裂解气相色谱-质谱法分析裂解气压缩机垢样的组成

采用裂解气相色谱-质谱联用技术对大庆石化公司裂解气压缩机EC301不同压缩段的垢样进行分析。实验使用了RJ-1型管炉式裂解器,在500℃下对垢样进行裂解,色谱柱为60 m DB-1型毛细管色谱柱,质谱采用电子轰击电离源,电离能70 eV。研究表明,垢样的形成与环戊二烯密切相关。裂解气相色谱-质谱法可以作为分析该垢样成因的有效手段。     

Profiling fatty acids in vegetable oils by reactive pyrolysis-gas chromatography with dimethyl carbonate and titanium silicate

A novel methodology in on-line pyrolysis-gas chromatography (Py-GC) for the fast analysis of fatty acids in vegetable oils with minimal sample treatment and the use of non-toxic reagents is described. Pyrolysis at 500 degrees C for 10 s of sub-microgram quantity of vegetable oil dissolved in dimethyl carbonate (DMC) and in the presence of nanopowder titanium silicon oxide resulted in the production of fatty acid methyl esters (FAMEs) as unique products. Pyrolysis performed by means of a resistively heated filament pyrolyser interfaced to a GC-MS apparatus enabled the direct analysis of evolved FAMEs. The DMC/Py-GC-MS analysis was tested on soybean, coconut, linseed, walnut and olive oil and the results compared to the classical BF(3)-methanol as reference methodology. The DMC method exhibited a lower precision and was biased towards lower levels of polyunsaturated fatty acids (PUFA) in comparison to the BF(3)-methanol method, but was more advantageous in terms of reduced sample treatment, waste generation and risk factors of employed chemicals.     

FTIR及Py-GC/MS定性分析高聚物单体

红外光谱反应出的是特征化学基团的振动 ,对于高聚物的具体单体组成分析 ,只能借助于紫外光谱、核磁共振及质谱进行综合判断才能得到圆满的鉴定结果[1,2 ] 。本工作针对在红外光谱仪不能分辨的情况下通过气相色谱 质谱联用技术进行综合分析鉴定 ,结果可为其它高聚物分析研究提供实验依据。1　实验1 1　仪器及试验条件未知高聚物试样为白色颗粒状 (晨光化工二厂 )。ＳＹＳＴＥＭ2 0 0 0ＦＴＩＲ ,ＰＥ公司造ＩＲ谱仪 ;ＣＤＳ2 0 0 0铂金丝裂解器 ,裂解室温度 2 5 0℃ ,裂解温度 6 0 0℃ ,升温速率 1 40℃ ｍｓ;ＨＰ6 890型 ,Ｃｏｍｐｏｎｄ…     

Time-, wavelength-, and polarization-resolved measurements of OH (A 2Σ+ ) picosecond laser-induced fluorescence in atmospheric- pressure flames

Laser-induced fluorescence of OH (A ²Σ⁺, v’=1) was measured in hydrogen/oxygen and hydrogen/air/nitrogen flames using laser pulses of 80 psec duration. A 2D signal acquisition scheme simultaneously employed wavelength, temporal, and polarization resolution. The signals emitted in different rotational branches exhibit polarization-dependent intensities, depending on the rotational branch of the absorption line used. It is possible to select experimental conditions such that rotational and vibrational relaxation as well as electronic quenching can be monitored simultaneously. Advantages and limitations of the experimental approach are discussed. Numerical simulations are presented of the LIF spectra affected by energy transfer. Received: 29 March 1999 / Revised version: 14 June 1999 / Published online: 27 October 1999     

Laser-induced fluorescence of seeded nitric oxide as a flame thermometer

Received: 10 June 1997/Revised version: 25 November 1997     

Detection of NO in a spark-ignition research engine using degenerate four-wave mixing

We report the first application of degenerate four-wave mixing (DFWM) to combustion diagnostics in a methane-fuelled internal combustion research engine. Combustion-generated NO in the spark-ignited engine was detected using scanning narrowband DFWM in a modified forward folded BOXCARS geometry. The resulting spectra of the X²Π-A²Σ⁺(0,0) band at 226 nm display an excellent signal-to-noise ratio. Extension of the technique to different engine operating conditions and to time-resolved multiplex DFWM is discussed. Received: 3 May 2001 / Revised version: 1 October 2001 / Published online: 29 November 2001     

The application of CARS for temperature measurements in high pressure combustion systems

The determination of accurate temperatures from CARS N₂ Q-branch spectra in premixed flames is discussed for pressures up to 40 bar. The influence of collisional line narrowing in the CARS spectra is modelled by a MEG fitting law. It takes into account collisions of N₂ with CO₂ and H₂O. The analysis of the CARS data showed that the non-resonant background has an increasing influence on temperature with increasing pressure. Little influence on the quality of the fit between theory and experiment was found. Since there is a danger of residual systematic temperature deviations, which cannot be identified from the quality of the fit, spontaneous rotational Raman scattering is employed as an independent measuring technique.     

Supersonic velocimetry in a shock tube using laser enhanced ionisation and planar laser induced fluorescence

 A novel flow-tagging technique is presented which was employed to measure gas velocities in the free stream of a shock tube. This method is based on the laser spectroscopic techniques of Laser-Enhanced Ionisation (LEI) and Laser-Induced Fluorescence (LIF). The flow in the shock tube is seeded with small amounts of sodium, and LEI is used to produce a substantial depletion of neutral sodium atom concentration in a well-defined region of the flow, by using two wavelength-resonance excitation and subsequent collisional ionisation. At a specific time delay, single-laser-pulse planar LIF is utilised to produce a two-dimensional (2-D) inverse image of the depleted tagged region downstream of the flow. By measuring the displacement of the tagged region, free stream velocities in a shock tube were determined. Large variations in the concentration of sodium seeded into the flow were observed and even in the presence of these large variations accurate free-stream velocity measurements were obtained. The experimentally determined value for velocity compares very well with the predicted velocity. Received: 25 March 1996/Revised version: 8 July 1996