电子俘获材料Zn_4B_6O_(13)∶Dy~(3+)的热释光特性研究

通过高温固相扩散反应合成了稀土元素镝掺杂的 Zn4 - x B6 O1 3∶ x Dy3+ 磷光体 .测定了该化合物在高能6 0 Co伽玛射线辐照下的热释发光曲线和三维热释光谱 .三维热释光谱表明 ,位于大约 480 nm和 5 80 nm的发光谱带来自于 Dy3+ 离子的 f-f 跃迁 .基质中掺杂的 Dy3+ 离子浓度的变化能够改变陷阱的相对分布 ,随着Dy3+浓度的增加 ,发光峰温向高温方向移动 ,这可提高剂量器的热稳定性 .当辐照剂量增加时 ,发光峰温亦向高温方向移动 ,即陷阱加深 .确定了 Zn3.86 B6 O1 3∶ 0 .1 6Dy3+样品主峰的陷阱深度 E=0 .73 e V,频率因子S=2 .43× 1 0 9s- 1 .在 1～ 1 0 0 Gy治疗级范围内 ,Zn3.86 B6 O1 3∶ 0 .1 6Dy3+ 对 6 0 Co伽玛射线辐照的热释光剂量响应呈良好的线性关系 .实验结果表明 ,Zn3.86 B6 O1 3∶ 0 .1 6Dy3+是一个潜在的应用于临床医疗的伽玛射线电离辐射热释光剂量计材料 .     

A calorimetric study of phase evolution in a WE43 Mg alloy

A DSC investigation has been performed on a Mg–RE–Y–Zr (RE=rare earth) technical alloy WE43. Hardness trend during isothermal treatments has been correlated to the calorimetric traces evolution and to the forming β phases with its precursors. Oversaturation of solute elements occurs at temperatures higher than 150±C, on cooling at room temperature after the anneals. Activation energies, found under non-isothermal conditions on artificially aged samples, suggest a slow transformation velocity, while the hardness response is relatively fast.     

沸石中阳离子对氮/氧吸附性能影响的研究进展

基于制氧吸附剂在变压吸附空分制氧工业应用的重要性，从沸石分子筛的氮／氧吸附性能方面，介绍了低硅沸石LSX、钙沸石、锂沸石、锂银沸石等的研究进展。讨论了沸石分子筛骨架结构和其中阳离子的种类、位置、数量与其吸附特性的关系，探讨其在变压吸附空分制氧中的应用前景。     

Analysis of dielectric relaxations of w/o emulsions in the light of theories of interfacial polarization

An attempt is made to apply dielectric theories of interfacial polarization to observations of dielectric relaxations for W/O emulsions. Approximate formulas for disperse systems in a W/O type were derived from the two theories: one proposed by Maxwell and Wagner for dilute disperse systems of spherical particles, and the other developed by Hanai for concentrated disperse systems. Dielectric measurements were carried out on concentrated W/O emulsions prepared from kerosene and distilled water or KCl aqueous solutions by minimal use of emulsifiers. Marked dielectric relaxations were observed with the emulsions, the dielectric parameters having been determined to characterize the relaxation data. Phase parameters such as relative permittivity, electric conductivity and volume fraction of the disperse phase were evaluated from the dielectric parameters by use of the approximate formulas of the respective theories. The phase parameters evaluated and the frequency dependence of complex permittivity of the W/O emulsions deduced from the theory for concentrated disperse systems are in excellent agreement with the observed data in comparison to that for dilute disperse systems. It is concluded that the dielectric relaxations due to the interfacial polarization of disperse systems of spheres are explained satisfactorily by the theory for concentrated disperse systems.     

