硼砂与氯化铵合成hBN反应机理的研究

 研究了以硼砂、氯化铵为原料在氨气气氛下合成hBN 的反应机理。指出氯化铵在反应中的主要作用是与硼砂反应形成可阻止硼砂颗粒团聚的高熔点膜层；而氨气的主要作用就是提供大量参与反应的NH₃分子，增加了反应几率；新生成的hBN则进一步隔离高度熔融的硼砂团粒，防止玻璃相的生成。     

Fabrication of patterned gold electrodes with spin-coated-and-fired Au(1 1 1) film by the soft lithography

We prepared high quality Au(1 1 1) film on Si wafer through the spin coating and thermal decomposition of a gold ink, spin-coated-and-fired (SCAF) Au film. The X-ray measurements, XRD and pole-figure analysis, showed that the SCAF Au film has a (1 1 1) out-of-plane orientation with a random in-plane orientation. In order to confirm the chemical activity of the SCAF Au film, we demonstrate the formation of patterned structures with the film by using soft lithography technique. The chemical activities of this physically stable SCAF Au film to the alkanethiols were at least equivalent those of physically deposited the Au films. The possibility of the mass production of micro patterned structure with the SCAF Au film was also demonstrated over the wide region on Si wafer by the microcontact lithography. These suggest that the Au film will help the easy fabrication of various nanosized devices on Si wafer and other substrates.     

关于PFI-代数与剩余格

本文提出了一种强FI代数-PFI代数,并且深入研究了它的性质,借此进一步揭示了FI-代数和剩余格之间更加密切的联系,进而以FI-代数为基本框架建立了R0-代数、正则剩余格等逻辑系统的结构特征(包括对隅结构)及其相互关系．这种以FI-代数为基础来统一处理剩余格和R0-代数的方法,同样适合于格蕴涵代数和MV代数等代数结构,而且从中更能清楚地看出它们之间的密切联系,也将有助于对相应形式逻辑系统与模糊推理的研究．     

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

Investigation of chemical decomposition of CCl4 on TiO2 near room temperature

Dissociative adsorption of CCl₄ on TiO₂ at 35 °C has been studied by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electron spin resonance. CCl₄ decompose to form CO, CO₂, and CO₃ on the surface, at such a low temperature, in which CO₂ formation is not from CO oxidation on TiO₂, but CO₃ can be produced by CO and CO₂ adsorption. The Cl generated from CCl₄ decomposition is left on the surface and bonded to titanium ions. Mineralization of CCl₄ on TiO₂ involves the lattice oxygens. Thermodynamical driving force and possible reaction routes for CO and CO₂ formation in the CCl₄ decomposition on TiO₂ are discussed.     

Dielectric and conduction mechanism studies of PVA-orthophosphoric acid polymer electrolyte

Polyvinyl alcohol (PVA)-based proton conducting polymer electrolytes have been prepared by the solution cast technique. The conductivity is observed to increase from 10⁻⁹ to 10⁻⁴ S cm⁻¹ as a result of orthophosphoric acid (H₃PO₄) addition. The plot of conductivity vs temperature shows that a phase transition occurred at 343 K in the sample PVA-33 wt% H₃PO₄. The β-relaxation peak is observed at 313 K. The glass transition temperature of PVA-33 wt% H₃PO₄ is 343 K. Orthophosphoric acid seems to play a dual role, i.e., as a proton source and as a plasticizer. The ac conductivity σ _ac = Aω ^s was also calculated in the temperature range from 303 to 353 K. The conduction mechanism was inferred by plotting the graph of s vs T from which the conduction mechanism for sample PVA-17 wt% H₃PO₄ was inferred to occur by way of the overlapping large polaron tunneling (OLPT) model and the conduction mechanism for the sample PVA-33 wt% H₃PO₄ by way of the correlated barrier height (CBH) model.     

Synthesis and cyclization of 1-arylalk-1-ene-3,5-diynylamines

An investigation of the reaction of 1-lithio-1,3-diynes, generated in situ, with nitriles has been carried out. In the case of aromatic nitriles 1-arylalk-1-ene-3,5-diynylamines are formed, which undergo dimerization and cyclization on isolation, giving 3-(alka-1,3-diynyl)-4-(alk-2-ynyl)-2,6-diarylpyridines. The effect of the nature of the substituent in the benzonitrile molecule on the selectivity of the reaction and the yield of the products has been determined. A scheme is proposed for the conversions and the structures of the intermediates have been established. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 701–710, May, 2006.