Water permeability in MXene membranes: Process matters

Recent studies have shown impressive transport behaviors of water and ions within lamellar MXene membranes,which endows great promise in developing advanced separation application based high performance MXene membranes.However,most of the researches focused on modification of MXene nanoflakes and optimizing interlayer distance,leaving the impact of membrane fabrication process marginal.In this work,we studied the water flux of membranes made by vacuum filtration using delaminated MXene nanoflakes as the building-blocks.Our results show that the water permeability is extremely sensitive to the process,especially at the drying process,loading and deposit rate of nanoflakes(the feeding concentration).We find that the voids from less ordered stack rather than in-plane defects and interlayer galleries contribute to the large water permeability.The voids can be effectively avoided via deposition of MXene nanoflakes at a slow rate.Manipulating the stack of MXene nanoflakes during vacuum filtration and drying are critical for development of MXene membranes with desired performance for water permeation.     

Antibiotics Separation with MXene Membranes Based on Regularly Stacked High‐Aspect‐Ratio Nanosheets

The uncontrolled release of antibiotics and pharmaceuticals into the environment is a worldwide increasing problem. Thus, highly efficient treatment technologies for wastewater are urgently needed. In this work, seven kinds of typical antibiotics (including water and alcohol soluble ones) are successfully separated from the corresponding aqueous and ethanolic solutions using highly regular laminated membranes. Our membranes are assembled with 2–4 μm titanium carbide nanosheets. The solvent permeance through such titanium carbide membrane is one order of magnitude higher than that through most polymeric nanofiltration membranes with similar antibiotics rejection. This high flux is due to the regular two‐dimensional (2D) structure resulting from the large aspect ratio of titanium carbide nanosheets. Moreover, the electrostatic interaction between the surface terminations and the antibiotics also affects the rejection and enhances the antifouling property. Such 2D titanium carbide membranes further broaden the application scope of laminated materials for separation and purification of high value added drugs in academia and industry.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

A Hybrid Assembly of MXene with NH2−Si Nanoparticles Boosting Lithium Storage Performance

A facile hybrid assembly between Ti₃C₂T_x MXene nanosheets and (3‐aminopropyl) triethoxylsilane‐modified Si nanoparticles (NH₂?Si NPs) was developed to construct multilayer stacking of Ti₃C₂T_x nanosheets with NH₂?Si NPs assembling together (NH₂?Si/Ti₃C₂T_x). NH₂?Si/Ti₃C₂T_x exhibits a significantly enhanced lithium storage performance compared to pristine Si, which is attributed to the robust crosslinking architecture and considerably improved electrical conductivity as well as shorter Li⁺ diffusion pathways. The optimized NH₂?Si/Ti₃C₂T_x anode with Ti₃C₂T_x: NH₂?Si mass ratio of 4 : 1 displays an enhanced capacity (864 mAh g^?1 at 0.1 C) with robust capacity retention, which is significantly higher than those of NH₂?Si NPs and Ti₃C₂T_x anodes. Furthermore, this work demonstrates the important effect of the MXene‐based electrode architecture on the electrochemical performance and can guide future work on designing high‐performance Si/MXene hybrids for energy storage applications.     

单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

二维材料改性水性聚氨酯防腐涂料的研究进展

水性聚氨酯涂料作为一种新兴的环保涂料,在防腐领域得到了广泛应用。然而,水性聚氨酯涂料交联密度低,耐水性稍差,不利于其长效防腐性能。利用具有独特物理化学特性的二维材料作为水性聚氨酯的填料,可以有效改善其性能。本文主要介绍了三种二维材料(石墨烯、MXene和六方氮化硼)作为填料与水性聚氨酯进行复合,并重点介绍了石墨烯、MXene和六方氮化硼的改性方法,并对水性聚氨酯复合涂层的性能进行了阐述和比较,最后对未来二维材料/水性聚氨酯的复合材料的发展和应用进行了展望。     

Nanostructured Ni/Ti_3C_2T_x MXene hybrid as cathode for lithium-oxygen battery

Ti_3C_2 belongs to MXenes family,which is a new two-dimensional material and has been applied in many fields.With simple method of hydrothermal and high temperature calcination,nano structured Ni/Ti_3C_2T_x hybrid was synthesized.The stable layer structure of Ti_3C_2 MXene providing high surface area as well as excellent electronic conductivity are beneficial for deposition and decomposition of discharge product Li_2O_2.Furthermore,possessing special catalytic activity,Ni nanoparticles with size of about 20 nm could accelerate Li_2O_2 breaking down.Taking advantage of two kinds of materials,Ni/Ti_3C_2T_x hybrid as cathode of Li-O_2 battery can achieve a maximal specific capacity of 20,264 mAh/g in 100 mA/g and 10,699 mAh/g in 500 mA/g at the first cycle.This work confirms that the prepared Ni/Ti_3C_2T_x hybrid exhibiting better cycling stability points out a new guideline to improve the electrochemical performance of lithium-oxygen batteries.     

