Microwave absorption properties of rod-shaped Co-Ni-P shells prepared by metallizing Bacillus

The rod-shaped Co-Ni-P shells were prepared by metalling Bacillus. The microstructures and composition of the shells were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive analysis (EDS). The electromagnetic parameters were measured by the coaxial line method in the frequency of 2-18 GHz. It was found that the Bacillus were successfully coated with Co-Ni-P, and the inner structure of the shells are hollow in structure. The shells exhibit excellent microwave absorption properties in 5-17 GHz frequency. The microwave reflection loss is above −10 dB in 5.38-16.6 GHz frequency. The maximum microwave reflection loss reaches −35.83 dB at 9.12 GHz for samples thickness 2.4 mm, and the widest bandwidth for microwave reflection loss above −10 dB is about ∼5.32 GHz for samples thickness 2.0 mm. These results confirm the feasibility of applying Bacillus as biotemplates for fabrication of the metallic shells as lightweight microwave absorption materials are very promising for applications.     

Ultrathin Fe film on Cu(0 0 1): Exchange splitting of image states from first principles

The theoretical investigation of the image states in front of an ultrathin iron film grown on copper has been performed by means of the embedding method and a recently developed procedure for the inclusion of the image potential tail in a first principle calculation. From the electronic response to an applied electric field, the image plane position has been evaluated. This also allows one to obtain useful information about the spin dependent screening properties of the system. Exchange splitting, effective mass, and lifetime of such surface states result in good agreement with recently performed two-photon photoemission experiments [see A.B. Schmidt, M. Pickel, M. Wiemhöfer, M. Donath, M. Weinelt, Phys. Rev. Lett. 95 (2005) 107402].     

Effect of various adsorbates in dephasing and population decay of the Cu(1 0 0) image potential states

A theoretical study of the electron dynamics in image potential states on Cu(1 0 0) surfaces with different types of adsorbates is presented. Scattering of the image state electron by an adsorbate induces inter-band and intra-band transitions leading respectively to the population decay and to the dephasing of the image state. We compare results obtained with low coverage (typically 1 adsorbate atom per 1000 surface atoms) Cs, Ar, and a model electronegative adsorbates. As follows from our results, Cs adsorbates lead to both appreciable dephasing and decay, while electronegative adsorbates mostly affect the dephasing rate. The effect of low coverage Ar adsorbates is small, consistent with their neutrality.     

Calculation of electric fields induced near metal implants by magnetic resonance imaging switched-gradient magnetic fields

Electric (E) fields induced near metal implants by MRI switched-gradient magnetic fields are calculated by a new equivalent-circuit numerical technique. Induced E-field results are found for a metallic spinal-fusion implant consisting of two thin wires connected to the metallic case of a current generator as well as for its subsections: a bare U-shaped wire, an insulated U-shaped wire, a cut insulated wire, and a generator. The presence of the metallic implants perturbs the E field significantly. Near the ends of the bare U-shaped wire, the E field is 89.7 times larger than in the absence of the wire. The greatest E field concentration occurs near the ends of the cut insulated wire, where the E field is 196.7 times greater than in the absence of the wire. In all cases, the perturbation of the induced E field by the implanted wire is highly localized within a few diameters of the wire.     

X-ray reflectivity study on gold films during sputter deposition

We performed in-situ X-ray reflectivity measurements of gold films during sputter deposition on polished silicon substrates. The measurements were performed at several substrate temperatures and under two argon pressures. The gold surfaces were also examined by scanning tunneling microscopy after deposition to obtain their real-space topographic images. These images were used to complement the X-ray reflectivity measurements in determining the effect of argon pressure on the gold surface and its height-height difference functions. An approximation for height-height difference functions was employed to analyze the X-ray reflectivity data. The measured interface width during growth followed a simple power law, consistent with recent theoretical results of dynamic scaling behavior. The scaling exponents, however, do not agree well with predictions based on some models in 2 + 1 dimensions.     

Spectroscopic properties of Er3+ ions in cadmium and alkali cadmium borosulphate glasses

Spectroscopic properties of Er³⁺:CBS (CdSO₄+B₂O₃ and R₂SO₄+CdSO₄+B₂O₃, R₂SO₄=Li₂SO₄.H₂O, Na₂SO₄, K₂SO₄ and Gd₂(SO₄)₃.8H₂O) glasses are reported. The assigned energy level data of Er³⁺(4f ¹¹) in these glasses are analysed in terms of a parametrized model Hamiltonian. The standard deviations of the data fits are between 39 and 47 cm⁻¹ so that the energy level schemes of the Er³⁺(4f ¹¹) ions in borosulphate (CBS) glasses are reasonably well reproduced. Radiative properties for the fluorescent levels of Er³⁺:CBS glasses are determined by using the Judd-Ofelt theory. The potential laser transitions are identified with the help of predicted radiative properties which are compared and discussed with similar results.     

Eu3+掺杂铌酸盐玻璃的光谱性质

研究了Eu^3 掺杂铌磷与铌硅系列玻璃的发射光谱，声子边带谱及^5D0能级寿命，计算了样品的强度参数。随着Nb2O5浓度的增加，Eu-O键强增大，共价性增强，Eu^3 的局域环境对称性降低，电－声子耦合增强，^5D0能级的无辐射过程加快，寿命变短，温度猝灭加剧。研究了从77－690K铌磷与铌硅系列玻璃中Eu^3 离子在488nm激光激发下的变温荧光发射特性，求出了温度猝灭速率。分析了发光强度增强与减弱的原因，即热布居与无辐射过程随温度的变化关系，研究了谱线宽度与峰值位置随温度的变化关系。     

恒载超声雾化制取金属粉末的改进方法

本文提出一种改进的超声雾化制取金属粉末方法。克服了因变幅杆负载变化所引起的粉末产率的周期变化，给出装置的框图及有关的参数和实验结果。     

Creep strain recovery of Fe-Ni-B amorphous metallic ribbon

Creep strain recovery and structural relaxation of the amorphous metallic glass Fe₄₀Ni₄₁B₁₉ after longtime loading at different annealing temperatures below the glass transition temperature have been studied using anisothermal differential scanning calorimetry (DSC) and dilatometry (TMA). It has been demonstrated that structural relaxation effects depend on the stress-annealing temperature of the amorphous ribbon. The structural relaxation states of the amorphous ribbon annealed at different temperatures under and without applied stress have been compared. The activation energy spectra were calculated from the anisothermal dilatometric measurements using the modern method based on the Fourier transformation technique. The influence of the annealing temperature on the shape of creep strain recovery spectra has been analyzed.      

Structural properties and electrical behaviour in the polycrystalline lanthanum-deficiency La1−x□xMnO3 manganites

Electrical conductance and X-ray diffraction (XRD) measurements of lanthanum-deficiency La_1−x□_xMnO₃ (x=0.05, 0.10 and 0.20) polycrystalline samples were performed to examine the effect of the internal pressure at B-site on the conduction mechanism. The structural study reveals that all samples crystallize in the rhombohedral system. The electronic conduction appears to be thermally activated at high temperature, which indicates the presence of semiconductor behaviour. The increase of the x content converts 3x Mn³⁺ to 3x Mn⁴⁺ ions with smaller ionic radius, which reduces the internal pressure and leads to the increase of the one-electron bandwidth W. This increase causes the appearance of metallic behaviour at low temperature for x=0.10 and 0.20 content.