A Sensitive and Renewable Chlortoluron Molecularly Imprinted Polymer Sensor Based on the Gate‐Controlled Catalytic Electrooxidation of H2O2 on Magnetic Nano‐NiO

A new sensor was fabricated by MIP synthesized on the surface of magnetic nickel(II) oxide (NiO) nanoparticles which based on the oxidation current change of H₂O₂. Chlortoluron was selected as template which can be detected indirectly by the decrease of the H₂O₂ oxidation current on the NiO nanoparticle‐modified GCE caused by the blocking access after rebinding. A high sensitivity was obtained because of the high catalytic effect of NiO nanoparticles on H₂O₂ oxidation. Chlortoluron was determined from 1.0×10^?8/L to 1.0×10^?4 mol/L, with a detection limit of 2.4×10^?9 mol/L. The proposed method combines the high sensitivity of the catalytic effect and the high selectivity of the MIP technique. Water samples were assayed using the MIP sensor, and recoveries of 96.9 % to 104.7 % were obtained.     

Study on new magnetization property and its micro‐mechanism that occurred in anti‐ferromagnetic NiO nanoflowers with nearly uniform size

Temperature‐dependent magnetization and magnon Raman spectra were measured for anti‐ferromagnetic NiO‐nanoflowers. The results show several new magnetic behaviors, including the appearance of a ferromagnetic phase, a reduced Néel temperature (T_N) and a reduced Curie temperature (T_C). The temperature dependencies of the double magnon (2M) Raman wavenumber and intensity are similar to those of magnetization. A magnetic granules model (MGM) consisted of a crystalline core enclosed by a shell is proposed. The model suggests that the large quantity of spins induced by specific surface effect in the shell plays a key role in nano‐magnetism. Based on the MGM, the micro‐mechanism of the observed new magnetic behavior is understood by the magnon Raman spectra. The MGM is based on the general features of magnetic nano‐particles, and thus it should be generally applicable to common magnetic nano‐particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Template-free sonochemical synthesis of hierarchically porous NiO microsphere

A novel template-free sonochemical synthesis technique was used to prepare NiO microspheres combined with calcination of NiO_2.45C_0.74N_0.25H_2.90 precursor at 500 °C. The NiO microspheres samples were systematically investigated by the thermograviometric/differential scanning calorimetry (TG/DSC), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier-transformed infrared spectroscopy (FT-IR), Brunnauer–Emmett–Teller (BET) nitrogen adsorption–desorption isotherms, laser particle size analyzer, and ultraviolet–visible spectroscopy (UV–Vis). The morphology of the precursor was retained even after the calcination process, and exhibited hierarchically porous sphericity. The morphology changed over the ultrasonic radiation time, and the shortest reaction time was 70 min, which was much less than 4 h for the mechanical stirring process. The mechanical stirring was difficult to form the complete hierarchically porous microsphere structure. The BET specific surface area and the median diameter of the hierarchically porous NiO microspheres were 103.20 m²/g and 3.436 μm, respectively. The synthesized NiO microspheres were mesoporous materials with a high fraction of macropores. The pores were resulted from the intergranular accumulation. The ultraviolet absorption spectrum showed a broad emission at the center of 475 nm, and the band gap energy was estimated to be 3.63 eV.     

Synthesis of Porous NiO Nanorods as High‐Performance Anode Materials for Lithium‐Ion Batteries

1D nanostructured metal oxides with porous structure have drawn wide attention to being used as high‐performance anode materials for lithium‐ion batteries (LIBs). This study puts forward a simple and scalable strategy to synthesize porous NiO nanorods with the help of a thermal treatment of metal‐organic frameworks in air. The NiO nanorods with an average diameter of approximately 38 nm are composed of nanosized primary particles. When evaluated as anode materials for LIBs, an initial discharge capacity of 743 mA h g^?1 is obtained at a current density of 100 mA g^?1, and a high reversible capacity is still maintained as high as 700 mA h g^?1 even after 60 charge–discharge cycles. The excellent electrochemical performance is mainly ascribed to the 1D porous structure.     

有序介孔C/NiO复合材料的合成及其电化学性能

以嵌段共聚物F127(Mw=12600, PEO106PPO70PEO106)为模板剂, Ni(Ac)2·4H2O为Ni源, 低分子量的酚醛树酯为碳源, 通过溶胶-凝胶三元共组装方法合成高度有序介孔C/NiO复合材料. 对样品进行X射线衍射(XRD)、透射电子显微镜(TEM)、N2吸脱附等结构表征及循环伏安(CV)等电化学性能测试. 结果显示, NiO晶体和碳组成了C/NiO复合材料的基本骨架, 该复合材料具有高度有序的介孔结构. NiO晶体的存在极大地提高了复合材料的电化学性能, 当C/NiO达到4:1(苯酚与Ni(Ac)2·4H2O的摩尔比)时复合材料的比电容达到444.1 F·g-1, 而有序的介孔结构并没有被破坏, 使得该材料具有较好的应用前景.     

