Hudson模型适用性及储层微观建模应用*

为明确裂缝间相互作用对各向异性的影响，本文以Hudson模型为例分析了裂缝密度、裂缝倾角对地震波波场、弹性常数和Thomsen系数的影响规律，然后采用“基质-骨架-流体”组合化的方法进行了裂缝储层微观尺度的建模，并与实际测井资料进行了对比。结果表明该模型适用条件为低裂缝密度储层，二阶模型适用的裂缝密度范围比一阶模型大，但在裂缝密度过大时，二阶模型会出现不收敛的现象，模型便不再适用。裂缝储层纵横波速度随裂缝倾角增大而增大，纵波速度对裂缝倾角更为敏感。另外，在与实际测井曲线对比时，在高裂缝密度地层二阶模型的应用效果明显优于一阶模型，说明了在高裂缝密度储层考虑裂缝间的相互作用的必要性。     

Numerical solution for the anisotropic Willmore flow of graphs

The Willmore flow is well known problem from the differential geometry. It minimizes the Willmore functional defined as integral of the mean-curvature square over given manifold. For the graph formulation, we derive modification of the Willmore flow with anisotropic mean curvature. We define the weak solution and we prove an energy equality. We approximate the solution numerically by the complementary finite volume method. To show the stability, we re-formulate the resulting scheme in terms of the finite difference method. By using simple framework of the finite difference method (FDM) we show discrete version of the energy equality. The time discretization is done by the method of lines and the resulting system of ODEs is solved by the Runge–Kutta–Merson solver with adaptive integration step. We also show experimental order of convergence as well as results of the numerical experiments, both for several different anisotropies.     

Tailoring thermal conductivity of bulk graphene oxide by tuning the oxidation degree

The thermal conductivity of graphene oxides can be tailored by tuning oxidation degree due to the introduction of atomic- and nano-scale phonon scattering centers.     

Ring current and anisotropy effects on OH chemical shifts in resonance-assisted intramolecular H-bonds

Ring current effects on resonance-assisted and intramolecularly bridged hydrogen bond protons for 10-hydroxybenzo[h]quinoline 1 and a number of related compounds were calculated and the through-space NMR shieldings (TSNMRS) obtained hereby visualized as iso-chemical-shielding surfaces (ICSS) of various size and direction. These calculations revealed that this through-space effect is comparably large (up to 2?ppm) dependent on the position of the intramolecularly bridged OH proton, and therefore, contribute considerably to the chemical shift of the latter making it questionable to use δ(OH)/ppm in the estimation of intramolecular hydrogen bond strength without taking this into account. Furthermore, the anisotropy effects of additional groups on the aromatic moiety (e.g. the carbonyl group in salicylaldehyde or in o-hydroxyacetophenone of ca. 0.6?ppm deshielding) should also be considered. These through-space effects need to be taken into account when using OH chemical shifts to estimate hydrogen bond strength.     

Growth of NaBi(WO4)2 crystal by modified-Bridgman method

NaBi(WO₄)₂ (NBW) crystals have been grown for the first time by modified-Bridgman method. Influences of some factors on the crystal growth process are discussed. X-ray powder diffraction experiments show that the unit cell parameters of NBW crystal are a=b=0.5284 nm, c=1.1517 nm, and V=0.3215 nm³. The differential thermal analysis shows that the NBW crystal melts at 923°C.     

Paramagnetic defects induced by ion implantation in oxide glasses

Radiation defects induced by ion bombardment of multicomponent oxide glasses of five compositions (phosphates and borosilicates) were investigated by means of electron paramagnetic resonance (EPR). The samples were implanted with N⁺, O⁺, Ar⁺, Mn⁺, Cu⁺ and Pb⁺ ions at energy E=150 keV at three different doses between 3×10¹⁵ and 10¹⁷ ions/cm². The broad anisotropic EPR spectra with principal g-values answering the relationship g_z>g_y>g_x˜g_e (g_e is g-factor of free electron) were observed for the samples of all five compositions. The g-values depend on glass composition. For example, g_z ranges from 2.016 to 2.057. Computer simulation shows that the spectra of many samples are superpositions of two spectra with g-values answering the mentioned relationship. These spectra are attributed to molecular O₂⁻ ions weakly coupled with glass network. In some samples narrow almost symmetric lines with g=2.0025±0.0005 were observed. The possible radiation defects responsible for this signal are discussed.     

