SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

Measurements of Boundary Plasma in Synergy Discharges of IBW and LHCD on the HT-7 Tokamak

By applying ion Bernstein wave (IBW) heating into the lower hybrid current drive (LHCD) plasma, improved confinements have been obtained in the HT-7 tokamak. The central electron temperature was doubled and the storage energy was increased significantly. The core electron density and temperature were broadened and ther profiles near the edge were steepened. A transport barrier has been formed in the vicinity of the limlter radial location. An enhanced shear in poloidal phase velocity was found in the same region with reduction of the fluctuation levels and the coherences between fluctuations. The results suggest that the improved confinement in the IBW and LHCD plasma is at least partially due to the modification of shear in poloidal velocity and then the suppression of fluctuations and fluctuation induced fluxes via de-correlation effect.     

Structure of Callisto and Ice Holes on Its Surface

The discovery of the induced magnetic field of Callisto that is a satellite of Jupiter has been interpreted as evidence for a subsurface salty liquid-water ocean,so we consider a layered structure of callisto,i.e.,a rock-metal core,an outer layer of ice and a middle layer of ocean.For the rock-metal core we try to indicate how the temperature,pressure and mass density depend on the depth.Due to motionn across the magnetic field of Jupiter in a plasma environment,the ice shell of Callisto must be broken down by electric current.     

离子束辅助沉积多层复合Cr／CrN涂层改善W9Cr4V2Mo轴承钢耐磨性和耐腐蚀性研究

由于具有良好的耐磨、抗腐蚀性以及高氧化性，目前，CrN涂层被证明是提高轴承寿命的最佳方法之一。然而随着机械器件工作环境恶劣程度的增加，单一的涂层已不能满足一些特殊的要求，尤其对于轴承，更需要寻求一种新的涂层技术来进一步提高其耐磨性、耐腐蚀性等特性。90年代以来，多层复合技术的应用受到了极大的重视。     

DICP Symposium （I） on Catalysis： Future Directions of Catalysis Science and Technology October 16-18, 2003, Dalian, China

Introduction and Invitation DICP Symposium is a special series of interna-tional conference named after the Dalian Instituteof Chemical Physics (DICP). The DICP Symposiumwas founded with the purpose to promote the interna-tional communication and collaboration between theDICP and the international scientific community, to     

化学非平衡夸克-胶子物质中等质量双轻子的产生

研究了正在进行化学平衡的富重子夸克-胶子物质的双轻子产生，发现由于产生在RHIC能量 的化学非平衡的富重子夸克-胶子物质冷却慢和高的初始温度，导致中等质量双轻子产生重 大增强.因此，中等质量双轻子的增强可以是夸克-胶子物质形成的信号.同时，这个增强能 补偿由于初始夸克化学势增加引起的双轻子抑制，因而双轻子产额的抑制不再是夸克-胶子 物质产生的信号. 关键词： 化学非平衡夸克-胶子物质 热粲夸克 双轻子     

Au等离子体M带5f-3d跃迁的电子离子碰撞激发速率系数

电子离子碰撞激发速率系数在超组态碰撞辐射模型中真实模拟非局域热动力学平衡Au激光等离子体M带谱 5f 3d跃迁中各种复杂电荷态离子的电离态特性 (譬如离子的平均电离度 ,相对丰度和能级布居数 )是必不可少的。基于准相对论多组态Hartree Fock方法和扭曲波玻恩交换近似 ,采用自编的扭曲波程序ACDW (9)和Fit(9) ,从头计算了Au等离子体M带 5f 3d电子离子碰撞激发速率系数。结果表明 :在“神光II”实验装置诊断的电子温度约 2keV ,电子密度约 6× 10 2 1cm-3 范围内 ,这些电子离子碰撞激发参数有利于采用超组态碰撞辐射模型模拟Au的激光等离子体M带 5f～ 3d细致谱的平均电离度和电荷态分布。     

PECVDSiON薄膜的工艺控制,性质及其潜在应用

研究了等离子增强化学气相淀积氮氧化硅薄膜的工艺控制、性质以及薄膜波导在超大规模集成电路光互连中的潜在应用。