Higher Aliphatic Aldehyde Polymers. V. Cyclic Trimers of C9 to C12, Normal Aliphatic Aldehydes

Cyclic trimers of n-nonaldehyde (NA), n-decaldehyde (DA), n-undecaldehyde, (UA) and n-dodecaldehyde (DDA) were prepared by reacting the individual aldehydes with protic or Lewis acids. Higher aliphatic aldehydes whose long paraffinic chains dominate the general properties of these compounds do not trimerize readily the trimers, when formed, are purified with difficulty. The cyclic trimers, characterized by IR and NMR spectroscopy, are exclusively the cis isomers and commonly exist in all equatorial conformations. The melting behavior of the cyclic trimers was studied by DSC. The melting endotherms and the enthalpies of fusion increase with increasing chain length. Although the melting temperatures of the cyclic trimers are similar to the melting range of the side-chain crystallization of the corresponding crystalline isotactic polyaldehydes, the transition peaks of the trimers are single peaks and much sharper than the corresponding polymer peaks.     

Transition metals on the (0 0 0 1) surface of graphite: Fundamental aspects of adsorption,diffusion, and morphology

In this article, we review basic information about the interaction of transition metal atoms with the (0 0 0 1) surface of graphite, especially fundamental phenomena related to growth. Those phenomena involve adatom-surface bonding, diffusion, morphology of metal clusters, interactions with steps and sputter-induced defects, condensation, and desorption. General traits emerge which have not been summarized previously. Some of these features are rather surprising when compared with metal-on-metal adsorption and growth. Opportunities for future work are pointed out.     

Some insights in the sonochemical preparation of cobalt nano-particles

The preparation of cobalt nano-particles from a solution of Co(CO)₃(NO) in n-decane under ultrasonication with a frequency of 20 kHz yielded cobalt particles of a size of ca. 5 nm. The presence of either silica or oleic acid in the solution reduced the particle size to ca. 3 and 2 nm, respectively. The resulting particle size is independent of the ultrasonication time, initial Co(CO)₃(NO) concentration, ultrasound intensity and solution temperature. It is postulated that bubble collapse generates multiple nucleation sites resulting in the formation of cobalt particles with a rather uniform particle size distribution.     

电沉积制备的PtNi纳米粒子用于氧还原反应:成核和生长机理

质子交换膜燃料电池(PEMFCs)电堆中阴极Pt基催化剂的高用量造成其成本居高不下,成为阻碍燃料电池汽车商业化推进的重要原因,因此开发低Pt、高活性的Pt基催化剂势在必行.Pt合金催化剂能够有效地降低Pt用量,并通过对合金颗粒的元素比例、晶面、粒径等实行精确调控,显著提升氧还原(ORR)催化活性.然而,目前常用的制备方法由于原料与制备成本高昂、过程复杂大都难以适应规模化生产需求.电化学方法通过控制施加的电流或电位控制晶体生长.在水体系中该方法已得到验证,但由于Pt化合物的热力学标准电极电位与过渡金属元素之间相差较大,且对于过渡金属来说,电负性大多小于铂,因此还原电位通常负于析氢电位,使得二者难以实现共沉积.有机体系中电位窗口比水体系大得多,Pt与电位较负的过渡金属可实现共沉积,采用小分子有机溶剂也可避免溶剂清洗问题,具有应用潜力.本文提出了一种简单的一步电沉积方法,选择易溶于水的N,N-二甲基甲酰胺(DMF)作为溶剂,将碳载体滴涂到玻碳电极上作为工作电极,通过电化学方法直接将Pt-Ni合金沉积到碳载体上,并利用物化表征与密度泛函理论(DFT)理论计算来探究共沉积机理.透射电镜表征结果表明,在不同的沉积电位下均可得到分散均匀、粒径适当的催化剂;且随着电位值降低,催化剂颗粒分散得更均匀,颗粒粒径不断减小.元素分布和晶面结果表明,铂镍元素均匀分布于颗粒中.所有样品均表现出优异的ORR性能,最高的面积比活性达到商业催化剂的6.85倍.将材料表征、电化学表征与DFT计算结合,建立起了铂镍合金生长过程的模型,并发现了有机体系中独特的成核-生长机理.将体系中的DMF换成超纯水,用同样的方法进行沉积,得到的催化剂颗粒团聚严重,说明DMF的使用能够避免颗粒团聚.在单独铂的体系中沉积发现,负载量极小,表明体系中镍前驱体的添加对于催化剂的沉积过程起到重要作用.电化学表征结果表明,在所选用的DMF有机体系中,镍的还原电位与铂的十分接近,但还原动力学更慢,趋向于先形成吸附原子后快速还原.由此可以推测,在二者合金的形成过程中,镍在碳载体表面的缓慢还原而形成的吸附原子能够成为铂还原的活性位点,从而降低了铂还原成核所需的能量,使得载体上的成核位点大大增加,这与DFT模拟结果一致.DFT建立了碳上镍的位点和铂的位点,分别在上面进行铂的还原,发现镍位点上比铂位点上更容易实现铂沉积.本文提出了铂镍共沉积的机理:在过电位(即还原能量)下,铂的还原动力学较镍稍快,于是铂先还原形成晶核,但难以达到生长的临界半径,于是单独铂体系中的沉积负载量很少.载体上还原的镍为铂还原提供了大量的活性位点,促进了铂还原,并与镍共沉积.Pt-Ni表面则进一步促进了铂的沉积和颗粒的生长.综上,本文提出了一种用于制备铂合金催化剂的有机电沉积体系,实现了单分散的碳载铂镍合金催化剂的一步制备.随后,本文将材料表征、电化学表征与DFT计算相结合,建立起了有机体系中铂镍合金成核-生长过程的机理模型.     

