Reactions of CF3-enones with ethyl nitroacetate and nitromethane: synthesis of CF3-γ-nitroketones

Reactions of α,β-unsaturated CF₃-ketones with nitromethane and ethyl nitroacetate have been investigated. We found that α,β-unsaturated trifluoromethylketones react with ethyl nitroacetate in the presence of calcinated potassium fluoride to form two classes of 1,4-conjugated addition products: CF₃-γ-nitroketones and 6,6,6-trifluoro-2-nitro-5-oxohexanoates in nearly quantitative yields. The products obtained are precursors for CF₃-pyrrolidine synthesis.     

Determination of interferon-gamma in Chinese hamster ovary cell culture supernatant by coupled-column liquid chromatography

A robust tandem HPLC method coupling size-exclusion (Shodex Asahipak GS-320HQ) and reversed phase (Vydac 218TP54) columns with ultraviolet detection was developed for quantitative determination of interferon-gamma (IFN-gamma) in Chinese hamster ovary cell culture supernatant. The 2D-HPLC system was linked up by a 6-port 2-position low hold-up volume switch valve. Compared to a commercial ELISA kit for IFN-gamma, the coupled column LC approach was able to detect and quantify soluble IFN-gamma, regardless of the glycoprotein's molecular/conformational variability and sample background. Each LC-LC analysis took 90 minutes inclusive of column regeneration. The relative standard deviation of measurements (n = 5) was less than 3%. The limit of detection (LOD) was determined to be 0.35 microg IFN-gamma.     

Three-dimensional quantitative structure-activity relationships of steroid aromatase inhibitors

Summary Inhibition of aromatase, a cytochrome P450 that converts androgens to estrogens, is relevant in the therapeutic control of breast cancer. We investigate this inhibition using a three-dimensional quantitative structure-activity relationship (3D QSAR) method known as Comparative Molecular Field Analysis, CoMFA [Cramer III, R.D. et al., J. Am. Chem. Soc., 110 (1988) 5959]. We analyzed the data for 50 steroid inhibitors [Numazawa, M. et al., J. Med. Chem., 37 (1994) 2198, and references cited therein] assayed against androstenedione on human placental microsomes. An initial CoMFA resulted in a three-component model for log(1/K_i), with an explained variance r² of 0.885, and a cross-validated q² of 0.673. Chemometric studies were performed using GOLPE [Baroni, M. et al., Quant. Struct.-Act. Relatsh., 12 (1993) 9]. The CoMFA/GOLPE model is discussed in terms of robustness, predictivity, explanatory power and simplicity. After randomized exclusion of 25 or 10 compounds (repeated 25 times), the q² for one component was 0.62 and 0.61, respectively, while r² was 0.674. We demonstrate that the predictive r² based on the mean activity (Y_m) of the training set is misleading, while the test set Y_m-based predictive r² index gives a more accurate estimate of external predictivity. Using CoMFA, the observed differences in aromatase inhibition among C6-substituted steroids are rationalized at the atomic level. The CoMFA fields are consistent with known, potent inhibitors of aromatase, not included in the model. When positioned in the same alignment, these compounds have distinct features that overlap with the steric and electrostatic fields obtained in the CoMFA model. The presence of two hydrophobic binding pockets near the aromatase active site is discussed: a steric bulk tolerant one, common for C4, C6-alpha and C7-alpha substitutents, and a smaller one at the C6-beta region.     

Synthesis and Characterization of (βDiketonate)(7-norbornadienyl acetate)Copper(l) Complexes,Single-Crystal Structure of (hfac)Cu(7-AcO-NBD)

Copper(I) complexes of general formula (β-diketonate)Cu(7-AcO-NBD), where 7-AcO-NBD = 7-norbornadienyl acetate and β-diketonate = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate (1), 1,1,1-trifluoro-2,4-pentanedionate (2), 2,4-pentanedionate (3), 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionate (4), 4,4,4-trifluoro-1-phenyl-1,3-butanedionate (5), were prepared from reactions of CuCl with Na(β-diketonate) in the presence of 7-AcO-NBD. AH compounds were characterized by elemental analyses, ¹H, ¹³C, ¹⁹F NMR and IR spectra. Single-crystal strucutre of compound 1 was determined by X-ray diffraction analysis that showed a mononuclear copper species with coordination of a chelating β-diketonate ligand through two oxygen atoms and the 7-AcO-NBD through its C? C double bond and an oxygen atom in the solid state. For compound 1, the crystal data are: triclinic, space group $ {\rm P}\bar 1 $, a= 5.4519(14) Å, b= 11.852(3) Å, c= 13.304(3) Å, α = 74.721(20)° β = 80.220(20)°, γ= 76.848(19)°, Z = 2, R_F = 0.060 and R_w = 0.064. Hot-wall chemical vapor deposition experiments revealed that compound 1 is suitable as a precursor for deposition of copper films in the temperature range 170–260 °C.     

