Synthesis and Characterization of Ferrocene Derived Cyclic Carbaphosphazenes

Dialkylamino substituted cyclic carbaphosphazenes, (R 2 NCN) 2 (NPCl 2 ) were prepared and reacted with the ferrocene derived hydroxymethyl phosphine sulfide FcCH(CH 3 )P(S)(CH 2 OH) 2 after dilithiation to yield a series of new spirocyclic derivatives of cyclic carbaphosphazenes having ferrocenyl pendant groups. To confirm the formation of six membered spirocycles and to compare their spectral features, transesterification reactions of FcCH(CH 3 )P(S)(CH 2 OH) 2 also were carried out with P(NR 2 ) 3 , yielding the six membered heterocycles FcCH 2 P(S)(CH 2 O) 2 PNR 2 (R = Me, Et). The compounds were characterized by 1 H, 31 P, 13 C NMR, mass spectra, and elemental analysis.     

Parallel Detection of Different DNA Sequences on One Gold Electrode

Motivated by the potential of electrochemical techniques to analyze hybridization events fast and in a simple and cost‐effective way we present here a detection system allowing a parallel electrochemical DNA analysis. For this purpose different probe DNA strands have been immobilized on one electrode. By the use of two different target DNA sequences, both marked with the redox active methylene blue, we can show that hybridization with the complementary probe sh“NA strands can occur without steric hindrance. Each target has been recognized down to 3nM with a very high specificity of the sensor. In addition, we can detect two different ssDNA targets labeled with different redox active molecules, methylene blue and ferrocene, on one sensor surface simultaneously.     

Transition‐Metal Complexes Based on the 1,3,5‐Triethynyl Benzene Linking Unit

The synthesis of a unique series of heteromultinuclear transition metal compounds is reported. Complexes 1‐I‐3‐Br‐5‐(FcC≡C)‐C₆H₃ ( 4 ), 1‐Br‐3‐(bpy‐C≡C)‐5‐(FcC≡C)‐C₆H₃ ( 6 ), 1,3‐(bpy‐C≡C)₂‐5‐(FcC≡C)‐C₆H₃ ( 7 ), 1‐(XC≡C)‐3‐(bpy‐C≡C)‐5‐(FcC≡C)‐C₆H₃ ( 8 , X = SiMe₃; 9 , X = H), 1‐(HC≡C)‐3‐[(CO)₃ClRe(bpy‐C≡C)]‐5‐(FcC≡C)‐C₆H₃ ( 11 ), 1‐[(Ph₃P)AuC≡C]‐3‐[(CO)₃ClRe(bpy‐C≡C)]‐5‐(FcC≡C)‐C₆H₃ ( 13 ), 1‐[(Ph₃P)AuC≡C]‐3‐(bpy‐C≡C)‐5‐(FcC≡C)‐C₆H₃ ( 14 ), [1‐[(Ph₃PAuC≡C]‐3‐[{[Ti](C≡CSiMe₃)₂}Cu(bpy‐C≡C)]‐5‐(FcC≡C)‐C₆H₃]PF₆ ( 16 ), and [1,3‐[(tBu₂bpy)₂Ru(bpy‐C≡C)]₂‐5‐(FcC≡C)‐C₆H₃](PF₆)₄ ( 18 ) (Fc = (η⁵‐C₅H₄)(η⁵‐C₅H₅)Fe, bpy = 2,2′‐bipyridiyl‐5‐yl, [Ti] = (η⁵‐C₅H₄SiMe₃)₂Ti) were prepared by using consecutive synthesis methodologies including metathesis, desilylation, dehydrohalogenation, and carbon–carbon cross‐coupling reactions. In these complexes the corresponding metal atoms are connected by carbon‐rich bridging units comprising 1,3‐diethynyl‐, 1,3,5‐triethynylbenzene and bipyridyl units. They were characterized by elemental analysis, IR and NMR spectroscopy, and partly by ESI‐TOF mass spectrometry., The structures of 4 and 11 in the solid state are reported. Both molecules are characterized by the central benzene core bridging the individual transition metal complex fragments. The corresponding acetylide entities are, as typical, found in a linear arrangement with representative M–C, C–C_C≡C and C≡C bond lengths.     

Synthesis and complexation properties of novel triazoyl-based ferrocenyl ligands

Two new ligand derivatives of ferrocene, namely N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl]ferrocene carbimine (L1) and N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl]ferrocene carbamide (L2), were synthesised in good yields by reacting the known compound 3,5-di-pyridine-2-yl-[1,2,4]triazol-4-ylamine (1) with ferrocenecarbaldehyde and chlorocarbonyl ferrocene, respectively. The structures of L1 and L2 were determined by X-ray crystallography. The complexation of L1 and L2 with Cu^I, Ag^I, Zn^II and Cd^II was studied by NMR and UV-vis spectroscopies, as well as by electrochemistry, with titrations used to determine metal:ligand stoichiometries. The cyclic voltammograms of L1 and L2 and their respective complexes indicated reversible one-electron transfers corresponding to the Fc^0/+ redox couple (Fc = ferrocene), with formal electrode potentials shifting to more positive values upon metal complexation.     