Fabrication of biaxial textured NiO on Ni in a one-step process

A novel method for the preparation of biaxial textured nickel oxide on commercially available nickel via a modified surface oxidation epitaxy (SOE) process has been developed. Following studies of different heat-treatment procedures for both texturing of nickel and for the fabrication of nickel oxide the following method was found to yield the best results. Nickel was first textured under an argon — hydrogen atmosphere at 1000°C for 120 min, then the temperature was lowered to 800°C and the atmosphere was changed to argon with 3 ppm oxygen. Smooth and crack free c-axis textured and a–b aligned NiO buffer layers with an out-of-plane texture of 7.8° and an in-plane texture of 9.4° were successfully produced. Higher oxygen partial pressure and temperatures resulted in increased surface roughness and excessive grain growth.      

Nanosized nickel oxide particles and modification with poly(methyl methacrylate)

In recent years, there is an increasing interest in the fabrication of inorganic–organic materials considering the remarkable change and improvement in properties. In this investigation, nanosized nickel oxide (NiO) particles were first prepared by calcination of nickel hydroxide precursor obtained by a simple liquid‐phase process. Mixed phases of NiO and nickel hydroxide were present as the calcination temperature was lower than 250°C. Non‐stoichiometric NiO was formed between 250°C and 350°C, and a pure NiO was obtained as the temperature reached 500°C. The surface characteristics of NiO particles were evaluated by measuring the adsorption behavior of anionic and cationic surfactants and some biomolecules. NiO/poly(methyl methacrylate) composite particles were then prepared using variable NiO/methyl methacrylate (MMA) ratio by seeded emulsion polymerization. The efficiency of NiO incorporation in the composite increased as the MMA content was increased in the recipe. The composite particles were colloidally stable, and the obtained particles were characterized by Fourier transform infrared, scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectra. Copyright © 2011 John Wiley & Sons, Ltd.     

Surfactant-assisted low-temperature thermal decomposition route to spherical NiO nanoparticles

Thermal decomposition has been employed to access spherical nickel oxide (NiO) nanoparticles from a new precursor, nickel-salicylate, [Ni(C₇H₅O₃)₂(H₂O)₄]. Surfactants, triphenylphosphine ((C₆H₅)₃P), and oleylamine (C₁₈H₃₅NH₂) were added to control the particle size. The products were characterized by X-ray diffraction, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy, and thermogravimetric analysis. TEM images showed particles nearly spherical having sizes 5–15?nm. The magnetism of NiO nanoparticles was studied with a vibrating sample magnetometer. Due to smaller particle size and increased surface uncompensated spins, a superparamagnetic behavior is observed. The synthetic process is simple and affords high-purity material at a relatively lower calcination temperature.     

Cation exchange removal of Zn from aqueous solution by NiO

The PZC and surface area of NiO were determined to be 8.45 and 23 m² g^− 1 respectively. The kinetic data showed that 16 h is sufficient for the adsorption of Zn to reach the equilibrium. Detailed adsorption experiments of Zn from aqueous solution on NiO were conducted under batch process with different concentrations of Zn, time and temperature of the suspension. The solution pH is found to play a decisive role in the metal ions precipitation, surface dissolution and adsorption of metal ions onto the NiO. Langmuir and Freundlich models were used to calculate the maximum adsorption capacity and stability of the complexes formed between Zn and NiO. Both the positive ΔS° and negative ΔG° values demonstrated that the adsorption reaction was spontaneous. The cation exchange sorption of Zn by the NiO was endothermic driven by the entropy increase in the system.     

CuO-NiO助催化剂对TiO2(P25)光催化活性的影响

采用简单的浸渍和化学热解的方法合成了CuO、NiO分别负载及共负载的TiO2(Degussa,P251光催化剂CuO/P25、NiO/P25和CuO-NiO/P25.通过在紫外光下催化降解甲基橙,发现单独负载CuO能提高P25的光催化降解效率,单独负载NiO却降低了P25的光催化活性,而CuO和NiO共负载的P25体系(0.5%CuO-0.1%NiO/P25)的光催化降解效率比0.5%CuO/P25、0.1%NiO/P25、P25分别提高了近8%、17%、15%.实验结果说明:CuO能够有效地分离和累积光生电子从而提高了P25的光催化活性;由于NiO的导带位置与P25不匹配而使P25的光催化效率降低;在共负载的P25体系中,CuO和NiO之间的相互作用可能产生了活性更高的Cu、Ni混合氧化物助催化剂,进而提高了P25的光催化能力.