A facile fabrication of MOF for selective removal of chromium (III) from aqueous solution

A simple method for fabricating a metal organic framework (MOF: HKUST-1) as sorbent for selective removal of chromium (III) from aqueous solution is discussed. The structure and morphology of HKUST-1 was identified by fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), the powder X-ray diffraction (XRD) and N₂ adsorption-desorption (BET) analysis. Its removal process of chromium (III) and chromium (VI) on HKUST-1 was assessed systematically under various conditions such as pH value, shaking time and initial concentration of chromium (III). At pH 6.0–8.0, HKUST-1 were selective towards chromium (III) but hardly chromium (VI). Kinetic parameters fitted well with pseudo-second-order model and adsorption progress was described by Langmuir isotherm equations and spontaneous and endothermic according to the results of thermodynamics studies (?G?<?0, ?H?>?0, ?S?>?0).     

Synthesis and Characterization of Antimony(III) Complexes of Thioamides,and Crystal Structure of {[Sb(Imt)2Cl2]2((2‐Imt)}Cl2(Imt=Imidazolidine‐2‐thione)

Antimony(III) complexes of thioamides [thioamides=thiourea (Tu), N,N′‐dimethylthiourea (Dmtu), tetramethylthiourea (Tmtu), imidazolidine‐2‐thione (Imt) and diazinane‐2‐thione (Diaz)] with the general formulae, Sb(thione)_nCl₃ (n=1, 2, 2.5, 3) were prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C) spectroscopic methods. The spectral data of the complexes are consistent with the coordination of the thiones to antimony(III). The crystal structure of one of them, {[Sb(Imt)₂Cl₂]₂(μ₂‐Imt)}Cl₂ ( 1 ), was determined by X‐ray crystallography, which shows that the complex is dinuclear consisting of two [Sb(Imt)₂Cl₂] units bridged by an Imt molecule. In 1 , the antimony atom is bonded to two chlorine atoms, two sulfur atoms of coordinated Imt molecules and one sulfur atom of a bridging Imt molecule. The antimony environment can be considered to be distorted octahedral with one Cl^? ion weakly bound to antimony.     

Chromium(III)-Ettringite Formation and its Thermal Stability

Attempts have been made to replace aluminium(III) by chromium(III) in the ettringite structure because of practical importance of a waste treatment technology. The optimum conditions of Ca₆[Cr(OH)₆]₂(SO₄)₃⋅26H₂O formation and its thermal stability are reported. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis,crystal structure,and interaction with DNA and BSA of a chromium(III) complex with naph-gly Schiff base and 1,10-phenanthroline

A new chromium(III) complex, [CrCl(naph-gly)phen]?H₂O (naph-gly = Schiff base derived from 2-hydroxy-1-naphthaldehyde and glycine, phen = 1,10-phenanthroline), has been synthesized and characterized by elemental analysis, electrospray ionization mass spectroscopy, FT-IR, and X-ray single-crystal diffraction. The chromium(III) complex belongs to the trigonal crystal system, P3(1) space group with crystallographic data: a = b = 1.97017(16) nm, c = 1.02991(7) nm, α?=?β?=?90°, γ =120°, V = 3.4621(5) nm³, D_c = 1.476 g?cm^?3, Z = 6, F(0 0 0)?=?1578, R₁ = 0.0508, wR₂ = 0.0907. There are two independent molecules in the crystallographic asymmetric unit of the chromium(III) complex. Each Cr^III is six-coordinate to form an octahedral geometry. In the crystal, a 3-D structure is formed through intermolecular hydrogen bonds. The calf thymus DNA (CT-DNA)- and bovine serum albumin (BSA)-binding properties of the complex have been studied by UV absorption, fluorescence, and circular dichroism (CD) spectroscopy. Results indicate that the chromium(III) complex binds to CT-DNA in an intercalative mode, and it can bind to BSA and cause conformational changes of BSA.     

