二元合金多晶粒的枝晶生长的等温相场模型

基于Ginzburg-Landau理论和单晶粒的枝晶生长模型，发展了一个单相场控制的多个晶粒的枝晶生长模型. 采用相场和溶质场耦合的方法，以Al-2%Cu合金为例模拟了二元合金等温凝固过程中多个晶粒的生长过程. 结果表明，这个模型的计算结果展现了多个晶粒枝晶的竞争生长，能较真实的再现凝固过程中的枝晶的生长过程.     

A photonic wire-based directional coupler based on SOI

A photonic wire-based directional coupler based on SOI was fabricated by e-beam lithography (EBL) and the inductively coupled plasma (ICP) etching method. The size of the sub-micron waveguide is 0.34 μm × 0.34 μm, and the length in the coupling region and the separation between the two parallel waveguides are 410 and 0.8 μm, respectively. The measurement results are in good agreement with the results simulated by 3D finite-difference time-domain method. The transmission power from two output ports changed reciprocally with about 23 nm wavelength spacing between the coupled and direct ports. The extinction ratio of the device was between 5 and 10 dB, and the insertion loss of the device in the wavelength range 1520-1610 nm was between 22 and 24 dB, which included an about 18.4 ± 0.4 dB coupling loss between the taper fibers and the polished sides of the device.     

Simulation and optimization of a polymer directional coupler electro-optic switch with push-pull electrodes

Structural model and design technique are proposed for a polymer directional coupler electro-optic switch with rib waveguides and push-pull electrodes, of which the electric field distribution is analyzed by the conformal transforming method and image method. In order to get the minimum mode loss and the minimum switching voltage, the parameters of the waveguide and electrode are optimized, such as the core with, core thickness, buffer layer between the core and the electrode, coupling gap between the waveguides, electrode thickness, electrode width and electrode gap. Switching Characteristics are analyzed, which include the output power, insertion loss, and crosstalk. To realize normal switching function, the fabrication error, spectrum shift, and coupling loss between a single mode fiber (SMF) and the waveguide are discussed. Simulation results show that the coupling length is 3082 μm, push-pull switching voltage is 2.14 V, insertion loss is less than 1.17 dB, and crosstalk is less than −30 dB for the designed device.     

FeSi2合金在高压下的凝固

研究了压力对FeSi2合金凝固组织的影响.与常压下凝固的典型共晶组织不同，高压条件下的凝固组织为初生ε相树枝晶加离异共晶.高压下凝固组织的变化主要是与压力对相图的影响和对凝固过程中溶质原子扩散的影响有关.通过引入压力参量，推导了高压凝固过程中的成分过冷判据，并应用该判据分析了高压凝固树枝晶组织的形成机理. 关键词： 高压 凝固 FeSi2     

Inducing anisotropy in bulk Nd-Fe-Co-Al-B nanocrystalline alloys by quenching in magnetic field

We have observed magnetic anisotropy in bulk Nd_55−xCo_xFe₃₀Al₁₀B₅ (x=10, 15 and 20) alloys prepared by copper mold suction casting method with a presence of external magnetic field (quenching field) μ₀H=0.25 T. By changing direction of the measuring field from perpendicular to parallel one in comparison with that of the quenching field, coercive force of the alloys slightly decreases while remanent magnetization and squareness of hysteresis loop increase more clearly. It is also found that the higher Co-concentration in the alloys the larger magnetic anisotropy is induced. The structure analyses manifest nanocrystalline particles embedded in residual amorphous matrix of the alloys. The size of the particles is in range of 10-30 nm and their crystalline phases consist of Nd₂(Fe,Co)₁₄B, Nd₃Co, Nd₃Al, NdAl₂ and Nd.     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…     

Undercooling and solidification of germanium melts studied by differential scanning calorimeter

~~Undercooling and solidification of germanium melts studied by differential scanning calorimeter~~     

Analysis of Coupling and Radiation Properties for an Improved Dielectric Waveguide Directional Coupler Utilizing a Tapering Left-Handed Slab Core

The coupling and radiation characteristics of an improved dielectric waveguide directional coupler with a tapering left-handed slab core located in the coupling region are analyzed by the staircase approximation method, which combines the building block approach and multi-mode network theory with a rigorous mode-matching procedure. Particular attentions are directed toward the radiation characteristics under different structural parameters of the coupler. Numerical results indicate that the proposed coupler is very promising by shortening the coupling length significantly while keeping the radiation loss at a low level.     

Role of Ag addition in L10 ordering of FePt-based nanocomposite magnets

The FePt system has important perspectives as high-temperature corrosion-resistant magnets. In the form of rapidly solidified melt-spun ribbons, FePt-based magnets may exhibit in certain cases a two-phase hard–soft magnetic behaviour. The present paper deals with a microstructural and magnetic study of FePtAgB alloys with increasing Ag content. The aim is to identify and confirm the effect of Ag addition in decreasing the temperature of the FePt disorder–order structural phase transformation. A detailed high-resolution transmission electron microscopy study is employed, and the alternative disposal of hard and soft regions within the two-phase microstructure is observed and interpreted with respect to the X-ray diffraction results. In the as-cast Ag-containing samples, it is shown that there is an optimum of the Ag content for which best magnetic properties are obtained. Ag addition creates a nonlinear behaviour of the coercive field and the ordering parameter, similar to the RKKY interaction-induced interlayer exchange coupling (IEC) observed in magnetic layers separated by non-magnetic spacer layers. Direct formation of the L1₀ phase from the as-cast state in the FePtAgB alloys is reported with magnetic parameters compatible to other exchange spring permanent nanomagnets. These findings open novel perspectives into utilization of such alloys in applications requiring magnets operating in high-temperature industrial environments.     

Non-steady state solidification of the Nd-123 superconducting oxides

Crystal growth of the melt-textured bulk Nd_1+xBa_2−xCu₃O_6+d (Nd123) superconducting oxides was investigated by employing isothermal undercooling solidification with hot-seeding in air. From the relationship between growth length and holding time, the Nd123 crystal was found to have almost stopped growing after a certain growth period, while the growth length increased proportionally to the holding time at an early stage of the crystal growth. As a result of quantitative analysis for the Nd123 crystal of which solidification was terminated, the distribution of the Nd/Ba substitution was observed to decrease in the Nd123 single crystal matrix from the seed crystal to the edge of the Nd123 crystals. Also, the substitution content at the edge of the Nd123 crystal, which corresponds to that at the final stage of the crystal growth, was found to be in good agreement with the minimum substitution of the Nd123 solid solution phase in the equilibrium phase diagram at this process temperature. These compositional changes could be explained using the equilibrium phase diagram as associated with the solid solution formation, which is responsible for the non-steady state solidification of the Nd123 crystals even for the isothermal undercooling processing.