Elasticity in nanocrystalline Nd2Fe14B+αFe magnetic composites

The dynamic Young modulus (E) of magnetic Nd₂Fe₁₄B+αFe nanocomposites is investigated with mechanical spectroscopy techniques (vibrating reed configuration, f≈1.5 kHz <10⁻⁶). Reduced values of E are obtained (88–152 GPa) as compared with that predicted by the rule of mixtures for the composite (164 GPa). Three contributions to this reduction are briefly discussed: a large volume fraction of the specimen with grain boundary like structure; internal pores, resulting from the high cooling rate during processing (10⁶ K/min) and magneto-mechanical effects. Even when porosity is identified as the principal cause of modulus reduction, magnetic effects are also detected.     

单负材料一维光子晶体的透射谱特性

利用传输矩阵法研究了单负材料一维光子晶体(AB)m(ADBDB)n(AB)mA的透射谱,发现:透射谱中出现2个共振隧穿模,其位置和间距可由周期数m或n,以及介质层厚度d调节控制。改变m,会出现2个恒定间距的共振隧穿模;改变dA,共振隧穿模间距增大,且当dA≥25mm时,间距增大加剧;改变n,共振隧穿模逐渐趋于简并,当n≥6时,两隧穿模合二为一;改变dD,两共振隧穿模亦逐渐趋于简并,当dD≥20mm时,两隧穿模亦合二为一。这些特性可为利用光子晶体设计可调性高品质单通道、双通道滤波器提供参考。     

Lead-free KNLNT piezoelectric ceramics for high-frequency ultrasonic transducer application

This paper presents the latest development of a lead-free piezoelectric ceramic and its application to transducers suitable for high-frequency ultrasonic imaging. A lead-free piezoelectric ceramic with formula of (K_0.5Na_0.5)_0.97Li_0.03(Nb_0.9 Ta_0.1)O₃ (abbreviated as KNLNT-0.03/0.10) was fabricated and characterized. The material was found to have a clamped dielectric constant ε₃₃^S/ε₀ = 890, piezoelectric coefficient d₃₃ = 245 pC/N, electromechanical coupling factor k_t = 0.42 and Curie temperature T_c > 300 °C. High-frequency (40 MHz) ultrasound transducers were successfully fabricated with the lead-free material. A representative lead-free transducer had a bandwidth of 45%, two-way insertion loss of -18 dB. This performance is comparable to reported performances of popular lead-based transducers. The comparison results suggest that the lead-free piezoelectric material may serve as an alternative to lead-based piezoelectric materials for high-frequency ultrasonic transducer applications.     

Wave properties of an annular periodic multilayer structure containing the single-negative materials

The optical properties of an annular periodic multilayer structure containing two kinds of single-negative materials are theoretically investigated based on the transfer matrix method of the cylindrical waves. At the azimuthal mode number m1 and near the magnetic plasma frequency and the electronic plasma frequency for the TE wave and TM wave, respectively, we find that there is an additional high-reflectance band and some reflection dips exist when the plasma frequency is located in the photonic band gap. These two special features arising from the higher order azimuthal mode of the cylindrical waves are not seen in the planar one-dimensional Bragg reflector consisting of the single-negative materials. Such filtering responses provide a feasible way of designing a narrowband resonator without physically introducing any defect layer in the structure.     

