Excimer-laser-induced electric conductivity in thin-film C60

The electrical conductivity of thin-film C₆₀ has been changed by more than seven orders of magnitude with KrF (248nm) excimer-laser irradiation. Specific conductivities of 1 ^–1 · cm^–1 have been obtained. The onset of conductivity is consistent with a laser-induced metal-insulator phase transition. The threshold for KrF-laser ablation of C₆₀ has been determined to be 20±2 mJ/cm². This laser-induced process generates an all-carbon semiconductor-metallic junction which may have important technological applications.     

Charge carrier injection and transport in polymer blend films

The steady current-voltage characteristics of single layer organic devices based on MEH-PPV and N,N′-diphenyl-N,N′-bis(4′-[N,N-bis(naphth-1-yl)-amino]-biphenyl-4-yl)-benzidine (TPTE) blend with different TPTE concentrations was investigated. The thickness dependence of the current-voltage relationship clearly demonstrates that the current at low voltage and at high voltage are all space charge limited. The current density-electric field characteristic proves the blend polymer LEDs to operate in the tunneling-controlled model. The effective hole mobility is directly determined by space charge limited current at high voltage and increases with increasing TPTE content in the blend. The EL efficiency shows concentration dependence, which is attributed to the change of the transport of holes in the blend film.     

Luminescence mechanisms of green and blue organic light-emitting devices utilizing hole-blocking layers

Optical and electrical measurements on green and blue organic light-emitting devices (OLEDs) with and without hole-blocking layers (HBLs) were performed, and the luminescence mechanisms of green and blue OLEDs utilizing HBLs were investigated by using energy band diagrams and carrier density distributions. The dependence of the electroluminescence efficiencies on the existence of HBLs was described on the basis of a luminescence mechanism. The density distributions of the electrons and the holes in OLEDs under applied electric fields were estimated from the energy band diagrams, taking into account the electronic parameters and the layer thicknesses. The luminescence efficiencies and the color chromaticities were significantly affected by the existence of the HBLs. These analyses can help improve understanding of the luminescence mechanisms at play in and the electroluminescence efficiencies of green and blue OLEDs with HBLs, and the present results provide important information on the optical properties for enhancing the efficiencies of OLEDs operating in the green and the blue regions of the spectra.     

Optical absorption in compact and extended dendrimers

Dendrimers are highly branched molecules, which are expected to be useful, for example, as efficient artificial light harvesting systems, in nano-technological or in medical applications. There are two different classes of dendrimers: compact dendrimers with constant distance between neighboring branching points throughout the macromolecule and extended dendrimers, where this distance increases from the system periphery to the center. We investigate the linear optical absorption spectra of these dendrimer types using the Frenkel exciton concept. The electron-phonon interaction is taken into account by introducing a heat bath that interacts with the exciton in a stochastic manner. We discuss compact dendrimers with equal excitation energies at all molecules, dendrimers with a functionalized core as well as with a whole branch functionalized. Furthermore the line shape of a compact dendrimer is discussed when neighboring molecules at the periphery interact and when all molecules have randomly distributed excitation energies due to disorder. Finally, we discuss two models for extended dendrimers.     

Improved Blue-Green Electrophosphorescence from a Tuning Iridium Complex with Benzyl Group in Polymer Light-Emitting Devices

Electroluminescence performances from a tuning biscyclometlated iridium complex with benzyl group are demonstrated in double-layered polymer light-emitting devices （PLEDs） using a blend of poly（9,9-dioctylfluorene） and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole as a host matrix. Blue-green electrophosphorescent emission with a peak at 521 nm and a shoulder at 492nm was observed. The highest luminance efficiency of 4.8cd/A at current density of 0. 56 mA/cm^2 and a maximum luminance of 1944 cd/m^2 at 217.6 mA/cm^2 were achieved in the devices at the dopant concentration of 8%. The luminous performance of the devices becomes better with increasing dopant concentrations from 1% to 8%. This implies that the concentration quenching of this iridium complex with benzyl group can be efficiently inhibited in the devices.     

