AlN：TbF3薄膜的电致发光

用射频磁控反应溅射的方法,以金属Ａｌ和ＴｂＦ３为靶材,在总压为１Ｐａ,Ｎ２／Ａｒ比为２０／８０的气氛下,制备了ＡｌＮ：ＴｂＦ３薄膜。研究了不同制备条件对薄膜光致光相对亮度的影响。进一步实验表明,电致发光的相对亮度具有与光致发光相近的对浓度的依赖关系。在衬底温度为６００℃,ＴｂＦ３含量约为４．０ｍｏｌ％的条件下制备的ＡｌＮ：ＴｂＦ３ＡＣＴＦＥＬ器件,在交流驱动条件下,得到了Ｔｂ＾３＋离子的特征发光。     

Interfacial roughness and angle dependence of giant magnetoresistance in magnetic superlattices

Using the two-point conductivity formula, we numerically evaluate the giant magnetoresistance (GMR) in magnetic superlattices with currents in the plane of the layers (CIP), from which the effect of the interfacial roughness and magnetization configuration on the GMR is studied. With increasing interfacial roughness, the maximal GMR ratio is found to first increase and then decrease, exhibiting a peak at an optimum strength of interfacial roughness. For systems composed of relatively thick layers, the GMR is approximately proportional to ,where is the angle between the magnetizations in two successive ferromagnetic layers, but noticeable departures from this dependence are found when the layers become sufficiently thin. Received 21 September 1998 and Received in final form 22 December 1998     

Magnons localised on surface steps: a theoretical model

We present the solution of the full magnetic problem arising from the absence of magnetic translation symmetry in two dimensions due to an extended magnetic surface step on the surface boundary of an insulating magnetic substrate. The calculation concerns in particular the spin fluctuation dynamics of a magnetic atomic step in the surface of a ferromagnetic simple cubic lattice, the spin order being in the direction normal to surface boundary. Only exchange interactions are considered between the spins in the model. The theoretical approach determines the evanescent spin fluctuation field in the two dimensional plane normal to the direction of the step edge. This field arises owing to the absence of magnetic translation symmetry in this plane, and is completely independent of the form of the surface defect, underlying the general character of the calculation. We show the existence of optical localised magnon modes propagating along the step, their fields being evanescent in the plane normal to the step direction. Received 17 February 1999     

Preliminary results on sol-gel processing of 〈100〉 oriented Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> thin films using diol-based solutions

A novel sol-gel method is used here for the synthesis of air-stable and precipitate-free diol-based sols of 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT). Sols containing a 15 mol% lead excess have been used for the preparation of PMN-PT thin films. The films were deposited onto (111)Pt/TiO₂/SiO₂/(100)Si substrates, and crystallised in oxygen by Rapid Thermal Processing (RTP), using different temperatures and soaking times. Single perovskite films are obtained when treated at temperatures between 600 and 700°C for 6 s. Those crystallised at other temperatures contain a secondary pyrochlore phase. This phase also appears in the films treated at 650°C with soaking times longer than 6 s. PMN-PT films with a 〈100〉 preferred orientation were prepared by using a PbTiO₃ seeding layer onto the substrate. These PMN-PT films present relaxor-type electrical properties. Dielectric permittivity, , shows significant dispersion. Its temperature dependence presents a broad maximum at 110–130°C, which position shifts towards higher temperatures with frequency. Ferroelectric hysteresis loops show high values of saturation polarisation but very low remanence. The piezoelectric activity of the films has been tested by the measurement of their local piezoelectric hysteresis loops.     

Label-free detection of the aptamer binding on protein patterns using Kelvin probe force microscopy (KPFM)

Anti-lysozyme aptamers are found to preferentially bind to the edge of a tightly packed lysozyme pattern. Such edge-binding is due to the better accessibility and flexibility of the edge lysozyme molecules. Kelvin probe force microscopy (KPFM) was used to study the aptamer–lysozyme binding. Our results show that KPFM is capable of detecting the aptamer–protein binding down to the 30 nm scale. The surface potential of the aptamer–lysozyme complex is approximately 12 mV lower than that of the lysozyme. The surface potential images of the aptamer-bound lysozyme patterns have the characteristic shoulder steps around the pattern edge, which is much wider than that of a clean lysozyme pattern. These results demonstrate the potentials of KPFM as a label-free method for the detection of protein–DNA interactions. Figure Aptamers preferentially bind on the edge of a protein pattern as revealed by Kelvin force microscopy.

Inhomogeneous Phase Transition upon Hydrogenation of Nanocluster Pd Films

Phased out: A combination of electrochemical and optical techniques is used to study the interaction of hydrogen with palladium nanoclusters. Hydrogen pressure‐composition isotherms reveal the reduced presence of the β phase in palladium nanoclusters. Hydrogen extraction transients relate the reduced miscibility gap to a core‐shell phase transformation in the palladium nanoclusters (see picture).

     

Matrix-isolation-FTIR spectroscopy with an integrating sphere

The use of an integrating sphere for the measurement of absorption spectra of thin films is described. The thin film (for example a rare gas matrix) is grown directly on the inside surface of the sphere. Multiple reflections inside the integrating sphere lead to significant enhancement of weak absorptions of the film, increasing the sensitivity of such measurements.     

The use of LCMS as an analytical tool for hydrolysis/polycondensation monitoring of a chiral ORMOSIL precursor

The kinetic of the sol–gel hydrolysis and polycondensation reactions of a chiral ORMOSIL precursor was investigated by LCMS technique as a function of water excess and pH. While the amount of water does not significantly change the kinetics, the reactions strongly depend on the [H]⁺ concentration. At pH ≤ 3, the hydrolysis is very fast and the conversion of the precursor is completed within less than 1 h whereas at 80% of the precursor is still present after 50 h at pH = 3.5. This kinetic study allows to define a set of initial conditions and time ranges required to provide good optical quality dip coated films .

IR laser ablative degradation of poly(phenylene ether-sulfone): Deposition of films containing ether, sulfone, sulfoxide and sulfide groups

Pulsed infrared laser-induced ablation of poly(1,4-phenylene ether-sulfone) (PES) results in the extrusion of SO₂, CO and hydrocarbon molecules and allows deposition of dark solid paramagnetic carbonaceous films that were analysed by FTIR, UV, XP, Raman and EPR spectroscopy and by electron microscopy and revealed as poor in S and containing CO, SO₂, -SO- and C-S-C units. The films show pronounced conjugation of sp²-C atoms and their EPR spectra are sensitive function of the presence of molecular oxygen. The laser process differs from the conventional pyrolysis of PES which yields SO₂ and phenol as major volatile products and a carbonaceous char.