金属锂负极的成核机制与载体修饰

金属锂具有电位低、比容量高等突出优点,是极具吸引力的下一代高能量密度电池的负极材料,然而存在枝晶、死锂、副反应严重、库伦效率低、循环稳定性差等问题,限制了其实际应用。金属锂负极的成核是电化学沉积过程中的重要步骤,锂在集流体或导电载体上的均匀成核和稳定生长对于抑制枝晶死锂、提高充放电效率和循环性能具有关键作用。本文从成核机制与载体效应的角度概述了锂金属负极的研究进展,介绍了锂成核驱动力、异相成核模型、空间电荷模型等内容,分析了锂核尺寸及分布与过电位和电流密度的关系,并通过三维载体分散电流密度、异相晶核/电场诱导成核、晶格匹配等方面的研究实例讨论了载体修饰对锂负极的性能提升。     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

成核剂和促进剂对聚对苯二甲酸乙二酯结晶的影响

研究了一种成核剂和结晶促进剂及其混合物对聚对苯二甲酸乙二酯（ＰＥＴ）结晶过程和熔融行为的影响．结果表明,成核剂的引入降低了ＰＥＴ的结晶成核界面自由能,起到促进ＰＥＴ结晶成核的作用,从而加快了ＰＥＴ的结晶速度．而结晶促进剂对ＰＥＴ的结晶速度影响很小,不能促进ＰＥＴ的成核结晶,但能使ＰＥＴ结晶更完善,使ＰＥＴ的结晶度提高．当两者并用时,ＰＥＴ由熔体降温的结晶行为主要由成核剂控制,而成核促进剂的作用不明显．     

金刚石中氦、氢含量的变化及在金刚石生长中的意义

天然金刚石自中心至边缘的显微傅里叶变换红外光谱研究表明:氮和氢在金刚石中的分布是不均匀的,这说明金刚石在整个生长过程中的物质环境是有差异的;中心至边缘的含氮总量、C-H键含量的总体降低趋势表明金刚石的生长过程是一个氮、氢的消耗过程,而中部的升高变化说明金刚石生长环境中存在氮、氢的补充,但氮补充得比氢更早一些.据此,可以将金刚石的生长过程划分为早期成核与长大、中期长大及末期长大三个阶段,其中早期和末期是氮和氢的消耗阶段,中期需要进行氮和氢的补充,且氮应该更早补充.氢对金刚石的生长是有利的,氢和氮不是以氮氢化合物的形式存在于金刚石生长的物质环境中,这暗示着在高温高压合成金刚石中欲引入氢,应当避免氮氢化合物的形成.     

Limitation of Auger electron spectroscopy in the determination of the metal-on-oxide growth mode: Pd on MgO(100)

A discussion on the use of Auger electron spectroscopy as a quantitative tool to determine the growth mode of metals on single crystal oxide surfaces is presented. In the case of Pd grown epitaxially on MgO(100), the three-dimensional character of the growth is easily seen at coverage above one monolayer. However, in the submonolayer regime, and mainly at low substrate temperatures, the AES results are ambiguous. The combination of AES with the more sensitive helium-atom diffraction method allows us to demonstrate that the growth is three-dimensional from the early stages, the particles becoming flatter when the substrate temperature decreases. We compare our results with other growth studies on different metal/oxide systems. At low temperature, the ideal growth modes are not always observed, the final morphology of the films being determined mainly by kinetic effects. Thus a pseudo-Stranski-Krastanov growth mode is often obtained with formation of 2D islands followed by 3D clustering from a critical submonolayer coverage.