Synthesis and polymerization of coupled compounds of 1,11-dodecadiyne

The dimer, trimer, and tetramer of 1,11-dodecadiyne, HC?C? (CH₂)₈? C?CH, were synthesized. The solid-state polymerization of the dimer was investigated by infrared (IR) spectroscopy. IR bands due to the diacetylene moiety were identified through the comparison of the IR spectra of the dimer, trimer, and tetramer. The dimer was found to have two polymorphs, melt-crystallized and solution-crystallized. Both of the polymorphs undergo solid-state polymerization by exposure to γ-ray or UV irradiation. The former has higher polymerizability for the diacetylene moiety than the latter. The solid-state polymerization of the terminal acetylene group was not observed. It is shown that the previously reported dimer structure in which both the diacetylene and terminal acetylene groups are polymerized to form an inherently electrically conducting polymer is incorrect. © 1995 John Wiley & Sons, Inc.     

The Chemistry of Tetrafluoroallene： One－pot Synthesis of Trifluoromethylindolizines from 1,3－Diiodo－1,1,3,3－tetrafluoropropane by 1,3－Dipolar Cycloaddition

Heating a mixture of 1, 3-diiodo-1, 1, 3, 3-tetrafluoropropane (2), K2CO3, pyridinium bromides (3) in CH3CN at 65℃ for 10 h gives the corresponding trifluoromethylindolizines.     

Application of Cyclodextrins to the Extraction of Antioxidant Compounds from Olive Oil

Olive oil contains powerful antioxidant compounds which impart stability, contribute to various properties of it, and are valuable from the nutritional point of view. Their extraction with as mild conditions as possible led to its investigation using cyclodextrins as a tool. The inclusion ability of α-, β-, and γ-CD was estimated, and it has been demonstrated that the small cavity of α-CD as well as the wide one of γ-CD could enclose less effectively the antioxidant compounds of olive oil than the intermediate in shape cavity of β-CD. The highest yields of antioxidant compounds were achieved when olive oil was mixed with a 2%aqueous solution of β-CD and the resulting precipitate was treated with ethyl alcohol.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 18–21, January–February, 2005.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

Synthesis of arylidene derivatives of N-unsubstituted pyrrolin-2-ones

5-Alkyl(aryl)-3-arylidene-3H-pyrrolin-2-ones were synthesized by ammonolysis of their O-heteroanalogs or by the reactions of 5-alkyl(aryl)-3H-pyrrolin-2-ones with aromatic aldehydes. The structures of the compounds obtained were confirmed by ¹H NMR spectra.     

The Crystal Structure of Ba3Cu2Al2F16: a Relative of Ba4Cu2Al3F21

Ba₃Cu₂Al₂F₁₆ is monoclinic: a = 7.334(1)Å, b = 5.320(2)Å, c = 16.022(1)Å, β = 96.34(1)°, Z = 2. Its crystal structure was solved in the space group P2₁ (No. 4) from synchrotron X‐ray single crystal data using 2685 unique reflections (2639 with F_o/σ(F_o) > 4). The final R factor is 0.044. The structure consists of a succession along the c‐axis of the cell of three layers of two different kinds of sheets developing in the (a, b) plane. The first one, formulated [(AlF₅)₂]_∞^4— and hereafter named A, is built up from infinite cis‐chains of aluminium‐fluorine octahedra [AlF₆], linked by two vertices and distanced by a. The second one, formulated [Cu₂AlF₁₁]_∞^4— and named B, is bidimensional. It is constituted of distorted copper‐fluorine octahedra [CuF₆], linked by edges, which form infinite chains interconnected by three vertices of isolated [AlF₆] octahedra. The stacking sequence of the sheets is (A, B, B)_∞. The barium ions, 12‐coordinated, are inserted between the sheets. The crystal structure of Ba₃Cu₂Al₂F₁₆ is closely related to that of Ba₄Cu₂Al₃F₂₁. Only the proportion and the stacking sequence of the two kinds of sheets in the c‐direction differ, according to two different compositions and two different symmetries.