催化裂化汽油中含硫化合物的分离氧化脱硫研究

以负载氧化铜的氧化铝层析柱对催化裂化(FCC)汽油全馏分进行分离,使其中的烷烃、烯烃与芳烃、含硫化合物分离成极性不同的两组,含硫化合物在芳烃组分中得以分离富集。分离后对芳烃组分中的含硫化合物进行氧化,脱硫率达72%。氧化后的芳烃组分与分离出来的烷烃、烯烃组分混兑,可使FCC汽油的总脱硫率达71·3%。     

Rh/Al2O3上CO和NO的吸附性能及相互作用

利用ＴＰ－ＩＲ动态方法研究了ＣＯ和ＮＯ在Ｒｈ／Ａｌ２Ｏ３上吸附性能和相互作用的动态行为，结果表明，Ｒｈ／Ａｌ２Ｏ３的孪生中心对ＣＯ的吸附强于对ＮＯ的吸会，线式和桥式中心则对ＮＯ的吸附强于对ＣＯ的吸附，ＣＯ和ＮＯ共吸附－ＴＰ（ＣＯ和ＮＯ中）－ＩＲ动态过程结果揭示出２２２４ｃｍ＾－１谱带的出现和强度的增加与孪生ＣＯ谱带以及吸附的ＮＯ谱带的强度减弱同时发生，表明是由吸附的ＮＯ和孪生ＣＯ形成Ｒｈ－ＮＣＯ。     

V2O5/MO-Al2O3（M = Mg，Ca，Sr，Ba）催化剂用于正丁烷催化氧化脱氢反应

采用浸渍法制备了不同V2O5担载量的V2O5/MO-Al2O3(M = Mg, Ca, Sr, Ba)催化剂,钒物种的前驱体为偏钒酸铵.对制备的催化剂进行了一系列表征,并对催化剂上正丁烷选择性氧化脱氢制取丁烯进行了反应研究.表征结果(包括比表面积、X射线衍射、傅里叶红外光谱、氢气程序升温还原和拉曼光谱)显示,不同碱土金属元素掺杂的催化剂显示不同的钒价态信息和催化性能.其中掺杂Ca, Sr, Ba的催化剂,正钒酸盐相很难被还原,因此催化剂的氧化还原循环难以建立,导致以上三种催化剂在正丁烷氧化脱氢反应中活性较低.然而, Mg掺杂的催化剂却显示出较高的催化活性和选择性.实验结果表明：在Mg掺杂的载体上担载5% V2O5的催化剂上600°C时可获得高达30.3%的正丁烷转化率和64.3%的烯烃总选择性.这与V2O5担载量为5%时,在获得高度分散的钒氧化合物物种时可使MgO晶相稳定存在密切相关.     

Dispersion of Colloidal Alumina using a Rhamnolipid Biosurfactant

Dispersability of colloidal alumina in water has been studied using a rhamnolipid containing biosurfactant. Zeta potential measurements revealed that the surface charge of alumina was altered due to adsorption of the biosurfactant and the iso‐electric‐point of alumina shifted from pH 9 to 6.3. Sedimentation tests indicated that the alumina suspension was completely dispersed for 3–5 hours in the presence of biosurfactant after which some settling was observed. Stability of the suspension in the time period studied was found to be independent of pH. Capillary suction time measurements showed that the alumina suspension was dispersed in the presence of the biosurfactant and varied with pH. Maximum dispersion is obtained in the pH range of 3.5–5 and 7–11 while a minimum is obtained around pH 6. This behavior is consistent with the changes in zeta potential in the presence of the biosurfactant and thus capillary suction time measurements appeared to be more reliable than the sedimentation tests. Optimization studies showed that about 60 mg/g of biosurfactant was necessary for best dispersion and dispersion could be done up to 40% solids. The application of a natural biosurfactant for dispersing colloidal alumina has been demonstrated.     

