集值优化问题强有效解的Kuhn Tucker最优性条件

在局部凸空间中考虑集值优化问题（VP）在强有效解意义下的Kuhn-Tucker最优性条件．在近似锥．次类凸假设下利用择一性定理得到了（VP）取得强有效解的必要条件，利用基泛函的性质给出了（VP）取得强有效解的充分条件，最后给出了一种与（VP）等价的无约束规划。     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

HL-2Aƫ�����ṹ���켰�ȸ��ɷ���

根据HL-2A装置改造的初步方案,选择优化的偏滤器位形所决定的参数,设计出可采取的偏滤器结构及水冷方式。外靶板和拱顶板上采用双剪切连接件和环向水路具有极向水流的冷却方式。通过ANSYS编码对靶板的热负荷进行分析,结果表明这样的冷却方式在降低流速要求的条件下可以提高靶板表面承载能力。     

Electrochemical impedance spectroscopy and linear polarization applied to evaluation of porosity of phosphate conversion coatings on electrogalvanized steels

In this work, electrochemical impedance spectroscopy and linear polarization are used in determining porosity of zinc phosphates, and of nickel and manganese modified zinc phosphates on electrogalvanized steel. The porosity of the phosphate layers ranges from 0.1% for the manganese-modified hopeite to 8% for hopeite, using the linear polarization and the electrochemical impedance spectroscopy techniques. The porosity values measured using the two techniques were in agreement. All impedance spectra of coated samples showed two steps, with two capacitive arcs and an inductive looping.     

�Թ�ŵ��������߻�����ż����C2��

在常温常压下采用新型旋转电极等离子体反应器，对辉光等离子体作用下的甲烷偶联反应制C2烃进行了研究。结果表明，甲烷偶联反应的主要产物为C2H2，占C2烃的80%以上，能量效率在5.6%～11.2%之间；增加H2含量可以提高CH4转化率和C2烃收率；在500～2200kJ•mol−1的能量密度范围内，CH4转化率随能量密度的增大而线性增加，C2烃收率随着能量密度的增加呈峰形变化趋势。     

输入输出共轴的三弯曲型TM01-TE11模式转换器

 通过采用相位重匹配技术，设计了一种输入输出共轴的三弯曲型TM₀₁-TE₁₁模式转换器，该转换器由三段常曲率弯曲波导和两段直波导组成。用模式耦合理论建立了该类模式转换器的数值计算和优化设计方法，并设计了一个中心频率为7.0 GHz的模式转换器。该转换器的TM₀₁-TE₁₁转换效率在中心频率上大于99％，在6.5~7.5 GHz的频率范围内大于90％。应用时域有限差分法和有限元方法对所设计的模式转换器进行了仿真，仿真结果验证了设计理论和设计结果。     

WLY100型顺序扫描ICP光谱仪设计方案的一些考虑

本文对国产ＷＬＹ１００型顺序扫描ＩＣＰ光谱仪在设计中对单色仪，高频发生器，扫描机构，测光系统，短紫外光域的测量，恒温，气流控制与软件编制等方案的选择作了详尽的阐述，稳妥的方案使研制工作顺利进行，保证整机一次成功。     

高俘获效率电子辐照加速器的设计研究

加速管是一台加速器的核心部分. 一般电子辐照加速器的俘获效率在50%左右, 一半的电子都损失在加速管内. 丢失的电子打在加速管内壁, 产生轫致辐射、腔体发热量增加、真空变坏等许多负面影响. 采用一段等梯度加速结构, 相速沿加速管呈线形增加,调整相速变化规律及加速管腔体的尺寸参数, 设计出的加速管最终的俘获效率提高到90%以上, 同时平均加速梯度没有因此降低, 加速管总长度没有增加.     

Amorphous Fe–Mg alloy thin films: magnetic properties and atomic vibrational dynamics

Amorphous (a-) Fe _x Mg_1?x alloys are interesting materials for the investigation of non-Debye-like low-energy vibrational excitations. We have prepared a-Fe _x Mg_1?x alloy thin films (0.3 ≤ × ≤0.7) by vapour quenching. The amorphous state was confirmed by conversion electron Mössbauer spectroscopy between 4.2–300 K, and the x- and temperature-dependence of the isomer shift and hyperfine magnetic field was measured. For x= 0.6 and 0.7, magnetic ordering occurs below ~150 K. The atomic vibrational density of states, g(E), was determined by nuclear resonant inelastic scattering, providing clear evidence for the non-Debye-like low-energy vibrational excitations.