Phase Diagram of Gelatin Plasticized by Water and Glycerol

Summary: Gelatin is widely used in capsules manufacturing. Most of the capsules in pharmaceutical applications are hard capsules made out of concentrated solutions of gelatin, where water has been progressively removed during the drying process. More recently soft capsules found an increasing interest in pharmaceutical and cosmetic applications where they are filled and sealed with a liquid substance. In order to keep the shells of capsules flexible after drying at room temperature, plasticizer is added to the gelatin aqueous solutions. We present in this paper a systematic investigation of gelatin films, equilibrated under a range of relative humidity (RH). The films contain glycerol as plasticizer P or only water and gelatin, (G). In order to analyze the role of the plasticizer, we fixed various P/G ratios and measured the water retention versus RH. Films were characterized by DSC (Mettler Toledo DSC823). Glass transition temperature T_g, melting temperature T_m and enthalpy associated with helix-coil transition were determined. The role of water and glycerol was examined in relation with the large variations of these transition temperatures with film composition. Non equilibrium effects are also discussed, in particular concerning the glass transition temperature, the relaxation effects and the water repartition between amorphous coils and helical structure. In conclusion, we propose a unique phase diagram of the gelatin films with any proportion of water and glycerol.     

溶液酸度和反应温度对CaMoO4薄膜电化学制备的影响

本工作研究了恒电流电化学技术制备CaMoO₄薄膜工艺中，溶液酸度和反应温度对薄膜形成的影响。结果表明，酸度会影响薄膜的生长时间和光致发光特性，在较低酸度沉积薄膜时，容易造成薄膜的团簇生长和不确定相的形成；适当升高反应温度会加快晶粒的生长、提高薄膜的纯度、增加薄膜发射光谱的相对强度。在CaMoO₄薄膜电化学制备工艺中，溶液pH值控制在12.0附近和反应温度控制在60 ℃的左右比较好。     

A portable sensor for the rapid detection of naphthalene acetic acid in fruits and vegetables using stabilized in air lipid films with incorporated auxin-binding protein 1 receptor

The present technique describes the development of a simple sensitive spot optical test and the construction of a portable biosensor for the rapid one-shot detection of naphthalene acetic acid (NAA) using stabilized lipid films supported on a methacrylate polymer on a glass fiber filter with incorporated auxin-binding protein 1 receptor. The lipid films without the receptor provided fluorescence under a UV lamp. The use of the receptor in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of naphthalene acetic acid provided a “switching on” of the fluorescence which allows the rapid detection of this stimulant at the levels of 10⁻⁹ M concentrations. It was also possible to have quantitative data based on a calibration graph. The effect of potent interferences included a wide range of compounds. The results showed no interferences from these compounds in concentration levels usually found in real samples. The method was applied for the determination of NAA in fruits and vegetables and the reproducibility of the method was checked in about 50 samples. A quantitative method for the detection of NAA in crops that can be complimentary to HPLC methods is provided in the present paper. These lipid films can be used as portable biosensors for the rapid one-shot detection of NAA in fruits and vegetables by non-skilled personnel in the field.     

Interfacial behavior and film patterning of redox-active cationic copper(II)-containing surfactants

Herein, we describe the synthesis and characterization of a novel series of single-tail amphiphiles LPyCn (Py=pyridine, Cn=C18, C16, C14, C10) and their copper(II)-containing complexes, which are of relevance for patterned films. The N-(pyridine-2-ylmethyl)alkyl-1-amine ligands and their complexes [CuIICl2(LPyC18)] (1), [CuIICl2(LPyC16)] (2), [CuIICl2(LPyC14)] (3), [CuIIBr2(LPyC18)] (4), [CuIIBr2(LPyC16)] (5), and [CuIIBr2(LPyC10)] (6) were synthesized, isolated, and characterized by means of mass spectrometry, IR and NMR spectroscopies, and elemental analysis. Complexes 1, 2, 3, and 6 had their molecular structure solved by X-ray diffraction methods, which showed that the local geometry around the metal center is distorted square planar. With the aim of using these species as precursors for redox-responsive films, an assessment of their electrochemical properties involved cyclic voltammetry in different solvents, with different supporting electrolytes and scan rates. Density functional theory calculations of relevant species in bulk and at interfaces were used to evaluate their electronic structure and dipole moments. The morphology and order of the resulting films at the air/water interface were studied by isothermal compression and Brewster angle microscopy. Biphasic patterned Langmuir films were observed for all complexes except 3 and 6, and dependence on the chain length and the nature of the halogen coligand determine the characteristics of the isotherms and their intricate topology. Complexes 3 and 6, which have shorter chain lengths, failed to exhibit organization. These results exemplify the first comprehensive study of the behavior of single-tail metallosurfactants, which are likely to lead to high-end technological applications based on their patterned films.     

