Characterization of SiO2-P2O5-ZrO2 Sol-Gel/NAFION™ Composite Membranes

Composite membranes were prepared by (a) infiltrating NAFION with SiO₂-P₂O₅-ZrO₂ sol, and (b) recasting a film using NAFION solution containing SiO₂-P₂O₅-ZrO₂ sol. The membranes were characterized by Differential Thermal Analysis and ac-impedance spectroscopy as a function of relative humidity. The influences of the heat treatment (80°C–150°C) and cleaning on the electrical properties were investigated. The incorporation of SiO₂-P₂O₅-ZrO₂ gels into NAFION lead to improvements in its thermal stability and proton conductivity.     

On the initial layer solution of the Boltzmann equation with small Knudsen number

We extend our method of systematic removal of secular terms in a singular perturbation treatment of the Boltzmann equation with small Knudsen numbers to the initial layer. The requirement that the solution through the initial layer should connect smoothly to the normal solution removes an ambiguity noted in our previous paper. We show that removal of secular terms improves Grad's solution for the initial layer and reintroduces soundlike modes associated with higher moments, first found by Wang Chang and Uhlenbeck.     

Electrochemical characteristics of Ce0.8Gd0.2O1.9|La0.6Sr0.4CoO3-δ + Ce0.8Gd0.2O1.9 half-cell

The analysis of the medium temperature half-cell Ce_0.8Gd_0.2O_1.9|70 wt% La_0.6Sr_0.4CoO_3- (LSCO) + 30 wt % Ce_0.8Gd_0.2O_1.9 (CGO) has been made by electrochemical impedance, cyclic voltammetry and chronoamperometry. The shape of complex impedance plots depends on temperature and cathodic polarisation of the electrode. Nyquist (Z, Z-) plots were fitted by equivalent circuit taking into account the electrolyte properties (at very high frequencies), charge transfer process at grain boundaries (at high frequencies), and medium and low frequency O₂ reduction process at the cathode surface and inside the porous cathode material. Two different time constants have been obtained for the cathode process, i.e. for electroreduction of oxygen. It was found that the addition of CGO into the cathode material (LSCO) only somewhat decreases the surface catalytic activity but the noticeably higher low-frequency resistance (i.e. mainly diffusion-like mass transfer resistance R_D) values at lower temperatures have been calculated. It was found that the mainly bulk diffusion-limited process at T773 K deviates toward the kinetically mixed process (diffusion + charge transfer) with increasing temperature.     

Synthesis and Characterization of Tetraosmium Carbonyl Complexes Containing a Bridging CO2 Ligand

Treatment of (thd)H (thd=2,2,6,6-tetramethyl-3,5-heptandionate) with excess Os₃(CO)₁₂ in an autoclave at 180°C gives the formation of a brown metal chain complex [Os₂(CO)₅(thd)₂]₂ (1) and a yellow CO₂ cluster complex [Os₄(-H)(-CO₂)(thd)(CO)₁₃] (2) in low yields. Complex 2 was fully identified by a combination of spectroscopic methods and X-ray diffraction study, showing a unique CO₂ ligand bridging a triosmium metal fragment, Os₃(-H)(CO)₁₀ and a monometallic osmium fragment, Os(CO)₃(thd). Upon treatment of 1 with Me₃NO at an elevated temperature, oxidation of the CO ligand occurred at the position trans to the unique CO₂ ligand on the Os(CO)₃(thd) fragment, giving the formation of a second CO₂ cluster [Os₄(-H)(-CO₂)(thd)(CO)₁₂(NCMe)] (3), which is stabilized by a weakly coordinated acetonitrile molecule.     

Novel type of heterogenized CuCl2 catalytic systems for oxidative carbonylation of methanol

