Glass transition line for the system of charged hard spheres

We locate the glass transition line of the charged-hard-sphere system in the density-temperature plane, using a mean-field hypernetted chain approximation within the replica-symmetry-breaking scenario [S. Franz and G. Parisi, Phys. Rev. Lett. 79 (1997) 2486. [11]]. Our results demonstrate a dominant role of the steric factor and explain the ineffectiveness of purely Coulombic interactions in driving phase transitions.     

The effect of compositional variations on the glass-transition and crystallisation temperatures in Ge-Se-In glasses

The glass-transition (T_g) and crystallisation (T_x) temperatures of glassy Ge_xSe_yIn₁₂ (7≤x≤28) have been determined from differential scanning calorimetry measurements. The variations of T_g and T_x with composition have been specified. It has been found that T_g reaches a maximum at 614 K for the composition Ge_23.33 Se_64.67 In₁₂ while T_x passes through a minimum at 740 K for the same composition. The values of the cohesive energies of the studied compositions have also been estimated using the chemical bond approach method. It is found that the composition Ge_23.33Se_64.67In₁₂ possesses the maximum cohesive energy. These results are explained in terms of the structure of Ge-Se-In glasses. Received: 12 March 2001 / Accepted: 29 March 2001 / Published online: 23 May 2001     

Some relevant parameters affecting the glass transition of supported ultra-thin polymer films

We have measured, the thickness dependence of the glass transition temperature T(g)( h), using ellipsometry at variable temperature, for poly(methyl-methacrylate) (PMMA) of various tacticity in confined geometry. We report that several factors significantly affect T(g)( h): i) polymer microstructure (stereoregularity of PMMA) related to local dynamics; ii) interfacial interactions; iii) conformation of the polymer chains. These results raise many fundamental questions on the origin of the thickness-dependent glass transition. Why and how do the interactions with the substrate significantly affect T(g)( h)? Does T(g)( h) depend on the modifications of conformational parameters of the chains (their entropy)? What is the correlation between local dynamics and T(g)( h) in thin films? The aim of this paper is to summarise these open questions, which should stimulate further investigations in the thin polymer film scientific community.     

On the theory of light scattering in molecular liquids

The theory of light scattering for a system of linear molecules with anisotropic polarizabilities is considered. As a starting point for our theory, we express the result of a scattering experiment in VV and VH symmetry as dynamic correlation functions of tensorial densities ρ _lm(q) with l = 0 and l = 2. l, m denote indices of spherical harmonics. To account for all observed hydrodynamic singularities, a generalization of the theory of Schilling and Scheidsteger [1] for these correlation functions is presented, which is capable to describe the light scattering experiments from the liquid regime to the glassy state. As a microscopic theory it fulfills all sum rules contrary to previous phenomenological theories. We emphasize the importance of the helicity index m for the microscopic theory by showing, that only the existence of m = 1 components lead to the well known Rytov dip in liquids and to the appearance of transversal sound waves in VH symmetry in the deeply supercooled liquid and the glass. Exact expressions for the phenomenological frequency dependent rotation translation coupling coefficients of previous theories are derived. Received 3 July 2000 and Received in final form 7 November 2000     

Comment on “The properties of free polymer surfaces and their influence on the glass transition temperature of thin polystyrene films” by J.S. Sharp,J.H. Teichroeb and J.A. Forrest

Sharp, Teichroeb and Forrest [J.S. Sharp, J.H. Teichroeb, J.A. Forrest, Eur. Phys. J. E 15, 473 (2004)] recently published a viscoelastic contact mechanics analysis of the embedment of gold nanospheres into a polystyrene (PS) surface. In the present comment, we investigate the viscoelastic response of the surface and conclude that the embedment experiments do not support the hypothesis of a liquid surface layer of sufficiently reduced “rheological temperature” to explain reports of very large reductions in the glass temperature of freely standing ultrathin polystyrene films. We also report some errors and discrepancies in the paper under comment that resulted in an inability to reproduce the reported calculations. We present our findings of error in a spirit of clarifying the problem of embedment of spheres into surfaces and in order that others can understand why they may not reproduce the results reported by Sharp, Teichroeb and Forrest. In the comment, we also examine the effects of the magnitude of the forces that result from the polymer surface-nanosphere particle interactions on the viscoelastic properties deduced from the embedment data and we provide a comparison of apparent surface or “rheological” temperature vs. experimental temperature that indicates further work needs to be performed to fully understand the surface embedment experiments. Finally, we comment that the nanosphere embedment measurements have potential as a powerful tool to determine surface viscoelastic properties.     

