Vibrational Analysis of the A3Π0−X1Σ+ and B3Π1−X1Σ+ Subsystems of the GaBr Molecule

Abstract

The emission band spectrum of gallium monobromide has been excited in a dc hollow cathode discharge. bands of the ³Π_0,1?X¹Σ⁺ system, lying in the range from 340 to 370 nm have been recorded at high resolution and measured. The previous vibrational analysis has been revised and corrected. New vibrational assignment has been proposed and improved vibrational constants of the upper and lower electronic states have been determined.     

不同形状的光斑触发砷化镓光导开关

为研究使用不同形状光斑触发光导开关对光电导特性的影响,研制了12 mm间隙的半绝缘砷化镓光导开关,在不同的偏置电压下,使用波长为1 064 nm的不同能量的激光触发光导开关并进行了光电导测试。使用了不同形状的光斑(包括面状、线状和点状光斑)触发光导开关并进行了光电导特性的比较,讨论了触发光参数对光导开关特性的影响。对处于开关电极间不同位置的线状光斑触发特性进行了比较,结果显示,本征光电导和非本征光电导情况下光斑位置对光电流的影响正好相反。     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Microstructure and strain films using in-plane grazing analysis of GaN epitaxial incidence x-ray diffraction

This paper investigates the major structural parameters, such as crystal quality and strain state of （001）-oriented GaN thin films grown on sapphire substrates by metalorganic chemical vapour deposition, using an in-plane grazing incidence x-ray diffraction technique. The results are analysed and compared with a complementary out-of-plane x- ray diffraction technique. The twist of the GaN mosaic structure is determined through the direct grazing incidence t of （100） reflection which agrees well with the result obtained by extrapolation method. The method for directly determining the in-plane lattice parameters of the GaN layers is also presented. Combined with the biaxial strain model, it derives the lattice parameters corresponding to fully relaxed GaN films. The GaN epilayers show an increasing residual compressive stress with increasing layer thickness when the two dimensional growth stage is established, reaching to a maximum level of-0.89 GPa.     

Charge density of Ga<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Al<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sb

Charge density calculations and electronic band structures for Ga _x Al_{1 − x} Sb with x = 1.0, 0.5 and 0.0 are presented in this work. The calculations are performed using the empirical pseudopotential method. The charge density is computed for a number of planes, i.e. z = 0.0, 0.125 and 0.25 A ₀ by generating the potential through a number of potential parameters available in the literature. The virtual crystal approximation was applied for the semiconducting alloy. The characteristics of the band structure and charge density are observed to be affected by the potential parameters. Calculated band gaps and the nature of gaps are in good agreement with the experimental data reported. The ionicity is also reasonably in good agreement with other scales proposed in the literature; however the formulation needs to be improved. The present work also demands indirect experimental band gap for the alloy.      

基于金属有机骨架前驱体制备纳米磷化镍催化剂

采用镍基金属有机骨架化合物(Ni-MOF)为前驱体,通过低温碳化获得Ni@C,并通过磷化成功地制备了不同结构的磷化镍纳米颗粒。将所得材料应用于析氢反应(HER)催化剂,在Ni@C与红磷质量比为1∶1及热解温度为500℃时获得的Ni1P1-500表现出优异的电催化性能,在酸性介质中,电流密度为10 mA·cm-2时,过电位为178 mV,并展现了良好的循环性能。较小的Tafel斜率(62 mV·dec-1)揭示了析氢反应的机理为Desorption-Heyrovsky机制。优异的电催化性能可归因于磷化镍催化剂表面存在的质子受体(P位点)和氢化物受体(Ni位点)活性中心。     

Quantum Dot-Catalyzed Photoreductive Removal of Sulfonyl-Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl-protected phenols. For a series of aryl sulfonates with electron-withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD-binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

Quantum Dot‐Catalyzed Photoreductive Removal of Sulfonyl‐Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl‐protected phenols. For a series of aryl sulfonates with electron‐withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD‐binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

Effect of substrate texture on the growth of hematite nanowires

The effect of texture of iron foil substrate on the growth of hematite nanowires by annealing method has been investigated in detail. Three substrates of different textures were prepared from a [2 0 0] oriented iron foil by some simple processes. The hematite nanowires on these substrates were synthesized by annealing iron foil at 700 °C in moist oxygen. The growth pattern of nanowires on these substrates showed that the growth of hematite nanowires depends strongly on the iron substrate texture and [1 1 0] oriented iron grains are necessary for their growth. The samples were characterized by Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), Electron Back Scatter Diffraction (EBSD) and Raman Spectroscopy. We have also tried to explain the various observations on the mechanism of growth. Mainly, the presence of water vapor significantly enhanced the formation of hematite nanowires which resulted in a very dense and aligned growth of nanowires on the substrate areas of favorable texture. Finally, the study proved the substrate texture to be a powerful tool to control growth of nanowires and can be used efficiently for patterning and large scale synthesis of the nanowires.