Molecular Simulation on Competitive Adsorption Differences of Gas with Different Pore Sizes in Coal

Micropores are the primary sites for methane occurrence in coal. Studying the regularity of methane occurrence in micropores is significant for targeted displacement and other yield-increasing measures in the future. This study used simplified graphene sheets as pore walls to construct coal-structural models with pore sizes of 1 nm, 2 nm, and 4 nm. Based on the Grand Canonical Monte Carlo (GCMC) and molecular dynamics theory, we simulated the adsorption characteristics of methane in pores of different sizes. The results showed that the adsorption capacity was positively correlated with the pore size for pure gas adsorption. The adsorption capacity increased with pressure and pore size for competitive adsorption of binary mixtures in pores. As the average isosteric heat decreased, the interaction between the gas and the pore wall weakened, and the desorption amount of CH₄ decreased. In ultramicropores, the high concentration of CO₂ (50–70%) is more conducive to CH₄ desorption; however, when the CO₂ concentration is greater than 70%, the corresponding CH₄ adsorption amount is meager, and the selected adsorption coefficient S_CO2/CH4 is small. Therefore, to achieve effective desorption of methane in coal micropores, relatively low pressure (4–6 MPa) and a relatively low CO₂ concentration (50–70%) should be selected in the process of increasing methane production by CO₂ injection in later stages. These research results provide theoretical support for gas injection to promote CH₄ desorption in coal pores and to increase yield.     

Characterization and Valorization of the Agricultural Waste Obtained from Lavandula Steam Distillation for Its Reuse in the Food and Pharmaceutical Fields

The main focus of the current research was the characterization of the by-products from the steam distillation of Lavandula angustifolia Mill. (LA) and Lavandula x intermedia Emeric ex Loisel (LI) aerial parts, as they are important sources of bioactive compounds suitable for several applications in the food, cosmetic, and pharmaceutical industries. The oil-exhausted biomasses were extracted and the total polyphenol and flavonoid contents were, respectively, 19.22 ± 4.16 and 1.56 ± 0.21 mg/g for LA extract and 17.06 ± 3.31 and 1.41 ± 0.10 mg/g for LI extract. The qualitative analysis by liquid chromatography-electrospray tandem mass spectrometry (HPLC-ESI-MS) revealed that both the extracts were rich in phenolic acids and glycosylated flavonoids. The extracts exhibited radical scavenging, chelating, reducing activities, and inhibitory capacities on acetylcholinesterase and tyrosinase. The IC50 values against acetylcholinesterase and tyrosinase were, respectively, 5.35 ± 0.47 and 5.26 ± 0.02 mg/mL for LA, and 6.67 ± 0.12 and 6.56 ± 0.16 mg/mL for LI extracts. In conclusion, the oil-exhausted biomasses demonstrated to represent important sources of bioactive compounds, suitable for several applications in the food, cosmetic, and pharmaceutical industries.     

Macro-Reticular Ion Exchange Resins for Recovery of Direct Dyes from Spent Dyeing and Soaping Liquors

Dyes are a major class of organic pollutants that are well-known for their harmful impact on aquatic life and humans. Several new strategies for removing colours from industrial and residential effluents have recently emerged, with adsorption being the best option. The current study looked at the recovery of direct dyes from aqueous streams for reuse using macro-reticular ion exchange resins (IERs). The investigation includes dyeing single jersey cotton grey textiles with direct dyes from the Isma dye Company in Kafr El Dawar, Egypt. After centrifuging and separating the supernatant liquid, solutions from thirteen different dyes, produced at an average concentration between the wasted and soaping liquor concentrations, were calculated spectrophotometrically from the first dyeing trials. Kinetic data were well fitted with pseudo-second-order rate kinetics. The amounts of dye retained by the anion exchangers increased with a rise in temperature in the case of Strong Base Resin (SBR) and vice versa for Weak Base Resin (WBR). Batch adsorption experiments with SBR and WBR were conducted for each dye, and both Freundlich and Langmuir isotherms were constructed. It was found that adsorption obeyed both isotherms, that monolayer adsorption took place, and that the dye molecular weight, structure, and solubility, as well as the type of anionic resin used, had varying effects on the extent of absorption. The monolayer sorption capacities Q₀ determined from the Langmuir isotherm model for the strongly and weakly basic anion exchangers were found to be 537.6 and 692 mg/g for Direct Yellow RL, respectively. As a result, Yellow RL exhibited the greatest adsorption on both SBR and WBR. Orange GRLL, Blue 3B, and Congo Red, on the other hand, were the poorest colours absorbed by the IERs, whereas Blue RL demonstrated good adsorption by SBR and accelerated adsorption by WBR. Most of the dyes may be recovered and reused in this manner.     

