微重力环境下Marangoni对流的有限元数值模拟

本文以悬浮区为背景研究液桥中气液交界面上由表面张力所驱动的流体对流。我们采用有限元方法对轴对称、定常运动方程,能量方程,自由面切向、法向应力平衡条件迭代求解,首次考虑了边界形状的影响,得到了自洽的流区位形和流场、温度场、表面压强分布。一般说来,流区自由面呈弯月形。结果表明,只要表面张力数 C_a<1,静态平衡的流区位形就是动态情况的良好近似。本文还分析了C_a数及G_r 数对流区位形的影响,得到了不同 M_a 数及散热条件下的温度场和流函数分布。     

应用浮动冲击平台考核舰载设备响应分析

为研究安装甲板模拟器的浮动冲击平台系统考核舰载设备的机理,对整个系统建立有限元模型进行数值模拟并建立力学模型进行了理论分析。根据船体甲板结构产生的垂向低通滤波特性,提出甲板模拟器具有减缓高频冲击并满足设备安装频率要求的作用。将被试设备的浮动冲击平台考核系统简化为有阻尼的三自由度系统强迫振动模型,通过拉普拉斯变换方法求解了不同冲击环境下被试设备的响应。数值模拟与理论计算结果比较吻合,被试设备响应迅速达到峰值后逐渐衰减,振动频率由高频向低频过渡,在分析浮动冲击平台舰载设备考核系统长时间响应时需考虑阻尼的影响。

     

周期分布缺陷对韧性材料高应变率拉伸碎裂过程的影响

为研究初始缺陷对材料高应变率碎裂过程的影响,采用有限元方法模拟了具有周期性几何缺陷的韧性金属圆杆在高应变率拉伸过程中的碎裂现象。模拟结果表明:(1)与无初始缺陷的韧性杆件相比,具有一定幅值的初始缺陷的杆件在同等拉伸速度下发生断(碎)裂的时刻一般提前;(2)初始缺陷对碎片的尺寸和大小分布影响明显,在一定的应变率范围内,周期性缺陷完全控制了韧性材料碎裂过程中产生碎片的个数,可称这个碎裂过程为缺陷控制碎裂;(3)改变初始缺陷的空间间距和幅值,出现缺陷控制碎裂的应变率窗口将发生明显变化。进一步讨论了具有2种幅值的复合缺陷对拉伸碎裂过程的影响。     

Projection 2 Goes Turbulent - and Fully Implicit

We describe and demonstrate both our newest projection method (fully implicit) for the incompressible Navier-Stokes equations via the finite element method and our newest turbulence model - a somewhat sophisticated nonlinear (cubic) eddy viscosity model that does not employ wall functions or normal distances to walls - the combination providing a method and a model that is each applicable in arbitrary geometry. We demonstrate both via a flow simulation past an automobile-like body at a Reynolds number of 4.3 million.     

机械密封焊接金属波纹管膜片结构的有限元分析

在Linux操作平台下应用FAST_wmg有限元前后处理软件对机械密封焊接金属波纹管膜片建立了有限元模型并进行了非线性有限元分析．在同等条件下对焊接金属波纹管采用了S型膜片和V型膜片，并分别进行了有限元强度评价和对比分析．结果表明，两种膜片最大应力集中都在膜片两端周围发生．这与文献所叙述的波纹管的主要失效发生在膜片两端与焊谷接近的部位非常吻合，但是，在同样边界条件下，在同样位移量时S型膜片最大应力值比V型膜片最大应力值小，压缩量大．     

Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material

Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto–plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening.     

A symmetric BEM–FEM method for an axisymmetric eddy current problem

This paper deals with the numerical solution of the time-harmonic eddy current model in an axisymmetric unbounded domain. To this end, a new symmetric BEM–FEM formulation is derived and also analyzed. Moreover, error estimates for the corresponding discretization are proven.     

Time-harmonic acoustic propagation in the presence of a shear flow

This work deals with the numerical simulation, by means of a finite element method, of the time-harmonic propagation of acoustic waves in a moving fluid, using the Galbrun equation instead of the classical linearized Euler equations. This work extends a previous study in the case of a uniform flow to the case of a shear flow. The additional difficulty comes from the interaction between the propagation of acoustic waves and the convection of vortices by the fluid. We have developed a numerical method based on the regularization of the equation which takes these two phenomena into account. Since it leads to a partially full matrix, we use an iterative algorithm to solve the linear system.     

BELENE nuclear power plant numerical and experimental bedrock,layers and surface signals

An investigation of BELENE Nuclear Power Plant (NPP) free field signal is presented in the current study. An SH wave propagation trough multilayer geological media in the region is considered. An original structural model of the geological column has been developed. The investigated layers are isotropic, with constant depth and skyline parallel. The SH rays are with an arbitrary angle as far as the layers are concerned. The seismic SH waves have been generated by a special detonation device. The main results of the study are graphically illustrated. A comparison between the original BELENE NPP experimental and the numerical surface (free field) signals (obtained by the formulated direct problem) for the investigated geological column has been carried out and its results are hereby shown.