丙烯腈水相沉淀聚合研究进展

结合近几年的研究成果,笔者对丙烯腈水相沉淀聚合机理、聚合动力学、动力学数学模型诸方面问题进行了系统的综述,反映了该领域的研究概况和最新研究成果.     

绝热法研究己内酰胺阴离子聚合尼龙动力学

采用己内酰胺钠盐、N-75缩二脲作为反应催化体系, 确定反应温度在145-160 ℃之间, 通过计算得到动力学参数: 反应级数为准一级、活化能在73.2-77.1 kJ·mol-1之间、指前因子在2.9×1011-3.6×1011 mol1-n·s-1范围内. 本实验条件下测定并计算的反应热为134.5-137.3 J·g-1, 与文献值(138.6 J·g-1)吻合. 并在前人基础上修正并建构了己内酰胺阴离子绝热反应动力学模型, 对反应过程的模拟结果与实验数据基本吻合, 从而证明了本模型的正确合理.     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下，于298~313 K区间氧化四氢糠醇(THFA)的反应动力学. 结果表明，反应对铈(IV)离子为一级，对铱(III)离子也为一级，对四氢糠醇的表观反应级数为正分数. 准一级速率常数kobs随[H+]增加而增大，而随[HSO₄－]增加而减小. 在氮气保护下，反应能引发丙烯腈聚合，说明在反应中有自由基产生. 通过kobs与[HSO₄－]的依赖关系，找到本反应体系的动力学活性物种是Ce(SO₄)₂，并计算出平衡常数，速控步骤的速率常数及相应的活化参数.     

Kinetics and Mechanism of Ni(II) Chelation in Model and Real Solutions of Xylem Sap of Quercus ilex

The kinetics of formation and dissociation of Ni(II) complexes with oxalic and citric acids was studied by cyclic voltammetry in model solutions of xylem sap of Q. ilex (the dominant tree growing on serpentine soils of Northeast Portugal) using representative concentrations, pH and ionic strength. The role of magnesium on complex formation was analyzed from solutions where Mg is present at concentration levels found in the xylem sap of Q. ilex growing on both nonserpentine and serpentine soils. Kinetics studies were also done in diluted solutions of real xylem sap samples, spiked with increasing amounts of magnesium. The values obtained for the apparent rate constants were those anticipated by the proposed model. To test the validity of the methodology and mechanisms, formation rate constants, k_f (M^?1 s^?1) of Ni(II) complexes with citrate and oxalate were evaluated that compare with the values from Eigen mechanism.     

Aggregation of iron colloids in estuaries: a heterogeneous kinetics study using continuous mixing of river and sea waters

The kinetics of iron colloid aggregation in estuaries have been simulated with a model estuary in which seawater is continuously pumped into a reservoir initially containing river water. Profiles of colloidal Fe concentration versus salinity produced in this apparatus closely resembled field data for actual estuaries. Synthetic Fe colloids prepared by peptising Fe(OH)₃ with humic acid and phosphate showed very similar kinetic behaviour. Aggregation rate was found to be almost independent of velocity shear rate, implying that most aggregations are induced by brownian interparticle collisions. A heterogeneous kinetic model is proposed to explain the kinetic behaviour of Fe colloids during seawater-induced aggregation. This model describes kinetic behaviour in terms of a log-normal distribution of rate constants characterised by a mean value k and a standard deviation γ. Experiments showed that k is linearly related to the rate constant for salinity increase during mixing. This coupling of salinity changes and aggregation rate leads to Fe-salinity profiles that are nearly independent of the rate of salinity change, but which are dependent on γ.     