The formation of a neutral manganese(III) complex containing a tetradentate Schiff base and a ketone – synthesis and characterization

2-Benzoylphenolato-(2,2′-((2,2-dimethylpropane-1,3-diyl)bis((nitrilo)(phenylmethylidyne)))-diphenolato-manganese(III) methanol solvate, [Mn(C₃₁H₂₈N₂O₂)(C₁₃H₉O₂)]·CH₃OH (1), was synthesized and characterized by FTIR, UV–vis, TG-FTIR, TG/DSC, molar conductivity, magnetic moment measurement, and quantum chemical calculations. During the synthesis, partial hydrolysis of ligand is observed. The compound was obtained as amorphous, dark-brown powder. The effects of organic solvents of various polarities on the UV–vis spectra of ligands and complex were investigated. In addition, the IR and UV–vis spectra were also calculated and compared with the experimental data. A single crystal for analysis was obtained by dissolving the amorphous complex in methanol, and slow evaporation of solvent at 4 °C. Single-crystal X-ray analysis indicated that the methanol molecules are not incorporated into the crystal lattice after the recrystallization process ([Mn(C₃₁H₂₈N₂O₂)(C₁₃H₉O₂)] (2)). In the structure Mn(III) is surrounded by two nitrogens and four oxygens of deprotonated Schiff base and α-hydroxy ketone ligands, and adopts a distorted octahedral geometry.     

Studies on ruthenium(III) chalcone thiosemicarbazone complexes as catalysts for carbon–carbon coupling

New six-coordinate ruthenium(III) complexes [RuX(EPh₃)₂(L)] (X = Cl or Br; E = P or As; L = chalcone thiosemicarbazone) have been prepared by reacting [RuX₃(EPh₃)₃] (X = Cl or Br; E = P or As) with chalcone thiosemicarbazones in benzene under reflux. The new complexes have been characterized by analytical and spectroscopic (IR, electronic, mass, and EPR) data. The redox behavior of the complexes has also been studied. Based on the above data, an octahedral structure has been assigned for all the complexes. The new complexes exhibit catalytic activity for carbon–carbon coupling reactions.     

Synthesis,crystal structure,and characterization of [Nd(tcph)(Htcph)(H2O)5]

A lanthanide complex [Nd(tcph)(Htcph)(H₂O)₅] (1) (H₂tcph?=?tetrachlorophthalic acid) has been characterized by X-ray single crystal diffraction, elemental analysis, IR, UV-Vis and fluorescence spectra. In the title complex, Nd³⁺ is coordinated by two tetrachlorophthalic acid ligands in a bidentate chelated pattern. Furthermore, the complex contains infinite chains linked by hydrogen bonds.     

A dual chemosensor for Cu2+ and Fe3+ based on π-extend tetrathiafulvalene derivative

A new dual chemosensor (TTF-PBA) for Fe³⁺ and Cu²⁺ in different signal pathways was designed and synthesized. The absorption spectrum, fluorescence spectrum and cyclic voltammograms changed in the presence of Cu²⁺ and Fe³⁺. The optical color changed within 5 s from yellow to orange upon the addition of Cu²⁺, and it changed to dark yellow when Fe³⁺ existed. The cyclic voltammogram of Cu²⁺/TTF-PBA changed from E_ox = 0.50 V, E_red = 0.32 V to E_ox = 0.64 V, E_red = 0.80 V (vs Ag/AgCl) upon the addition of 2.0 equiv. Cu²⁺. As for Fe³⁺/TTF-PBA, its oxidation wave disappeared, and its reduction wave appeared at E_red = ?0.59 V (vs Ag/AgCl) upon the addition of 4.0 equv. Fe³⁺. The sensor displayed high selectivity for Cu²⁺ and Fe³⁺ over other ions including Pb²⁺, Zn²⁺, Ni²⁺, Ag⁺, Cr³⁺, Mn²⁺, Al³⁺, Co²⁺, Pd²⁺, Hg²⁺, Fe^2+, Cd²⁺, Ce³⁺, Bi³⁺ and Au³⁺, the detection limits for Cu²⁺ and Fe³⁺ ion reached as low as 5.33 × 10^?7 mol/L and 5.34 × 10^?7 mol/L, respectively. Furthermore, when Fe³⁺ existed, Cu²⁺ can be detected sequentially by the sensor through the absorption spectrum and the color change observed by naked-eyes.     

Simultaneous separation and determination of Cu(II), Fe(III), and Pb(II) by reversed-phase ion-pair chromatography withN,N,N′, N′-ethylene-diaminetetrakis(methylenephosphonic Acid)

Summary A reversed-phase ion-pair chromatographic (RPIPC) method withN,N,N′, N′-ethylenediaminetetrakis(methylenephosphonic acid) (EDTMP) as coordinating agent has been developed for simultaneous separation and detection of Cu(II), Fe(III), and Pb(II) ions. Response is linearly dependent on amount of sample over the range 9.52–50.8 μg mL⁻¹ for Cu(II), 8.31–41.8 μg mL⁻¹ for Fe(III), and 37.3–51.8 μg mL⁻¹ for Pb(II). The method has been applied successfully to an artificial mixed-ore sample.