Phase formation and magnetic anomalies in RuSr2RECu2O8 (RE=Eu, Gd, Ho) samples

We have synthesized bulk RuSr₂RECu₂O₈ (RE=Eu, Gd and Ho) compounds using the ammonium nitrate melt technique. The phase purity of the samples decreases as the ionic radii of the RE element decreases. For RE=Ho, magnetic Sr₂HoRuO₆ and CuO were formed instead of the 1212 phase. The magnetization vs. temperature curves of the samples are similar to those of the samples prepared using the solid-state reaction method. The magnetic anomalies observed in M-T curves are discussed.     

Effects of sintering temperature and atmosphere on magnetism in Mn-doped TiO2 bulk samples

Magnetic properties have been investigated on Mn doped TiO₂(Ti_0.98Mn_0.02O₂) bulk samples prepared by solid state reaction, which were sintered at different temperature ranging from 450 ^°C to 900 ^°C in air and argon atmosphere, respectively. The results show that the magnetic properties were strongly dependent on the sintering temperature and atmosphere. For samples sintered in air, the magnetization initially increase with the increase of sintering temperature up to 600 ^°C and thereafter it decrease. While the magnetization of samples sintered in argon atmosphere decreases monotonically with the increase of sintering temperature. Furthermore, for samples sintered at 600 ^°C in air, the magnetic susceptibility exhibits a dominant Curie-Weiss behaviour and no magnetic transition is observed over the temperature range from 10 to 300 K. In contrast, for samples sintered in argon atmosphere, besides the magnetic transition near 45 K perhaps caused by Mn₃O₄, another magnetic transition appears near room temperature.     

Room temperature ferromagnetism and magnetotransport properties of the layered manganite system La1.2Ba1.8Mn2−xRuxO7 (0≤x≤1.0)

The dc magnetization and ac susceptibility measurements on two dimensional layered manganite La_1.2Ba_1.8Mn₂O₇ samples reveal the occurrence of ferromagnetism above room temperature with ferromagnetic (FM) to paramagnetic (PM) transitions at 338 K. The bifurcation temperatures shown by the zero-field cooled (ZFC) and field cooled (FC) dc magnetization curves at high temperatures shift towards lower temperatures as the applied field is increased from 100 to 2500 Oe. The data are suggestive of a large magnetic anisotropy due to the strong competing ferromagnetic and antiferromagnetic interactions resulting in a spin-glass-like state. Ru doping is found to enhance the ferromagnetism and metallicity of the system in a remarkable way. The magnetoresistance (MR) values obtained are very high and about 40% even at 260 K for the undoped sample.     

First principles analysis of the MgAl2O4:Ni absorption spectrum

Analysis of the energy-level scheme and absorption spectrum of the Ni²⁺ ion in MgAl₂O₄ was performed. The recently developed first-principles approach to the analysis of the absorption spectra of impurity ions in crystals based on the discrete variational multi-electron (DV-ME) method [K. Ogasawara, et al., Phys. Rev. B 64 (2001) 115413) was used in the calculations. The method is based on the numerical solution of the Dirac equation; no phenomenological parameters are used in the calculations. As a result, complete energy-level scheme of Ni²⁺ and its absorption spectra were calculated, assigned and compared with experimental data on the ground and excited state absorption spectra. Numerical contributions of all possible electron configurations into the calculated energy states were determined. By performing analysis of the molecular orbitals population, numerical contributions of the oxygen 2p- and 2s-orbitals into the 3d molecular orbitals were determined.     

Comparison of engineering methods of loss prediction in thin ferromagnetic laminations

The loss predictive methods based on the static and dynamic components of power loss are compared with the methods where the total loss is subdivided into hysteresis, classical and excess components. It is explained why the simplest two-component methods can be preferable. An approach to the characterization of a given steel is outlined.     

