自集成透镜InGaAsP／InPDHLED及其离子束铣技术

本文报道在国内首次采用离子束铣技术研制自集成透镜InGaAsP/InP DH LED的实验结果。采用烘烤正性光致抗蚀剂来形成球状掩膜适合于离子束铣,且重复性很好。为了获得光洁的刻蚀表面,刻蚀条件均已最优化。     

Self-Mixing Interference in Dual-Polarization Microchip Nd：YAG Lasers

The self-mixing interference in dual-polarization microchip Nd: YA G lasers is demonstrated. Under optical feedback, the orthogonal polarization components of the laser would undergo antiphase intensity modulations; at high feedback level, the polarization switching appears. We also observe that the laser self-mixing sensitivity changes periodically with the frequency difference of orthogonal polarizations. An initial theoretical model is put out and agrees well with the experiments. The results are useful for self-mixing sensitivity enhancement and offer a new way of absolute distance measurement.     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

电子碰撞诱导原子从低激态向高激态弛豫

本文根据空心阴极放电中电子能量分布的物理图象,分析了原子从低激态向高激态弛豫的可能途径。建立高低激态集居数密度增量的关系。讨论高激态集居数密度增量获得可观量的条件。根据此条件分别选取钠原子的基态3s~2S_(1/2)和铜原子的亚稳态4s~2D_(3/2)为与激光共振的下能级,并激发具有较大自发发射几率的3s~2S_(1/2)→3p~2P°_(1/2)(和3p~2P°_(3/2))和4s~2D_(3/2)→4p~2P°_(1/2)跃迁,在远离上能级的高激态上观测到敏化荧光,并精确测得这些态的自发发射系数比值,而在更高激态上没有观测到敏化荧光,表明讨论中提出的条件是合理的。     

L-半胱氨酸自组装膜电极上锌离子的电化学行为及分析应用

锌是人体必需的微量元素 ,也是金属酶的组成部分和酶的激活剂 ,目前已知有 80多种酶的活性与锌的存在有关 ,因此研究锌在生物分子 (如Ｌ 半胱胺酸 )自组装膜结构中的电化学行为 ,对于研究和了解生物体内生命物质的电子转移及生命现象的本质具有重要意义。本文研究Ｚｎ2 +在Ｌ 半胱氨酸自组装修饰金电极[1～3] ,Ｃｙｓ/ＳＡＭ/Ａｕ上的电化学行为 ,建立了测定Ｚｎ2 +浓度的新方法 ,用于人体发样中痕量Ｚｎ2 +的测定 ,与目前所报道的锌的测定方法[4] 相比 ,具有快速、准确、灵敏度高等特点。1　实验部分1 1　仪器与试剂ＣＨＩ660型电化学工作…     

同多酸和杂多酸修饰微电极的电化学研究——Ⅳ.1:2-磷钼杂多酸薄膜修饰碳纤维微电极的制备和电化性质

本文报道了1:12-磷铜杂多酸(PMo_(12)薄膜修饰碳纤维(CF)微电极的制备及其电化学性质。采用简单,快速的浸渍吸附制备的PMo_(12)薄膜修饰CF电极在酸性介质中具有很高的稳定性和氧化还原活性,电解质溶液的pH值和扫描电位范围对PMo_(12)膜的稳定性和电化学性质产生较大的影响。另一方面,PMo_(12)薄膜修饰CF微电极对酸性水溶液中的PMo_(12)和氯酸根离子(ClO)_3~-)的电催化还原作用也进行了描述。     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

2-巯基乙醇自组装膜电极对多巴胺电催化氧化及其分析应用

在裸金电极上制备了 2 巯基乙醇自组装膜电极 (ME AuSAMs) ,研究了多巴胺 (DA)在ME AuSAMs上的电化学行为 ,发现该膜电极对DA的氧化具有良好的电催化作用 ,氧化过电位降低了 3 94mV ,测得DA的扩散系数D为 9.1 4 5× 1 0 - 7cm2 s,初步探讨了电催化机理。采用水平衰减全反射 傅里叶变换红外光谱 (ATR FTIR)技术对ME AuSAMs进行了表征 ;方波伏安法 (squarewavevoltammetry ,SWV)测定DA ,其氧化峰电流与DA浓度在 2 .0 0× 1 0 - 6 ～ 1 .0 0× 1 0 - 4 mol L范围内呈线性关系 ;相关系数为 0 .9998,检出限为 4 .0 0× 1 0 - 7mol L。该电极用于DA药物针剂的测定 ,结果满意     

聚丙烯酰胺/醋酸铬与聚丙烯酰胺/酚醛胶态分散凝胶的纳米颗粒自组织分形结构

采用原子力显微镜 ,分别对无机交联体系聚丙烯酰胺 Cr3+ 和有机交联体系聚丙烯酰胺 酚醛胶态分散凝胶的微观结构进行了显微图像分析 .发现无论是在有机还是无机交联体系中 ,也无论聚丙烯酰胺和交联剂浓度如何变化 ,在微米尺度上最终形成的都是具有自相似性的树枝状分形图像 ,在更小尺度上则发现单个小树杈分形体都是由纳米级的颗粒紧密堆积而成 .在所研究的胶态分散凝胶体系中 ,树枝状分形结构的形成及其具体的形态取决于聚丙烯酰胺的浓度 ,而交联剂的有无及其多少只对树枝状凝胶分形的几何形态产生一定影响 .实验结果还表明纳米级 (≤ 10 0nm)的胶体颗粒构成的分形结构的凝胶其弹性模量G′比微米级的高出一个数量级 .且粒子尺度越小 ,则凝胶的力学稳定性越强