超临界二氧化碳中卟啉与钴(II)、镍(II)、锌(II)配合物反应动力学

用紫外-可见光谱研究了钴(II)、镍(II)、锌(II)的1, 1, 1, 5, 5, 5-六氟-2, 4-戊二酮-二水配合物[M(hfac)2(H₂O)₂, M=Co、Ni、Zn]与5, 10, 15, 20-四(五氟苯基)卟啉[H2tpfpp]在超临界二氧化碳中反应生成金属卟啉[M(tpfpp)]的反应动力学. 在金属配合物大大过量时, 反应对卟啉为一级. 其表观一级速率常数随钴(II)、镍(II)配合物的浓度增加先增加、而后趋于稳定, 而表观一级速率常数随锌(II)配合物的浓度增加线形增加. 根据实验事实, 讨论了反应的机理, 得到了相应的热力学和动力学参数.     

Thermogravimetric study of flame-retarding properties on phosphorylated beech sawdust

Beech sawdust (S) and samples containing 1% of H₃PO₄ (SP), (NaPO₃)_n (PS), P₂O₅ (POS), NaOH/P₂O₅ (SPS), NaOH (SS) or Na₂CO₃ (CS) were analysed using dynamic and isothermal thermogravimetry (TG) in nitrogen and oxygen environments. According to the results of dynamic experiments in nitrogen, the thermal resistance at 275 °C decreased in the order: S > SS > CS > SP> SPS > PS > POS, while in oxygen the order was: S > POS > SPS=CS=PS > SP > SS. The difference in residues obtained in nitrogen in comparison to oxygen environment reaches its maximum at temperatures from 300 to 325 °C and according to the decreasing values the following order could be listed: SS (300 °C/27%) > SP (325 °C/25%) > CS (300 °C/24%) > S (325 °C/23%) > SPS (300 °C/19%) > PS (300 °C/11%) > POS (275 °C/4%). This indicates that with a decreasing difference in residues formed in oxidative and inert environments the flame-retardant effect of the sample is increasing. The calculated initial rate constants of residue formation and gasification and the corresponding activation energies of the processes in nitrogen and oxygen from the isothermal experiments gave smaller values of rate constants for SPS than for S. For the SPS sample in comparison with S the activation energy of residue formation in nitrogen decreased while the three remaining values increased. The E_r* of PS in the oxygen is the biggest from all studied samples under the conditions used, while SPS gave the biggest E_g* in the oxygen environment. The phosphorus could be washed out with water from SP and SPS, while it remained in PS and POS. These last two samples also have the best flame-retarding properties according to TG analysis.     

热致液晶聚酯酰亚胺的非等温相转变动力学研究

以差示扫描量热法对热致液晶聚酯酰亚胺的结晶过程和液晶化过程的非等温相转变动力学行为进行了初步研究，根据Ｊｅｚｉｏｒｎｙ方法处理数据得到了表征聚合物非等温相转变动力参数Ｚｃ，Ｇｃ并对其进行了讨论，结果表明，在所研究的条件下聚合物的相转变过程基本上符事Ｊｅｚｉｏｒｎｙ结论，但两种相转变的成核与生长方式是不同的。     

臭氧与二乙胺和三乙胺气相反应的速率常数

利用自制的烟雾箱系统研究了臭氧与二乙胺和三乙胺的气相反应动力学. 实验过程中保证二乙胺和三乙胺浓度远远大于臭氧浓度, 使得实验在准一级条件下进行. 加入环己烷以消除实验过程中可能产生的OH自由基对反应的影响. 在(298±1) K和1.01×105 Pa条件下, 测得臭氧与二乙胺和三乙胺反应的绝对速率常数值分别为(1.33±0.15)×10^-17和(8.20±1.01)×10^-17 cm³·molecule^-1·s^-1. 与文献中已有的其它胺类的臭氧反应数据比较后发现, 臭氧与胺的反应可以用亲电反应机制来解释. 另外, 通过对比发现, 臭氧与三取代的烷基胺类的反应速率要远远大于其与二取代的烷基胺类的反应速率. 这在一定程度上可有助于解释外场观测到的气溶胶相中二烷基胺盐较多的事实. 利用测得的速率常数和大气中臭氧浓度, 还估算了二乙胺和三乙胺与臭氧反应的大气寿命. 结果显示, 与臭氧的反应是二乙胺和三乙胺在大气中的一种重要的消除途径, 尤其是在污染严重地区.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.