Stille Cross‐Coupling of a Racemic Planar‐Chiral Ferrocene and Crystallographic Trace Analysis of Catalysis Intermediates and By‐products

A pressure‐controlled procedure for the S_N1 reaction of rac‐1‐[(dimethylamino)methyl]‐2‐(tributylstannyl)ferrocene ( 1 ) to rac‐1‐(phthalimidomethyl)‐2‐(tributylstannyl)ferrocene ( 2 ) was developed. Pd⁰‐Catalyzed Stille coupling of 2 with iodobenzene afforded rac‐1‐phenyl‐2‐(N‐phthalimidomethyl)ferrocene ( 5 ) in 74% yield; after trace enrichment by crystallization of the combined mother liquors, one single crystal of each, 5 , catalysis intermediate trans‐iodo(σ‐phenyl)bis(triphenylarsino)palladium(II) ( 7 ), trans‐diiodobis(triphenylarsino)palladium(II) ( 8 ), and rac‐2,2′‐bis(phthalimidomethyl)‐1,1′‐biferrocene ( 9 ) could be isolated by crystal sorting under a microscope and characterized by X‐ray crystal structure analysis. Furthermore, 5 was deprotected to amine ( 11 ), which does even survive the Birch reduction to rac‐1‐(aminomethyl)‐2‐(cyclohexa‐2,5‐dienyl)ferrocene ( 12 ).     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Novel electrochemical synthesis and characterisation of poly(methyl vinylsilane) and its co-polymers

The electrochemical synthesis and characterisation of poly(methyl vinylsilane) and a series of poly(methyl vinylsilane-co-metallocenes) network polymers are described in detail. This class of polymers are not accessible through Wurtz coupling reaction and are however prepared by electro-reduction of dichloro methyl vinylsilane in a non-aqueous system using aluminum electrodes in a single compartment cell. These polymers have been characterised using UV, FTIR, XRD, SEM and NMR spectral techniques. Cyclic voltammetric studies of the above polymers reveal their conducting behavior. These polymers show optical properties as explained from the results. Polymers of this type are proposed as potential soluble precursors for SiC and metal doped SiC materials.     

Synthesis and structural characterization of ferrocene-based bis(pyrazol-1-yl)borate ligands: FcB(Me)pz2K, Fc2Bpz2K, and 1,1′-fc[B(Me)pz2]2K2 (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl)

Reaction of the ferrocenyl(dimethylamino)boranes FcB(Me)NMe₂, Fc₂BNMe₂, and 1,1′-fc[B(Me)NMe₂]₂ with 1:1 mixtures of pyrazole and potassium pyrazolide in refluxing THF gave the potassium salts of the ferrocene-based bis(pyrazol-1-yl)borate ligands FcB(Me)pz₂K, Fc₂Bpz₂K, and 1,1′-fc[B(Me)pz₂]₂K₂ in good yield (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl). In the solid state, FcB(Me)pz₂K and Fc₂Bpz₂K form centrosymmetric dimers with short K?Cp contacts suggesting an η⁵ coordination mode of the potassium ion. The crystal lattice of the ditopic ligand 1,1′-fc[B(Me)pz₂]₂K₂ consists of coordination polymer strands featuring essentially the same structural motif that has been observed for the monotopic derivatives. All three scorpionate ligands are thus promising building blocks for the preparation of ferrocene-containing multiple-decker sandwich complexes.     

单体摩尔比对共聚物电化学及电致变色性质的影响

通过电化学聚合法制备了3, 6-(二噻吩基)-9-(二茂铁甲酸己酯基)-咔唑(BTC-H-Fc)与3, 4-乙烯二氧噻吩(EDOT)不同摩尔比下的共聚物,并运用电化学、傅里叶变换红外(FT-IR)光谱及光谱电化学对其结构与性能进行了表征。研究结果表明所得共聚物均能显示良好的电化学特性,光谱电化学测试结果表明,当摩尔浓度比为1时, P(BTC-H-Fc:EDOT)-1中性态下表现浅绿色,且随着施加电压增加转变为绿色和紫色; P(BTC-H-Fc:EDOT)-4则显示了最丰富的颜色,可在中性态的红褐色、棕黄色、绿色、蓝色和紫色五种颜色之间可逆变换;当摩尔比继续增加时, P(BTC-H-Fc:EDOT)-8可以显示红褐色、灰黑色、蓝绿色和天空蓝四种颜色。另外,三种摩尔比的聚合物薄膜还具有不错的光学对比度,转换响应时间及着色效率,该性能为其在电致变色器件的应用提供了潜力。