基于正电荷和光热协同效应的新型半导体聚合物纳米抗菌材料

由于抗生素的不当使用和细菌多药耐药的出现, 迫切需要开发新的抗菌剂. 本文制备了具有光热转换性能的正电荷半导体高分子材料及具有协同抗菌活性的半导体聚合物纳米粒子(SP-PPh₃ NPs). SP-PPh₃ NPs的光热转化效率为43.8%. 带正电荷的SP-PPh₃ NPs可以附着在细菌上, 有助于将热量有效传递给细菌. 在热和正电荷的协同作用下, SP-PPh₃ NPs对革兰氏阴性大肠杆菌(E. coli)和革兰氏阳性金黄色葡萄球菌(S. aureus)均具有抗菌活性, 其对二者的体外抑菌率分别为99.9%和98.6%. 此外, SP-PPh₃ NPs具有良好的生物相容性, 对小鼠的主要器官几乎无副作用. 对细菌感染的小鼠皮肤伤口用SP-PPh₃ NPs治疗12 d后, 伤口可以很好地愈合.     

Structural Peculiarities and Thermoelectric Study of Iron Indium Thiospinel

The homogeneity range of ternary iron indium thiospinel at 873 K was investigated. A detailed study was focused on two distinct series (y=z): 1) a previously reported charge-balanced (In_0.67+0.33y□_0.33−0.33y)_tetr[In_2−zFe_z]_octS₄ (A1-series; □ stands for vacancy; the abbreviations “tetr” and “oct” indicate atoms occupying tetrahedral 8a and octahedral 16d sites, respectively) and 2) a new charge-unbalanced (In_0.67+y□_0.33−y)_tetr[In_2−zFe_z]_octS₄ (A2-series). Fe atoms were confirmed to exclusively occupy an octahedral position in both series. An unusual reduction of the unit cell parameter with increasing Fe content is explained by differences in the ionic radii between Fe and In, as well as by an additional electrostatic attraction originating from charge imbalance (latter only in A2-series). The studied compound is an n-type semiconductor, and its charge carrier concentration increases or decreases for larger Fe content within the A1- and A2-series, respectively. The thermal conductivity κ_tot is significantly reduced upon increasing vacancy concentration, whereas the change of power factor is insufficient to drastically improve the thermoelectric figure of merit.     

中空核壳结构Ni1.2Co0.8P@N-C钠离子电池负极材料的制备及拉曼研究

本文设计制备了一种新型的氮掺杂碳包覆镍钴双金属磷化物中空核壳结构纳米立方体(Ni_1.2Co_0.8P@N-C)作为钠离子电池负极材料. 该材料以镍钴类普鲁士蓝(PBA)纳米粒子为模板,先后经水热法、磷化法和高温碳化处理后合成. 将其作为活性材料应用在钠离子电池中,该材料展现出优异的循环稳定性,当以100 mA·g^-1的电流密度循环至200圈时,该材料的库仑效率保持在99.3%. 进一步通过对不同电位下Ni_1.2Co_0.8P@N-C材料中的氮掺杂碳进行原位拉曼光谱测试,结果显示钠离子在氮掺杂的碳壳中的脱嵌行为具有较大程度的可逆性,研究结果对钠离子电池充放电过程的后续电化学研究提供了有价值的信息.     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

Liquid-Liquid Extraction of Indium(III) from the HCl Medium by Ionic Liquid A327H+Cl− and Its Use in a Supported Liquid Membrane System

Ionic liquid A327H⁺Cl⁻ was generated by reaction of tertiary amine A327 and HCl, and the liquid-liquid extraction of indium(III) from the HCl medium by this ionic liquid dissolved in Solvesso 100 was investigated. The extraction reaction is exothermic. The numerical analysis of indium distribution data suggests the formation of A327H⁺InCl₄⁻ in the organic phase. The results derived from indium(III) extraction have been implemented in a supported liquid membrane system. The influence of the stirring speed (600–1200 min⁻¹), carrier concentration (2.5–20% v/v) in the membrane phase, and indium concentration (0.01–0.2 g/L) in the feed phase on metal transport have been investigated.     

An Indium‐Seamed Hexameric Metal–Organic Cage as an Example of a Hexameric Pyrogallol[4]arene Capsule Conjoined Exclusively by Trivalent Metal Ions

A hexameric metal–organic nanocapsule is assembled from pyrogallol[4]arene units, which are stitched together with indium ions. This indium‐seamed capsule is the first instance of a M₂₄L₆ type hexameric coordination cage held together exclusively by trivalent metal ions. Explicitly, unlike previously reported pyrogallol[4]arene‐based metal‐seamed capsules, the current In³⁺ seamed capsule is entirely supported by O→In coordinate bonds. This work demonstrates the important proof of concept of the ability of pyrogallol[4]arene to react with metals in higher oxidation states to assemble into atomically‐precise hexameric coordination cages. As such, these results open up exciting avenues toward the assembly of previously unanticipated metal–organic capsules, for example offering inspiration for tackling metals exhibiting high valence states such as in the lanthanide and actinide series.     

Atomic Layer Deposition of Cobalt Phosphide for Efficient Water Splitting

Transition‐metal phosphides (TMP) prepared by atomic layer deposition (ALD) are reported for the first time. Ultrathin Co‐P films were deposited by using PH₃ plasma as the phosphorus source and an extra H₂ plasma step to remove excess P in the growing films. The optimized ALD process proceeded by self‐limited layer‐by‐layer growth, and the deposited Co‐P films were highly pure and smooth. The Co‐P films deposited via ALD exhibited better electrochemical and photoelectrochemical hydrogen evolution reaction (HER) activities than similar Co‐P films prepared by the traditional post‐phosphorization method. Moreover, the deposition of ultrathin Co‐P films on periodic trenches was demonstrated, which highlights the broad and promising potential application of this ALD process for a conformal coating of TMP films on complex three‐dimensional (3D) architectures.     

Quantum Dot‐Catalyzed Photoreductive Removal of Sulfonyl‐Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl‐protected phenols. For a series of aryl sulfonates with electron‐withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD‐binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

铟封前后透射式GaAs光电阴极光谱响应特性的测试与分析

利用自行研制的光谱响应测试仪工程化样机,对透射式GaAs光电阴极在高温激活结束、低温激活结束以及铟封成管后的光谱响应特性进行了测试。结果显示,铟封后阴极整个响应波段的光谱响应下降,长波响应受到最显著的影响,表现为800~815 nm之间长波响应大幅度衰减,截止波长和峰值波长向短波移动,峰值响应和积分灵敏度减小,最终的光谱响应曲线变得平坦。阴极参量的计算结果反映铟封后阴极的表面逸出几率降低,说明铟封引起阴极表面激活层发生变化,使得能量较低的长波段光生电子不容易逸出,阴极长波响应和灵敏度随之降低。进一步分析了铟封过程中影响阴极表面激活层的因素。     

氧化镓纳米材料的制备及其在光电探测方面的应用研究进展

近年来,半导体的纳米材料凭借其奇特的介观物理特性,成为当前研究的热点,特别是纳米金属氧化物。氧化镓纳米材料具备优异的光电、气敏、耐压且低损耗等特性,为材料学、电子学和化学等多个研究领域带来了新的机遇。本文概述了氧化镓纳米结构的制备方法,并展望了其在光电探测方面的应用。