复合软模板法可控制备红毛丹状AlOOH/Al2O3纳米材料

以Al(NO₃)₃为铝源,尿素为均相沉淀剂, 在聚乙二醇400(PEG4000)-DL-天冬氨酸形成的复合软模板体系中, 通过简单的常压回流方式成功合成出形貌和尺寸较为均一的红毛丹状γ-AlOOH纳米结构, 继而考察了反应物和添加剂用量对前驱体形貌和尺寸的影响, 并对γ-AlOOH纳米结构可能的形成机理进行了探讨. 实验结果表明, 所合成的红毛丹状γ-AlOOH具有球中球的核壳结构, 统计得内球直径约为400 nm, 外壳外径约为600 nm, 密集状态的壳层厚度约为15 nm, 毛刺状凸出物长度可达60 nm以上. 前驱体样品经600℃煅烧5 h后即转变为具有良好形貌继承性的γ-Al₂O₃, Brunauer-Emmett-Teller (BET) N₂-吸附实验表明其比表面积高达299.97 m²·g^-1.     

聚甲基丙烯酸甲酯在纳米氧化铝表面的吸附和氢键作用

研究了聚甲基丙烯酸甲酯(PMMA)在纳米氧化铝表面的吸附行为, 采用透射红外光谱研究了吸附的PMMA中的羰基和纳米氧化铝表面羟基之间的氢键作用. 结果表明, PMMA在纳米氧化铝表面的吸附曲线为典型的Langmuir曲线, 饱和吸附值为1.2 mg/m2, 受氢键作用影响, 键合羰基在红外光谱中的吸收峰向低波数方向移动. 根据计算, 羰基的最大键合值(即含键合羰基的甲基丙烯酸甲酯单元的总质量)为0.36 mg/m2, 其余为自由羰基. 随着吸附量的增加, 羰基的键合比例逐渐降低. 吸附达到饱和时, 羰基键合比例为0.30, 说明PMMA主要以平铺的方式覆盖在纳米氧化铝的表面.     

Synthesis and textural evolution of alumina particles with mesoporous structures

Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous γ-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl⁻ in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into γ-Al₂O₃ particles with mesostructures after further calcination at 1173 K, whereas coexisting SO₄²⁻ can promote above morphology evolution and then transformed into γ-Al₂O₃ nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m² g⁻¹ even after calcinations at 1173 K.     

Rheological properties of paraffin suspensions of surface-modified alumina powder for low-pressure injection moulding

Due to the hygroscopic nature of fine alumina powders, the presence of water may have a detrimental effect on the rheological properties of a suspension in melted paraffin for low-pressure injection moulding (LPIM). For this reason, a modification of the powder surface from hydrophilic to hydrophobic is essential for the production of high-quality moulded ceramics. In our paper, the efficiency of the application and the chemisorption of protective monomolecular layers of a long-chain carboxylic acid or its salts will be presented. The effect of the powder treatment on the shear viscosity and the viscoelastic properties of the suspensions for LPIM as well as on their stability in terms of the detrimental effect of water will be discussed.This paper was presented at the first Annual European Rheology Conference (AERC) held in Guimarães, Portugal, September 11-13, 2003.     

Part I. Chromatography using ultra-stable metal oxide-based stationary phases for HPLC

The first part of the review contrasts the main drawbacks of silica-based packings such as their relative thermal and chemical instability with excellent stability of metal oxides. The paper concerns mainly ZrO2, TiO2 and Al2O3. Methods of preparation of spherical particles for HPLC are described. Surface chemistry of the oxides is, however, very different from that of silica. Ability of the oxides to ion- and ligand exchange is discussed from a chromatographic point of view.     

The influence of preparative parameters on the adhesion of alumina washcoats deposited on metallic supports

Well-adhered alumina washcoats on FeCrAl metallic supports were prepared using boehmite sols and alumina slurries. The microstructure and the surface performance of the washcoat/support were investigated by SEM, XRD, and ultrasonic vibration. The effects of the main preparative parameters on the coating adherence were studied. The optimal coating conditions are presented as follows: pre-oxidation of the metallic supports was performed at 900 °C for 10 h, the sol layer loadings were 2.0-6.6 wt.%, and the slurry layer loadings were less than 25.3 wt.%. The sol layer drying was performed at 30 °C for 1 h and that for the slurry layer the drying was performed at 120 °C for 2 h, and the coating calcining was performed at 900 °C for 2 h. The SEM photographs of coated samples show that alumina washcoats were well deposited on the metallic supports.