Effects of X-ray radiation on the surface chemical composition of plasma deposited thin fluorocarbon films

Different thin fluorocarbon (FC) films were deposited on Si(111) using plasma polymerisation and then exposed to X-ray radiation. Changes in the chemical composition of the deposited fluorocarbon films as a function of irradiation time were investigated in situ using X-ray photoelectron spectroscopy. The evaluation of the C1s and F1s core level induced emission as a function of exposure to X-ray radiation (Mg Kα, hν = 1253.6 eV) reveals changes in the surface chemical composition of the FC polymer structure. The presented results indicate a high defluorination under X-ray irradiation. Additionally, binding energy shifts of the F1s and C1s peaks during the exposure associated with surface charging effects were observed. With ongoing exposure the surface charging decreases continuously and the FC surfaces become more conductive due to changes in the polymer structure. Different models have been used to describe the decomposition kinetics and surface composition.     

Applications of Tamm plasmon-liquid crystal devices

ABSTRACT

The Tamm-plasmon-polariton (TPP) occurs at the interface between a metallic film and the photonic-crystal (PC) substrate. Unlike conventional surface-plasmon-polariton (SPP), TPP can be directly excited by both the transverse electric (TE) and transverse magnetic (TM) electromagnetic waves without using additional coupling optics. The fact that the optical functionality of most plasmonics devices is determined after fabrication limits their applications. Tunable SPP devices by applying liquid crystals (LCs) have been widely demonstrated due to their large birefringence and easy controllability via external stimuli. However, actively tuning TPP is difficult because the localised electric field is between the metallic film and PC substrate, the change of refractive index above the metallic film has only small influences on TPP. This article is intended to briefly review recent progress towards using LCs for actively tuning TPP devices. Not only TPP devices can gain benefits from LCs, we will also discuss the applications of TPP for measuring the anisotropy of the alignment films of LC devices. The sensitivity of the proposed scheme will be discussed.     

Expanding the Toolbox of Metal–Phenolic Networks via Enzyme‐Mediated Assembly

Functional coatings are of considerable interest because of their fundamental implications for interfacial assembly and promise for numerous applications. Universally adherent materials have recently emerged as versatile functional coatings; however, such coatings are generally limited to catechol, (ortho‐diphenol)‐containing molecules, as building blocks. Here, we report a facile, biofriendly enzyme‐mediated strategy for assembling a wide range of molecules (e.g., 14 representative molecules in this study) that do not natively have catechol moieties, including small molecules, peptides, and proteins, on various surfaces, while preserving the molecule's inherent function, such as catalysis (≈80 % retention of enzymatic activity for trypsin). Assembly is achieved by in situ conversion of monophenols into catechols via tyrosinase, where films form on surfaces via covalent and coordination cross‐linking. The resulting coatings are robust, functional (e.g., in protective coatings, biological imaging, and enzymatic catalysis), and versatile for diverse secondary surface‐confined reactions (e.g., biomineralization, metal ion chelation, and N‐hydroxysuccinimide conjugation).     

Reversibly Switching the Charge State and Adsorption Location of A Single Potassium Atom on Ultrathin CuO Films

Potassium (K) cations are spontaneously formed upon thermal deposition of low‐coverage K onto an ultrathin CuO monolayer grown on Cu(110) and they were explored by low‐temperature scanning tunneling microscopy (STM) and X‐ray photoemission spectroscopy. The formed K cations are highly immobile and thermally stable. The local work function around an individual K cation decreases by 1.5±0.3 eV, and a charging zone underneath it is established within about 1.0 nm. The cationic and neutral states of the K atom are switchable upon application of an STM bias voltage pulse, which is simultaneously accompanied by an adsorption site relocation.     

Excitation‐Dependent Long‐Life Luminescent Polymeric Systems under Ambient Conditions

Organic room temperature luminescent materials present a unique phosphorescence emission with a long lifetime. However, many of these materials only emit single blue or green color in spite of external stimulation, and their color tunability is limited. Herein, we report a rational design to extend the emission color range from blue to red by controlling the doping of simple pyrene derivatives into a robust polymer matrix. The integration of these pyrene molecules into the polymer films enhances the intersystem crossing pathway, decreases the first triplet level of the system, and ensures the films show a sensitive response to excitation energy, finally yielding excitation‐dependent long‐life luminescent polymeric systems under ambient conditions. These materials were used to construct anti‐counterfeiting patterns with multicolor interconversion, presenting a promising application potential in the field of information security.     

Bifunctional Nanoscale Assemblies: Multistate Electrochromics Coupled with Charge Trapping and Release

We demonstrate controlled charge trapping and release, accompanied by multiple color changes in a metallo‐organic bilayer. The dual functionality of the metallo‐organic materials provides fundamental insight into the metal‐mediated electron transport pathways. The electrochemical processes are visualized by distinct, four color‐to‐color transitions: red, transparent, orange, and brown. The bilayer is composed of two elements: 1) a nanoscale gate consisting of a layer of well‐defined polypyridyl ruthenium complexes bound to a flexible transparent electrode, and 2) a charge storage layer consisting of isostructural iron complexes attached to the surface of the gate. This gate mediates or blocks electron transport in response to an applied voltage. The charge storage and release depend on the oxidation state of the layer of ruthenium complexes (=gate). Combining electrochemistry with optical data revealed mechanistic information: the brown coloration of the bilayer directly relates to the formation of intermediate ruthenium species, providing evidence for catalytic positive charge release mediated through the gate.