3D crumbled MXene for high-performance supercapacitors

MXene materials have recently attracted considerable attention in energy storage application owing to their metallic conductivity, 2D structure and tunable surface terminations. However, the restacking of 2D MXene nanosheets hinders the ion transport and accessibility to the surface, resulting in adverse effect on their electrochemical performances. Here, with the assistance of hexamethylenetetramine (C₆H₁₂N₄), 2D Ti₃C₂T_x MXene nanosheets were fabricated into a 3D architecture with crumbled and porous structure through an electrostatic self-assembly followed by annealing. The resultant 3D structure can expose massive active sites and facilitates the ion transport, which is beneficial for sufficient utilization of the outstanding superiorities of the MXene. Therefore, as a pseudocapacitive material, the 3D crumpled and porous Ti₃C₂T_x MXene shows a gravimetric capacitance of 333 F/g at 1 A/g, and maintains 261 F/g and 132 F/g at ultrahigh current densities of 100 A/g and 1000 A/g, respectively, revealing promising potential for application in supercapacitors.     

轨道对称性匹配:MXene基体上的单原子催化以实现优异的氮还原反应

氨作为一种可被植物直接吸收用以合成其他有机物的重要成分,在化学化工及含氮化合物的生产当中起着至关重要的作用.传统工业生产氨气采用Haber-Bosch工艺,将空气中丰富的氮气转化为氨气,但该工艺需要较高的压强和温度来促进氮气分解,因此会消耗大量能源.近年来,电催化反应发展迅速.在电催化工艺中,通过控制操作电位及电解质便可提高生产效率,降低能源消耗.基于这种策略,各种针对能源环境的催化研究应运而生,如二氧化碳还原、水分解反应等.其中,对于氮还原的催化研究尤其是电催化设计领域研究相对较少.研究发现,在电催化剂中,异构掺杂及原子尺度的调控可以极大地影响催化剂的催化活性.其中,单原子催化(SAC)因其在催化活性和催化选择性上的优势受到广泛关注.MXene是一种二维过渡金属碳化物或氮化物,其优异的化学性能和稳定的表面构型可以对单原子起到良好的锚定与支撑作用,是一种更具潜力的单原子催化基体.本文基于上述思想,利用密度泛函第一性原理等模拟软件,设计并研究了以MXene为基体的28种过渡金属单原子催化体系,计算并分析了各SAC@MXene体系对氮还原反应的催化效果,从限制电势、催化路径、反应机制等方面探索了其催化性能.并对体系进行了态密度、晶体轨道哈密顿量、差分电荷密度等电子结构分析,找到了适用于MXene体系的单原子催化设计原则.通过对限制电势的计算表明,Ni@MXene和Co@MXene体系具有很低的限制电势(-0.13和-0.17 V),说明这些体系在较低的启动电压下即可发生氮还原反应.研究发现了一种新型适用于SAC@MXene氮催化体系的酶促-远端反应机制.电子结构分析得到SAC原子与MXene基体的Ti原子在催化过程中存在一种协同作用.态密度及晶体轨道哈密顿量也显示出SAC原子与MXene基体Ti之间的一种轨道对称性匹配关系,揭示了这种协同作用对催化反应的积极作用.计算的氢析出反应(HER)结果也显示,在相同化学环境下,SAC@MXene体系氮还原反应相对于氢析出反应更易发生.     

MXene-碳黑/硫复合材料在锂硫电池一体式电极的研究

锂硫电池的实际能量密度不高和多硫化物（LiPSs）的穿梭效应等问题严重影响了该电池的实际应用。本文通过将二维的Ti₃C₂T_x Mxene纳米片与碳黑/硫（CB/S）材料进行混合,制备了Ti₃C₂T_x-CB/S正极材料并将其涂覆在商业隔膜（PP）上,最终获得了Ti₃C₂T_x-CB/S-PP一体式电极并用于锂硫电池。利用Ti₃C₂T_x纳米片对CB/S进行修饰,不仅能提高活性物质硫的导电性,还能对扩散的LiPSs进行物理阻挡和化学吸附。而一体式电极的设计有利于提高电池的能量密度。恒流充放电测试结果表明,Ti₃C₂T_x-CB/S-PP电极在0.1 C电流下的初始放电容量为1028.8 mAh·g^-1,高于不含Ti₃C₂T_x的CB/S-PP电极的896.8 mAh·g^-1。Ti₃C₂T_x-CB/S-PP电极还展示出了比基于传统铝箔集流体的Ti₃C₂T_x-CB/S-Al电极更好的循环稳定性,前者在0.5 C下400圈长循环测试中的每圈衰减率为0.072%,而后者则为更高的0.10%。本文利用Ti₃C₂T_x-CB/S构建一体式电极的策略为实现高性能和高能量密度的锂硫电池提供了新的研究方向。