Measurements of residual stress in semi-insulating GaAs by Cr-related luminescence lines

We have measured systematically the Cr-related zero-phonon lines in the 0.839 eV region in a series of plastically-bent semi-insulating GaAs:Cr with compressive or tensile stress along various bending axes. As a result, it has been found that the residual stress in semi-insulating GaAs:Cr wafers can be sensitively characterized from a splitting and energy shift of the 0.839 eV Cr-related luminescence lines in the low-temperature photoluminescence spectra. Furthermore, we have applied this method to the characterization of the interface stress of OMVPE-grown ZnSe/GaAs:Cr heterostructure and found that anomalous stress exists at the ZnSe/GaAs interface, which is inconsistent with stress predicted by the lattice mismatch of the heterojunctions.     

Magnetic circuit of a contactless torque sensor for electric power steering

Modern passenger cars are increasingly equipped with electromechanical steering assist rather than hydraulic systems known for many decades. Major benefits are reduced fuel consumption (up to 0.2l/100 km) and increased functionality. As such a system reacts to the drivers input in terms of steering torque or steering effort, a sensor is required that accurately measures the steering torque. Valeo has adopted a magnetic technology and has improved the performance by adding specially designed flux concentration devices. The magnetic circuit consists of a multi-pole ring magnet and a pair of ring-shaped soft magnetic parts rotating together with the steering shaft and an additional pair of soft magnetic flux concentration devices which are fixed stationary inside the housing. The steering torque causes a relative twist between magnet and the soft magnetic rings, therefore implementing a proportional magnetisation of the latter. A U-shape was chosen for the flux concentration devices in order to compensate mechanical tolerances of the system. The main focus of this paper will be on the tolerance behaviour of the sensor system and the impact of the flux concentration devices. Because of the nonlinear nature of the magnetisation curve of the NiFe alloy used extensive 3D FEM simulation was necessary. Simulation enables us to have a look inside the soft magnetic material and predict the spatial magnetisation distribution with the benefit of avoiding saturation. The result is an optimised sensor, which meets both the harsh environmental conditions inside the motor compartment as well as the cost pressure in the automotive business.     

Spin-orbit gauge and quantum spin Hall effect

We have shown that the non-Abelian spin-orbit gauge field strength of the Rashba and Dresselhaus interactions, when split into two Abelian field strengths, the Hamiltonian of the system can be re-expressed as a Landau level problem with a particular relation between the two coupling parameters. The quantum levels are created with up and down spins with opposite chirality and leads to the quantum spin Hall effect.     

Spatial inhomogeneity of the interaction between bistable ferromagnetic wires

An experimental study and a theoretical calculation are presented of the hysteresis loop of two bistable ferromagnetic wires. A new effect—an asymmetry of the shift of the switching field at the first and the second Barkhausen jump—is found experimentally. The effect is explained as a consequence of the spatial dependence of the stray field. It is also reproduced within our recent calculation of the stray field from the magnetisation profile. Theoretical results qualitatively agree with the experimental data.     

Transmission X-ray microscopy using X-ray magnetic circular dichroism

X-ray magnetic circular dichroism (X-MCD) was used as a large, element-specific and quantitative magnetic contrast mechanism in the soft X-ray microscopes at BESSY I (Berlin) and the ALS (Berkeley). The present state and potential of magnetic transmission X-ray microscopy (MTXM) is outlined. The possibility to record images in varying magnetic fields and the high spatial resolution down to 25 nm were used to image out-of-plane magnetized (4 ?Fe / 4 ?Gd)×75 systems. Magnetic domains could be studied in arrays of circular and square dots with lateral dimensions down to 180 nm. Hysteresis loops of individual dots were deduced using the direct proportionality of the X-MCD contrast to the sample magnetization. Images of a 3 nmCr / 50 nmFe / 6 nmCr film demonstrate for the first time that MTXM is also able to observe in-plane magnetized domains. In the future the possible applications of MTXM will be extended with regard to the strength of the external field, the available energy range and the sample conditions by building a dedicated transmission X-ray microscope for magnetic imaging at BESSY II. Received: 22 May 2001 / Accepted: 4 July 2001 / Published online: 5 October 2001