A novel type of heterogenized CuCl₂ catalysts was designed for the oxidative carbonylation of methanol to dimethyl carbonate (DMC) taking account of the plausible reaction mechanism and intermediates. To prevent severe corrosion of the reaction equipment materials due to Cl^– while keeping the catalytic activity of the homogeneous CuCl₂ catalyst, we adopted, as supports (or ligands) of CuCl₂, four polymers, bearing a 2,2-bipyridine (bpy) or pyridine (py) unit, namely, poly(2,2-bipyridine-5,5-diyl) (Pbpy), poly(pyridine-2,5-diyl) (Ppy), poly(N,N-bisphenylene-2,2-bipyridine-4,4-dicarboxylic amide) (Bpya), and poly(4-methyl-4-vinyl-2,2-bipyridine) (Pvbpy), together with one chelate compound, 8-quinolinol. The catalytic activity, stability of heterogenized CuCl₂ and their corrosivities to stainless steels were examined in the liquid-phase reaction of the oxidative carbonylation of methanol. These polymer-supported catalysts showed considerable catalytic activity and stability for the DMC synthesis. In particular, the Pbpy-CuCl₂ and Ppy-CuCl₂ catalysts exhibited high DMC yields and selectivity comparable to those of the homogeneous CuCl₂ catalyst. This high activity appears to be associated with the presence of the -conjugated system in the polymers, which affect the redox reactions of Cu involved in the catalytic reaction. All of the polymer-supported CuCl₂ catalysts could be easily recycled after filtration, and the initial catalytic activity was maintained after three times of use. The corrosive characters of the catalysts were closely related to CuCl₂ leaching from the supports, which reflects the ability of supports to coordinate Cu. These experimental results suggest that both the electronic structure and the coordination ability of the polymer supports are key factors for the development of an effective catalytic system.     

π-Bindungsbeitrag in Boranen, 2. Mitt.:Ab initio- und Kraftfeld-Rechnungen von Vinyldifluorboran

Ab initio calculations on vinyldifluoroborane yield a -contribution of 23 kJ/mol (5.5 kcal/mol) mainly due to the C=C bond and not to the lone pairs of the fluorine atoms. The rotational barrier was also determined. The force field calculations favour the interpretation of the bond structure derived from the theab initio results.

     

Absence of p,π-conjugation in the Cl2C=CHOMe molecule from data ofab initio calculations

ab initio Calculation of the Cl₂C=CHOMe molecule has been carried out with geometrical optimization in the split valence basis set in the RHF/6-31G^*//RHF/6-31G^* approximation. An analysis of the populations of the p-orbitals of the Cl atoms implies the absence of p,-conjugation between the unshared electron pairs of these atoms and the -bond. The asymmetry parameters of the electric field gradient at the³⁵Cl nuclei, calculated from the 3p-orbital populations of the Cl atoms, practically coincide with the experimental values.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2369–2372, December, 1995.The authors are grateful to G. S. Beloglazov for assistance in accomplishingab initio calculations.     

Phosphorescence lifetime of naphthalene and phenanthrene in aggregated aromatic molecule-β-cyclodextrin-precipitant complexes

Aggregated aromatic molecule--cyclodextrin-precipitant complexes exhibit long-lived phosphorescence at room temperature in water after the chemical binding of oxygen. The temperature dependences of the phosphorescence lifetimes of naphthalene-h₈, naphthalene-de, and phenanthrene in the aggregates were measured. For example, the phosphorescence lifetimes of naphthalene-d₈ aggregated with -cyclodextrin and cyclohexane are equal to 25.1, 17.6, and 6.8 s at 77, 276, and 347 K, respectively, and that of phenanthrene aggregated with isooctane and -cyclodextrin are 3.24, 3.06, and 1.26 s at 268, 274, and 335 K, respectively. The temperature dependences of the phosphorescence lifetimes at room temperature are determined by the rate constants of the radiative and nonradiative transitions from the triplet state of an aromatic molecule.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2225–2228, September, 1996.     

A novel vapor phase process for aromatic ketone synthesis

The vapor phase catalytic reaction between aromatic carboxylic acid and acetic acid was investigated. Many metal oxides catalyzed the reaction between 2methylbenzoic acid (OTA) and acetic acid (AA) to produce 2methylacetophenone (OMA), and weakly acidic oxides such as Th, U, Ce, and La oxide exhibited higher yield of OMA. The OMA yield depended on the catalyst support. SiO₂, Al₂O₃, TiO₂, and ZrO₂ with a surface area of less than 200 m² g^–1 appeared to be suitable as industrial catalyst supports. CeO₂ on Al₂O₃was chosen as an industrial catalyst for the synthesis of OMA because of higher productivity, longer catalyst life, and lifting of legal restrictions on catalyst handling. This catalyst system can also be applied to the syntheses of acetophenone, nitroacetophenone, and chloroacetophenone.