted to occur. In HLLE, a homogenous ternary solvent system was used by water/methanol/chloroform and the phase separation phenomenon occurred by salt addition. Under the optimal conditions, the LODs for the two target plasticizers (DEHA and DEHP), obtained by SFDME–GC‐FID and HLLE–GC‐FID, were ranged from 0.03 to 0.01 μg/L and 0.02 to 0.01 μg/L, respectively. HLLE provided higher preconcentration factors (472.5‐ and 551.2‐fold) within the shorter extraction time as well as better RSDs (4.5–6.9%). While, in SFDME, high preconcentration factors in the range of 162–198 and good RSDs in the range of 5.2–9.6% were obtained. Both methods were applied for the analysis of two plasticizers in different water samples and two target plasticizers were found in the bottled mineral water after the expiring time and the boiling water was exposed to a polyethylene vial.     

Dispersive liquid–liquid microextraction based on solidification of floating organic drop combined with field‐amplified sample injection in capillary electrophoresis for the determination of beta(2)‐agonists in bovine urine

Dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME–SFO) was for the first time combined with field‐amplified sample injection (FASI) in CE to determine four β₂‐agonists (cimbuterol, clenbuterol, mabuterol, and mapenterol) in bovine urine. Optimum BGE consisted of 20 mM borate buffer and 0.1 mM SDS. Using salting‐out extraction, β₂‐agonists were extracted into ACN that was then used as the disperser solvent in DLLME–SFO. Optimum DLLME–SFO conditions were: 1.0 mL ACN, 50 μL 1‐undecanol (extraction solvent), total extraction time 1.5 min, no salt addition. Back extraction into an aqueous solution (pH 2.0) facilitated direct injection of β₂‐agonists into CE. Compared to conventional CZE, DLLME–SFO–FASI–CE achieved sensitivity enhancement factors of 41–1046 resulting in LODs in the range of 1.80–37.0 μg L^?1. Linear dynamic ranges of 0.15–10.0 mg L^?1 for cimbuterol and 15–1000 μg L^?1 for the other analytes were obtained with coefficients of determination (R²) ≥ 0.9901 and RSD% ≤5.5 (n = 5). Finally, the applicability of the proposed method was successfully confirmed by determination of the four β₂‐agonists in spiked bovine urine samples and accuracy higher than 96.0% was obtained.     

铈对M2高速钢凝固组织的作用

研究了Ｃｅ对Ｍ２高速钢凝固组织的影响及其作用机制。发现Ｃｅ在高速钢中可减轻Ｗ,Ｍｏ等合金元素的偏析,使共晶碳化物量减少并细化;Ｃｅ主要偏聚在晶界共晶碳化物与奥氏体的界面上,并有部分Ｃｅ参与形成含Ｃｅ的Ｍ２Ｃ碳化物;Ｃｅ促进共晶碳化物在高温加热时的断网和团球化。     

微量元素Sr对Al—Si合金凝固过程的影响

用差热分析法系统地研究了Sr对Al-Si共晶、亚共晶及超共晶合金的动态凝固过程的影响。结果表明,Sr既可促进α-Al成核,使其初晶析出温度比二元合金中α-Al相析出温度明显提高,又能抑制初晶Si成核,使超共晶中初晶Si相析出温度较二元合金中Si的初晶的实际析出温度明显降低,还能促使共晶合金成核,使加Sr后的共晶析出温度明显提高。