聚合物及其混合物的太赫兹介电性质测定与分析方法

聚合物材料因其对太赫兹波的高透过率以及良好的塑形能力在太赫兹研究中扮演了重要的角色,由于材料的介电特性直接关系着折射率、极化率等重要性质,不同的应用场合通常需要材料呈现出特殊的太赫兹介电响应,一方面可以选取不同的聚合物材料,另一方面可以通过多种聚合物的混合实现材料介电性质的调制。聚合物材料合理的选取和设计建立在材料太赫兹介电精确表征之上,然而利用太赫兹时域光谱系统(THz-TDS)对聚合物材料进行透射式太赫兹介电表征时,材料内部空气孔隙的存在会影响表征结果的复现性,同时也会影响共混聚合物介电性质的分析和预测。因此以Landau, Lifshitz, Looyenga(LLL)模型为基础提出了考虑空气影响的介电分析模型,并选取了在太赫兹研究中广泛使用的聚合物材料聚乙烯(PE)和聚四氟乙烯(PTFE)对模型的有效性和稳定性加以验证,展开了两种材料单质和混合物两方面的介电分析。在太赫兹波透射样品之后的相位变化信息中提取出样品的介电常数,同一种物质制备的样片间太赫兹介电谱存在明显差异,使用包含气隙影响的LLL模型处理实验数据后,样品介电常数中空气的介电影响被移除,从而得到了两种材料的本征介电常数,在此基础上,使用测得的本征介电常数和混合物样品中两种材料的体积占比信息代入包含气隙影响的LLL模型计算得到了不同配比混合物的太赫兹介电常数的模拟值,并与THz-TDS实验获取的实验值进行了对比。利用所提出的有效介质模型,聚乙烯和聚四氟乙烯在10～40 cm-1波段内移除空气影响后的平均介电常数为2.315±0.003（±0.13%）和2.109±0.003（±0.14%）,在不同重量、不同厚度的单组份样品间模型测定的聚合物介电常数保持了良好的重复性,在对混合物的太赫兹介电性质测定与分析中,利用模型计算的混合物介电常数模拟值与THz-TDS测定的介电常数实验值保持了高度线性相关,其相关系数为0.964 3,全局相对误差为1.08%,体现了模型的可靠性。提出的介电分析模型可以扩展到更多的高分子材料单质及其混合物的太赫兹介电性质表征中,对太赫兹波段的共混聚合物材料设计具有参考价值。     

The effect of temperature on laws of minor hysteresis loops in nickel single crystals with compressive deformation

The temperature dependence of minor hysteresis loops of compressively deformed nickel single crystals has been investigated in a wide temperature range below the Curie temperature of 628 K. There exist power-law relations between the field-dependent parameters of minor-loops, and their exponents are independent of both temperature and strain after the compressive deformation. These observations indicate the presence of universal power laws in minor hysteresis loops. The minor-loop coefficients of the power laws show a similar temperature dependence of the coercive force, which is quantitatively related to the dislocation density. These properties of minor hysteresis loops are useful for the accurate and quantitative nondestructive evaluation of age degradation in ferromagnetic materials.     

Tunable wavelength filters using polymer long-period waveguide gratings based on metal-cladding directly defined technique

In this work, long-period waveguide grating-based tunable wavelength filters using organic–inorganic grafting poly(methyl methacrylate)(PMMA) materials are designed and fabricated by metal-cladding directly defined technique.The thermal stabilities and optical properties of the organic–inorganic grafting PMMA core materials are analyzed. Structures and performance parameters of the waveguide gratings and self-electrode heaters are designed and simulated. The contrast of the filter is about 15 d B and the resonant wavelength can be tuned by different electric powers applied to the metal-cladding self-electrode heaters. The temperature sensitivity is 3.5 nm/℃ and the switching time is about 1 ms. The technique is very suitable for realizing the optoelectronic integrated wavelength-division-multiplexing systems.     

Zur Ermittlung der günstigsten Integrationszeitkonstanten bei der Durchstrahlungsprüfung

Bei der kontinuierlichen Durchstrahlungsprüfung von Werkstücken werden überwiegend Meßeinrichtungen, bestehend aus ⁶⁰Co-Strahlungsquelle, Szintillationsdetektor und schreibendem Meßgerät, verwendet 1.     

Radiophotolumenescence of Irradiated Polymethylmethacrylate Doped with Some Charge Transfer Complexes

Radiophotolumenescence (RPL) of irradiated and non irradiated thin films of polymethylmethacrylate (PMMA) doped with anthracene (Anth) as a donor, and tetracyanoquinodimethane (TCNQ) as an acceptor, has been investigated. The RPL – glow spectrum was recorded to study the characterizing emission bands from the point of view of glow peak position and intensity and hence the prospective relative sensitivities. RFL – signal fading after one month storage in dark at room temperature post gamma irradiation was also studied. PMMA doped with 6:4 donor to acceptor ratio has been proved to be the most sensitive one with less fading regarding gamma detection. On the other hand 2 Anth: 8 TCNQ was found to be the proper dopant concentration ratio for thermal neutron detection.