多层网络级联失效的预防和恢复策略概述

现实生活中,与国计民生密切相关的基础设施网络大多不是独立存在的,而是彼此之间相互联系或依赖的,于是用于研究这些系统的多层网络模型随之产生.多层网络中的节点在失效或者遭受攻击后会因"层内"和"层间"的相互作用而产生级联效应,从而使得失效能够在网络层内和层间反复传播并使得失效规模逐步放大.因此,多层网络比单个网络更加脆弱.多层网络级联失效产生的影响和损失往往是非常巨大的,所以对多层网络级联失效的预防和恢复的研究具有重大意义.就多层网络级联失效的预防而言,主要包含故障检测,保护重要节点,改变网络耦合机制和节点备份等策略.就多层网络发生级联失效后的恢复策略而言,主要包含共同边界节点恢复、空闲连边恢复、加边恢复、重要节点优先恢复、更改拓扑结构、局域攻击修复、自适应边修复等策略.     

Superhydrophobic MoS2-based multifunctional sponge for recovery and detection of spilled oil

Oil spills are a major threat to the marine ecosystem, requiring immediate solutions to remove spilled oil from oceanic environments. In this study, we report a superhydrophobic molybdenum disulfide (MoS₂) coated polydimethylsiloxane (PDMS) sponge and demonstrate its high proficiency in spilled oil recovery and oil spill detection based on oil-water separation ability. This novel oil sorbent is fabricated by a simple dip-coating to incorporate MoS₂ flakes into PDMS sponge. The optimized MoS₂-sponge displays a water contact angle of >152°, demonstrating excellent superhydrophobicity and high oil absorption (>97 wt%) for a variety of oils, including vegetable oil and fuel waste. Moreover, the material retains excellent oil absorption capability upon repetitive compression cycles. The versatility of this novel sorbent has been extended for the real-time spontaneous detection of oils by taking advantage of electrically conductive MoS₂ layers.     

超临界水驱超稠油提高采收率热物理特性研究

超稠油资源的高效开发对于提高石油供给和保障我国石油安全意义重大。针对深层超稠油资源由于原始地层压力高、原油黏度大导致常规蒸汽驱无法有效开发的问题,本文提出超临界水驱开发深层超稠油的新思路。本文首先研制了超临界水驱油提高采收率实验平台,研发的管式填砂岩心模型能够模拟岩心升温和驱替的同步过程,然后开展了超临界水驱、蒸汽驱和热水驱对比实验研究,实验结果表明,相对于蒸汽驱,超临界水驱能显著提高采收率并具有更高的热效率,25MPa、400℃超临界水驱鲁克沁超稠油的采收率达到97.07%;获得了超临界水驱过程的温度场和驱替压差变化规律,发现了超临界水超覆现象,与蒸汽超覆相比,超临界水超覆发生晚且持续短,可扩大波及范围,提高采收率。     

磷钼杂多化合物脱硫热力学可行性与硫磺生成机理研究

长期以来杂多化合物一直被用作特定反应的催化剂 ,尚无直接利用其氧化还原性能进行污染物治理研究的先例 [1] .由于磷和钼在我国均为丰产元素 ,相应的杂多化合物又具有稳定的化学性能 ,寻找其新的应用领域无疑具有特别重要的意义 .本文对与此相关的脱硫热力学可行性与硫磺生成机理问题进行研究 ,以期为应用开发奠定理论基础 .1　实验部分1 .1　仪器和试剂　 31 4型硫离子选择电极 (江苏电分析仪器厂 ) ;DSC- 7型微分量热仪 (美国 Perkin-Elmer公司 ) ;Finber 1 0 0 0型能谱分析仪 (配置 Pioneer KYKY2 80 0型扫描电镜 ) ;UJ33a型电位…     

驱油用聚丙烯酰胺分子量测试的光散射研究

利用旋转流变仪分析了超高分子量部分水解聚丙烯酰胺溶液的流变性质,并根据光散射动态模式分析了其在不同浓度和不同盐离子浓度下的尺寸分布.建立了利用多角度激光光散射准确测量驱油用超高分子量聚丙烯酰胺重均分子量(Mw)、均方根回转半径()和第二位力系数值(A2)的方法.准确测量了商品化驱油用超高分子量聚丙烯酰胺FP3630S的这3个参数,分别为Mw=(1.33±0.06)×107,     

仪器定量分析中几个问题的探讨

详细介绍了分析方法的评价指标,包括检出限、测定限、灵敏度、精密度、准确度、动态范围和线性范围、抗干扰能力等,单因素优化方法与加标回收实验评定测定结果准确度的可靠性,并就分析工作中遇到的一些实际问题进行了讨论.     

脱硫脱硝后V2O5/AC在含NH3气氛中的再生及硫资源化的耦合过程研究

V2O5/AC具有很好的烟气同时脱硫脱硝能力,脱硫过程包括其对烟气中SO2的吸附、吸附饱和后SO2从其上的脱附（再生）及脱附出SO2的资源化。考察了同时脱硫脱硝后的V2O5/AC在含NH3气氛中的再生和硫资源化的耦合过程。研究了NH3注入量、再生温度、再生时间和尾气循环流量对再生效率、硫回收率及二次脱硫脱硝活性的影响。结果表明,再生温度和再生时间主要影响SO2的脱附,因而影响再生效率和二次脱硫脱硝活性;NH3注入量不影响SO2的脱附,但明显影响硫回收率和二次脱硫脱硝活性;尾气循环模式是提高硫回收率的重要方法,但在研究的条件下循环流量对再生效率、硫回收率和二次脱硫脱硝活性的影响不大。