A Hydrogen Bonded Supramolecular Framework Birefringent Crystal

Birefringent crystals could modulate the polarization of light and are widely used as polarizers, waveplates, optical isolators, etc. To date, commercial birefringent crystals have been exclusively limited to purely inorganic compounds such as α-BaB₂O₄ with birefringence of about 0.12. Herein, we report a new hydrogen bonded supramolecular framework, namely, Cd(H₂C₆N₇O₃)₂⋅8 H₂O, which exhibits exceptionally large birefringence up to about 0.60. To the best of our knowledge, the birefringence of Cd(H₂C₆N₇O₃)₂⋅8 H₂O is significantly larger than those of all commercial birefringent crystals and is the largest among hydrogen bonded supramolecular framework crystals. First-principles calculations and structural analyses reveal that the exceptional birefringence is mainly ascribed to strong covalent interactions within (H₂C₆N₇O₃)⁻ organic ligands and the perfect coplanarity between them. Given the rich structural diversity and tunability, hydrogen bonded supramolecular frameworks would offer unprecedented opportunities beyond the traditional purely inorganic oxides for birefringent crystals.     

Quasi-static response and texture evolution of α- and γ-RDX: a comparative study

In this paper, we undertake a comparative study of the stress–strain response and slip activity of α- and γ-polymorph of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) under pressure loading using a rate-dependent single-crystal plasticity model. Texture evolution studies are performed to further understand the effects of the dominant slip systems. The simulations indicate that the difference in elastic moduli and lattice parameters for α- and γ-RDX lead to different elastic–plastic constitutive response in the two polymorphs. γ-RDX exhibits more plastic slip compared to α-RDX for loading on (1 1 1) plane and the two polymorphs have different sets of dominant slip systems. We observe that the high-pressure slip system (0 0 1)[0 1 0] that is determined using molecular dynamics simulations is the most dominant slip system for this orientation. Whereas, for loading on (2 1 0) plane, α-RDX has marginally higher plastic slip than γ-RDX, though the same slip system is dominant for both the polymorphs. The texture evolution for loading on (1 1 1) and (2 1 0) planes follow the path towards the most dominant slip systems for both the polymorphs. We predict that the larger plastic slip in γ-RDX for loading on (1 1 1) plane might play an important role in understanding the reduced sensitivity for shock loading on (1 1 1) plane, when compared to (2 1 0) for which γ-RDX has lesser plastic slip, and (1 0 0) which is purely elastic.     

LOW POTENTIAL ELECTROPOLYMERIZATION OF ANISOTROPIC CONDUCTIVE POLYTHIOPHENE FILMS AND FABRICATION OF ELECTRICAL DEVICES

The complexation of thiophene with a Lewis acid with moderate acidity as a solvent, such as BF_3-ethyl ether (BFEE) remarkedly lowered the electrochemical polymerization potential. The positively chargedmetal surface of electrode in the process of electrochemical deposition enhanced the coordination interactionbetween π-electrons of thiophene unit and the metal, which makes thiophene rings lie parallel to the surfaceof electrode, resulting in a highly ordered polymeric structure. Because of the large intra-chain transferintegrals, the transport of charge is believed to be principally along the conjugated chains, which is muchgreater than the inter-chain hopping. The specific electrical resistance across the polythiophene film thicknessis more than 10~4 times than that along the surface plane of the film. In this paper we review the recentdevelopment of polymerization technique by low potential electrochemical method performed in our lab andseveral electrical devices in which the compact polythiophene films, such as anionic and cationic sieves, andlaminate film junction of undoped polythiophene derivatives were used.