Mobility in thin polymer films ranging from local segmental motion, Rouse modes to whole chain motion: A coupling model consideration

Large increases of mobility of local segmental relaxation observed in polymer films as the film thickness is decreased, as evidenced by decreases of the glass temperature, are not found for relaxation mechanisms that have longer length scales including the Rouse relaxation modes and the diffusion of entire polymer chains. We show that the coupling model predictions, when extended to consider polymer thin films, are consistent with a large increase of the mobility of the local segmental motions and the lack of such a change for the Rouse modes and the diffusion of entire polymer chains. There are two effects that can reduce the coupling parameter of the local segmental relaxation in thin films. One is the chain orientation that is induced parallel to the surface when the film thickness h becomes smaller than the end-to-end distance of the chains and the other is a finite-size effect when h is no longer large compared to the cooperative length scale. Extremely thin ( ≈ 1.5 nm) films obtained by intercalating a polymer into layered silicates have thickness significantly less than the cooperative length scale near the bulk polymer glass transition temperature. As a result, the coupling parameter of the local segmental relaxation in such thin films is reduced almost to zero. With this plausible assumption, we show the coupling model can explain quantitatively the large decrease of the local segmental relaxation time found experimentally. Received 1 August 2001 and Received in final form 1 December 2001     

Polymer thin films and surfaces: Possible effects of capillary waves

It is discussed how the proximity of a free surface or mobile interface may affect the strain relaxation behavior in a viscoelastic material, such as a polymer melt. The eigenmodes of a viscoelastic film are thus derived, and applied in an attempt to explain the experimentally observed substantial shift of the glass transition temperature of sufficiently thin polymer films with respect to the bulk. Based on the idea that the polymer freezes due to memory effects in the material, and exploiting results from mode-coupling theory, the experimental findings of several independent groups can be accounted for quantitatively, with the elastic modulus at the glass transition temperature as the only fitting parameter. The model is finally applied discussing the possibility of polymer surface melting. A surface molten layer is predicted to exist, with a thickness diverging as the inverse of the reduced temperature. A simple model of thin polymer film freezing emerges which accounts for all features observed experimentally so far. Received 8 August 2001     

The properties of free polymer surfaces and their influence on the glass transition temperature of thin polystyrene films

We present a detailed study of free polymer surfaces and their effects on the measured glass transition temperature (T_g) of thin polystyrene (PS) films. Direct measurements of the near-surface properties of PS films are made by monitoring the embedding of 10 and 20 nm diameter gold spheres into the surface of spin-cast PS films. At a temperature T = 378K( > T_g), the embedding of the spheres is driven by geometrical considerations arising from the wetting of the gold spheres by the PS. At temperatures below T_g ( 363K < T < 370K), both sets of spheres embed 3-4 nm into the PS films and stop. These studies suggest that a liquid-like surface layer exists in glassy PS films and also provide an estimate for the lower bound of the thickness of this layer of 3-4 nm. This qualitative idea is supported by a series of calculations based upon a previously developed theoretical model for the indentation of nanoscale spheres into linear viscoelastic materials. Comparing data with simulations shows that this surface layer has properties similar to those of a bulk sample of PS having a temperature of 374 K. Ellipsometric measurements of the T_g are also performed on thin spin-cast PS films with thicknesses in the range 8nm < h < 290nm. Measurements are performed on thin PS films that have been capped by thermally evaporating 5 nm thick metal (Au and Al) capping layers on top of the polymer. The measured T_g values (as well as polymer metal interface structure) in such samples depend on the metal used as the capping layer, and cast doubt on the general validity of using evaporative deposition to cover the free surface. We also prepared films that were capped by a new non-evaporative procedure. These films were shown to have a T_g that is the same as that of bulk PS (370±1 K) for all film thicknesses measured (> 7 nm). The subsequent removal of the metal layer from these films was shown to restore a thickness-dependent T_g in these samples that was essentially the same as that observed for uncapped PS films. An estimate of the thickness of the liquid-like surface layer was also extracted from the ellipsometry measurements and was found to be 5±1 nm. The combined ellipsometry and embedding studies provide strong evidence for the existence of a liquid-like surface layer in thin glassy PS films. They show that the presence of the free surface is an important parameter in determining the existence of T_g reductions in thin PS films.     

Effect of physical ageing in thin glassy polymer films

We have studied the effect of physical ageing in thin supported glassy polystyrene films by using ellipsometry to detect overshooting in the expansivity-temperature curve upon heating of aged samples. Films with thickness 10-200 nm have been aged at 70^° C and 80^° C (below the bulk glass transition temperature). We observe clear relaxation peaks in the expansivity-temperature curve for films thicker than 18 nm but not for the 10 nm film. The intensity of the relaxation peak is inversely proportional to the film thickness, while the temperatures characteristic to the relaxation peak are almost independent of the film thickness. These observations are successfully interpreted by the idea that the surface layer of the order of 10 nm has liquid-like thermal properties. Received 28 October 2002 / Published online: 1 April 2003 RID="a" ID="a"Present address: Yokohama Research Center, Mitsubishi Chemical Corporation, 1000 Kamoshida-chou, Aoba-ku, Yokohama 227-8502, Japan; e-mail: kawana@rc.m-kagaku.co.jp     

Overlap properties and adsorption transition of two Hamiltonian paths

We consider a model of two (fully) compact polymer chains, coupled through an attractive interaction. These compact chains are represented by Hamiltonian paths (HP), and the coupling favors the existence of common bonds between the chains. We use a (n=0 component) spin representation for these paths, and we evaluate the resulting partition function within a homogeneous saddle point approximation. For strong coupling (i.e. at low temperature), one finds a phase transition towards a “frozen” phase where one chain is completely adsorbed onto the other. By performing a Legendre transform, we obtain the probability distribution of overlaps. The fraction of common bonds between two HP, i.e. their overlap q, has both lower () and upper () bounds. This means in particular that two HP with overlap greater than coincide. These results may be of interest in (bio)polymers and in optimization problems. Received 4 December 1998 and Received in final form 10 March 1999