Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.     

Thermochemistry of aromatic ketones. Experimental enthalpies of formation and structural effects

The standard enthalpies of formation Δ_fH^o (liq. or cr.) at the temperature T = 298.15 K were measured using combustion calorimetry for benzophenone (A), 1-indanone (B), -tetralone (C), 9-fluorenone (D), anthrone (E) and dibenzosuberone (F). The standard enthalpies of vaporization Δ_vH^o or sublimation Δ_sH^o of A-F and 5,7-dihydro-6H-dibenzo[a,c]cyclohepten-6-one (G) were obtained from the temperature function of the vapor pressure measured in a flow system. Enthalpies of fusion Δ_mH of solid compounds were measured by DSC. From the enthalpies of formation of the gaseous compounds of A-G the values of their strain enthalpies were derived and structural effects discussed.

     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Recovery of pyridine from aqueous solution by membrane pervaporation

Three different membranes, based on poly(dimethylsiloxane) (PDMS), cation-exchange material and poly(vinyl alcohol) (PVA) respectively, were tudied for the separation of pyridine-water mixtures by pervaporation. The PDMS membrane was preferentially permeable to pyridine and the other two were selective towards water. Three membranes showed different permeation performance, allowing the application of the technique to the separation of feeds of different composition. The temperature profile of the permeability suggests that it is possible to carry out the operation at an elevated temperature in order to achieve high productivity. A combination of the three types of membranes was designed for the production of anhydrous pyridine from dilute pyridine aqueous solution by pervaporation.     

<Emphasis Type="Italic">L</Emphasis>-Carnitine Supplementation: A New Paradigm for its Role in Exercise

Summary. Early research investigating the effects of L-carnitine supplementation has examined its role in substrate metabolism and in acute exercise performance. These studies have yielded equivocal findings, partially due to difficulties in increasing muscle carnitine concentrations. However, recent studies have proposed that L-carnitine may play a different role in exercise physiology, and preliminary results have been encouraging. Current investigations have theorized that L-carnitine supplementation facilitates exercise recovery. Proposed mechanism is as follows: 1) increased serum carnitine concentration enhances capillary endothelial function; 2) increased blood flow and reduced hypoxia mitigate the cascade of ensuing, destructive chemical events following exercise; 3) thus allowing reduced structural damage of skeletal muscle mediated by more intact receptors in muscle needed for improved protein signaling. This paradigm explains decreased markers of purine catabolism, free radical formation, and muscle tissue disruption after resistance exercise and the increased repair of muscle proteins following long-term L-carnitine supplementation.     

氯化钙/水-醇溶液稀释热

电解质溶液稀释热是溶液的重要热性质之一．由它可计算不同浓度下电解质的溶解热、表现相对摩尔焓、溶液中反应热和化合物生成热等．在电解质溶液理论研究中，稀释热也是重要的基础数据．由稀释热可推算溶液中组分的活度系数、渗透系数、相对偏摩尔焓及表观摩尔热容等[1-3]．在化工生产中，稀释热是化工过程能量计算不可缺少的数据．电解质水溶液稀释热已有不少研究[2，4]．但电解质混合溶剂体系稀释热报导甚少．随着加盐精馏技术、海水淡化技术等研究的进展，急需这方面数据．本文作者已报告了CaCl2／C2H5OH－H2O体系[5]和CaCl2／n－C…     

Integrated production of ethanol fuel and protein from Coastal Bermudagrass

The herbaceous crops that may provide fermentable carbohydrates for production of fuels and chemicals also contain 10–20% protein. Protein coproduction with biomass-derived fuels and chemicals has important advantages: (1) food and fuel production can be integrated, and (2) protein is a high-value product that may significantly improve overall process economics. We report the results of an integrated approach to producing protein and fermentable sugars from one herbaceous species, Coastal Bermudagrass (CBG). The ammonia fiber explosion (AFEX) process makes possible over 90% conversion of cellulose and hemicellulose to simple sugars (about 650 mg reducing sugars/g dry CBG) at 5 IU cellulase/g vs < 20% conversion for untreated CBG. The AFEX treatment also improves protein extraction from CBG; over 80% protein recovery is possible from AFEX-treated CBG vs about 30% recovery from untreated CBG.     

Thermochemical study of aliphatic and phenyl-substituted geminal diacetates

The standard enthalpies of combustion _c H ^o of aliphatic diacetates1 and aromatic diacetates2 were measured calorimetrically. The enthalpies of vaporization _vap H ^o or sublimation _sub H ^o of1 and2 were obtained from the temperature function of the vapor pressure measured in a flow system. From _f H ^o(g) of1 and2 new values of group increments for the estimation of standard enthalpies of formation of these classes of compounds were derived. The geminal interaction energy between the geminal acyloxy groups shows no anomeric stabilization.Geminal Substituent Effects, Part 12, for part 11 see Ref. 7.     

Molar enthalpies of transfer of divalent transition metal lons and their chloro complexes from N,N-dimethylformamide to N,N-dimethylacetamide

The molar enthalpies of transfer _t H ^° of some divalent metal ions (M-Mn, Co, Ni and Zn) and their chloro complexes from N,N-dimethyl-for-mamide (DMF) to N,N-dimethylacetamide (DMA) have been determined using the tetraphenylarsonium-tetraphenylborate (TATB) assumption at 25°C. Although physicochemical properties of DMF and DMA as solvent are similar, the _t H ^°(M ²⁺) value increased significantly in the order Mnt H ^° values for the mono-and dichloro complexes showed also a strong metal dependence, while those for the triand tetrachloro complexes practically do not. These results can be reasonably explained in terms of steric hindrance upon solvation of the metal ions and complexes in DMA.