碳化钨负载S2O8^2-/ZrO2固体超强酸催化剂上的正戊烷反应研究

首次研究了碳化钨负载S2 O2 -8 ZrO2 (PSZ)固体超强酸催化剂 (WC PSZ)上正戊烷的反应情况及影响催化剂活性的各种因素 ,并用GC MS ,XRD ,BET等手段分析了正戊烷反应产物和催化剂的物理化学性质等 .结果表明 :WC PSZ对正戊烷具有异构化和裂解的双重催化作用 .PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高 ,显示出优于Pt PSZ催化剂的效果 ,碳化钨的负载量为 2 0 %的效果最佳 .适当的焙烧、活化和反应温度等条件是取得良好反应效果的关键     

X-ray investigation of the role of the mixed emulsifier in the structure formation in o/w creams

The aim of this research work was to clarify the role of the mixed emulsifier in the structure formation and water binding mode in the case of o/w creams prepared with different surfactants. The swelling behavior of mixed emulsifiers was examined by means of direct investigation methods such as transmission electron microscopy (TEM) and X-ray diffraction. The detailed structure image of the creams was created with the help of the latter. The influence of the structure of the hydrophilic gel phase, and the structural changes during storage were studied with rheological methods. On the basis of the results, it can be stated that the investigated creams had different structures from those mentioned in the literature: surfactant did not create a mixed bilayer with the structure to furnish fatty amphiphile; instead, micelles were formed. These results correlated well with the results of the rheological tests.     

Y_2O_3∶Eu~(3+)薄膜的制备及发光性能的研究

以稀土氧化物为原料,用溶胶-凝胶法制备前驱液,加入适量的聚乙烯醇做成膜物质,用浸渍拉提法在石英玻璃表面上得到均匀的薄膜,然后经过适当的干燥和热处理得到Y2O3∶Eu3+发光薄膜.讨论了Eu3+的掺杂浓度和热处理温度对薄膜发光性能的影响.试验表明:Eu3+的最佳掺杂浓度为8%(摩尔分数),薄膜的发光性能随热处理温度提高而增强,当热处理温度达到700℃后,薄膜的发光性能基本上稳定.同时用原子力显微镜和X射线衍射分析了薄膜的表面形貌和结构.     

辣根过氧化物酶活性膜结构及生物电催化性能

通过分子沉积法研究了在聚对苯二甲酸乙二醇酯（PET）表面及金电极表面组装辣根过氧化物酶（HRP）/聚对苯乙烯磺酸钠（PSS）多层生物活性膜，用原子力显微镜(AFM)研究了组装膜的表面形貌，并研究了组装膜的形貌、粗糙度和活性关系.应用循环伏安法（CV）研究了组装HRP膜后电极对H2O2的电化学催化还原作用.实验发现，采用亚甲基蓝（MB）溶液为介质，在H2O2浓度为0.2～5.0 mmol•L－1时，其响应电流对H2O2浓度变化基本呈线性.     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

盐卤硼酸盐化学(非汉字字符)——MgO·nB_2O_3-18%MgCl_2-H_2O过饱和溶液20℃结晶动力学

用结晶动力学方法对不同摩尔比的 Mg O/B2 O3在摩尔分数为 1 8% Mg Cl2 -H2 O中的过饱和溶液在2 0℃的结晶动力学过程进行了研究 .n(Mg O) /n(B2 O3) =1 /1和 1 /1 .5时分别结晶析出 2 Mg O· 2 B2 O3·Mg Cl2 · 1 4H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) .n(Mg O) /n(B2 O3) =1 /2时依次结晶析出 Mg O·3 B2 O3· 7.5 H2 O,Mg O· 2 B2 O3· 9H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) 3种固相 .n(Mg O) /n(B2 O3)=1 /3时结晶析出不同结晶水的六硼酸镁 Mg O· 3 B2 O3· 7H2 O和 Mg O· 3 B2 O3· 7.5 H2 O.析出固相采用X射线粉末衍射、红外光谱和热分析进行物相鉴定 .拟合并给出结晶动力学方程 ,同时对水合镁硼酸盐的结晶反应机理进行了探讨