Dynamic studies on laser-induced gratings in azobenzene-doped polymer film

Studies on the dynamic behaviours of laser-induced gratings through two-photon absorption and single-photon absorption were carried out in an azobenzene-doped PMMA film. The experimental results exposed the structures of energy levels and the relaxation between them, in which different lifetimes of the triplet states of trans and cis isomers of azobenzene molecule were recognized. The temporal characteristics of the diffracted signal from the induced-gratings showed also the dynamic processes of the photoisomerization reaction between two isomers.     

All-Optical Switching Based on Azo Polymer Material

Conventional all-optical switches based on azo polymer films and the all-optical switches based on the attenuated total reflection （ATR） geometry are investigated. A conventional switch system, including a pump beam of 532 nm and a probe beam of 650 nm, is based on the photoinduced birefringence effect of azo polymer. An ATR switch in a prism-multilayer configuration is achieved by changing the reflectance of the probe beam with an external pump beam. The ATR method provides the substantial improvement of the speed and the efficiency of the modulation over the conventional method. Although the azo polymer response still remains relatively slow, an enhanced nonlinear refractive index of the azo polymer film can effectively increase the modulation.     

Enhanced Electroluminescent Efficiency Based on Functionalized Europium Complexes in Polymer Light-Emitting Diodes

Efficient red polymer light-emitting diodes are fabricated with the single active layer from the blends of poly（N- vinylcarbazole） （PVK） in the presence of 30 wt. % electron-transporting compound 2-（4-biphenylyl）-5-（ptert- butylphenyl）-1,3,4-oxadiazole （PBD） and europium complexes. The polyphenylene functionalized europium com- plex shows an enhanced electroluminescent efficiency due to the large site-isolation effect. For the polyphenylene functionalized europium complex, the maximum external quantum efficiency of 1.90% and luminous efficiency of 2.01 cd A^-1 are achieved with emission peak at 612nm. The maximum brightness is more than 300cd m^-2.     

Enhanced Green Electrophosphorescence from Oxadiazole-Functionalized Iridium Complex-Doped Devices Using Poly（9,9-Dioctylfluorene） Instead of Poly（N-Vinylcarbazole） as a Host Matrix

Optoelectronic properties of the oxadiazole-functionalized iridium complex-doped polymer light-emitting devices （PLEDs） are demonstrated with two different polymeric host matrices at the dopant concentrations 1-8%. The devices using a blend of poly（9,9-dioctylttuorene）（PFO） and 2-（4-biphenyl）-5-（4-tert-butylphenyl）-1,3,4-oxadiazole （PBD） as a host matrix exhibited a maximum luminance efficiency of 11.3 cd/A at 17. 6 mA/cm^2. In contrast, the devices using a blend of poly（N-vinylcarbazole） （PVK） and PBD as a host matrix reveal only a peak luminance efficiency of 6.Scd/A at 4.1 mA/cm^2. The significantly enhanced electrophosphorescent emissions are observed in the devices with the PFO-PBD blend as a host matrix. This indicates that choice of polymers in the host matrices is crucial to achieve highly efficient phosphorescent dye-doped PLEDs.     

Development of porous metal oxide thin films by co-evaporation

This paper focuses on the development of mixed metal oxide thin films and physical characterization of the films. The films were produced by co-evaporation of titanium oxide and tungsten oxide powders. This allowed the development of titanium oxide-tungsten oxide films as analyzed using XPS. Examination in the SEM and AFM showed that the films were nanoporous with the pore size and pore orientation varying as a function of the deposition angle. UV-vis spectra of the films show an increase of transmittance with increasing deposition angle which is attributed to the structure and porosity of the films. Raman analysis indicated that the as-deposited films have broad and weak Raman characteristics, attributed to the nanocrystal nature of the films and the presence of defects, and the peak broadening deceases after annealing the film, as expected.