A Simple Homoleptic Gallium(I) Olefin Complex: Mimicking Transition‐Metal Chemistry at a Main‐Group Metal?

The earth‐metal olefin complex [Ga ^I (COD)₂]⁺[Al(OR^F)₄]^? (COD=1,5‐cyclooctadiene; R^F=C(CF₃)₃) constitutes the first homoleptic olefin complex of any main‐group metal accessible as a bulk compound. It is straight forward to prepare in good yield and constitutes an olefin complex of a main‐group metal that—similar to many transition‐metals—may adopt the +1 and +3 oxidation states opening potential applications. Crystallographic‐, vibrational‐ and computational investigations give an insight to the atypical bonding between an olefin and a main‐group metal. They are compared to classical transition‐metal relatives.     

Design rule of indium bump in infrared focal plane array for longer cycling life

In light of the proposed equivalent method, a three-dimensional structural modeling of InSb infrared focal plane arrays (IRFPAs) is created, and the simulated strain distribution is identical to the deformation distribution on the top surface of InSb IRFPAs. After comparing the deformation features at different regions with the structural characteristics of IRFPAs, we infer that the flatness of InSb IRFPAs will be improved with a thinner indium bump array, and this inference is verified by subsequent simulation results. That is, when the diameter of indium bump is smaller than 20 μm, the simulated Z-components of strain on the whole top surface of InSb IRFPAs is uniform, and the deformation amplitude is small. When the diameter of indium bump is larger than 28 μm, the simulated Z-components of strain increases rapidly with the thicker indium bump, and the flatness of InSb IRFPAs is worsened rapidly. According to the changing trend of deformation amplitude with diameters of indium bump, and employing element pitches normalization method, a design rule of indium bump is proposed. That is, when the diameter of indium bump is shorter than 0.4 times the element pitch, the flatness of InSb IRFPAs is in an acceptable range. This design rule was supported by different IRFPAs with different formats delivered by several main research groups for achieving a longer cycling life.     

A Molecular Analogue of the C−H Activation Intermediate of the Silica-Supported Ga(III) Single-Site Propane Dehydrogenation Catalyst: Structure and XANES Signature

Propane dehydrogenation is an important field of research due to an increasing world-wide demand of propene while classical production routes through naphtha cracking are in decline. In that context, silica-supported Ga(III) sites, synthesized from surface organometallic chemistry principles, show high selectivity and stability in the propane dehydrogenation reaction. This performance is in significant contrast to the reported fast deactivation and lower selectivity of most Ga₂O₃ and CrO₃ based materials. The Ga-catalyzed propane dehydrogenation reaction is proposed to proceed through the formation of Ga alkyl intermediates for which it would be desirable to have detailed structural and spectroscopic information. Here, we prepare a consistent series of Ga(III) molecular complexes with varying numbers of alkyl and siloxide ligands; they are characterized by single crystal X-Ray diffraction and X-Ray Absorption Near Edge Structure analysis, which is known to be highly sensitive to the Ga coordination environment. We report in particular the structure and the spectroscopic signatures of [Ga(ⁱPr)(OSi(O^tBu)₃)₂(HOSi(O^tBu)₃)], a molecular mimic of the key proposed reaction intermediates in the Ga-catalyzed PDH reaction.     

低温热分析标准物质的研制

研制了两种0~100℃热分析标准物质,分别为金属镓和水杨酸苯酯标准物质。研制的标准物质具有良好的均匀性和稳定性,采用与NIST,LGC相应标准物质比较的方法定值。NIST为SRM 2234镓,其定值采用288.6~314.35 K范围内的绝热热量计测得温度及热量值;LGC用绝热法为水杨酸苯酯的熔化温度和熔化热定值,两种方法都可以直接溯源至SI单位。对定值结果的不确定度进行了分析和评定。镓和水杨酸苯酯标准物质的熔化温度分别为(29.77±0.20)℃(k=2),(41.81±0.34)℃(k=2);熔化热分别为(80.52±0.48)J/g(k=2),(88.94±0.62)J/g(k=2)。研制的两种标准物质满足国家标准物质的技术要求,申报已获批准。     

Platinum‐Promoted Ga/Al2O3 as Highly Active,Selective, and Stable Catalyst for the Dehydrogenation of Propane

A novel catalyst material for the selective dehydrogenation of propane is presented. The catalyst consists of 1000 ppm Pt, 3 wt % Ga, and 0.25 wt % K supported on alumina. We observed a synergy between Ga and Pt, resulting in a highly active and stable catalyst. Additionally, we propose a bifunctional active phase, in which coordinately unsaturated Ga³⁺ species are the active species and where Pt functions as a promoter.     

Tetracyanoquinodimethane Reduction by Complexed Guanidinyl‐Functionalized Aromatic Compounds

In this work, we report on the reduction of tetracyanoquinodimethane (TCNQ) with dicationic complexes of guanidinyl‐functionalized aromatic (GFA) electron donors. In contrast to reduction with free GFAs, milder reduction conditions were achieved, and this led to semiconducting materials with extended TCNQ π stacking. The charge on the TCNQ units was estimated from the structural data obtained by single‐crystal X‐ray diffraction analysis and from IR spectroscopic data. The electrical conductivity was studied and the activation energy of the semiconducting materials was estimated from the temperature dependence of the conductivity.     

有机二元酸-水体系中In(OH)_3/In_2O_3微纳材料的制备与表征

本文利用系列有机二元酸-水体系作为制备In(OH)3纳米晶体介质,采用低温水热法成功制备了不同形貌和尺寸的In(OH)3为纳材料。利用扫描电镜(SEM)、透射电镜(TEM)、X-射线衍射(XRD)、傅立叶红外光谱仪(FT-IR)和拉曼光谱仪(Raman)等手段分别对材料的形貌、结构和物相等进行了表征与分析。实验结果表明,通过本研究方法,在己二酸水体系中可以得到较均一的尺寸在300-400 nm范围的In(OH)3球形粒子,而在癸二酸水体系中则得到棒状和片状混杂的In(OH)3纳米颗粒。样品在450°C条件下焙烧4 h后,可获得相应的具有良好形貌继承性的In2O3微纳材料。     

Quantum Dot-Catalyzed Photoreductive Removal of Sulfonyl-Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl-protected phenols. For a series of aryl sulfonates with electron-withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD-binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

Structural Peculiarities and Thermoelectric Study of Iron Indium Thiospinel

The homogeneity range of ternary iron indium thiospinel at 873 K was investigated. A detailed study was focused on two distinct series (y=z): 1) a previously reported charge-balanced (In_0.67+0.33y□_0.33−0.33y)_tetr[In_2−zFe_z]_octS₄ (A1-series; □ stands for vacancy; the abbreviations “tetr” and “oct” indicate atoms occupying tetrahedral 8a and octahedral 16d sites, respectively) and 2) a new charge-unbalanced (In_0.67+y□_0.33−y)_tetr[In_2−zFe_z]_octS₄ (A2-series). Fe atoms were confirmed to exclusively occupy an octahedral position in both series. An unusual reduction of the unit cell parameter with increasing Fe content is explained by differences in the ionic radii between Fe and In, as well as by an additional electrostatic attraction originating from charge imbalance (latter only in A2-series). The studied compound is an n-type semiconductor, and its charge carrier concentration increases or decreases for larger Fe content within the A1- and A2-series, respectively. The thermal conductivity κ_tot is significantly reduced upon increasing vacancy concentration, whereas the change of power factor is insufficient to drastically improve the thermoelectric figure of merit.     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.