硅藻土增强橡胶复合材料的研究进展

硅藻土是单细胞硅藻的遗骸经自然条件形成的硅质沉积岩,因其具有质轻、大的比表面积、超强的吸附性、隔音、耐磨、耐热以及耐腐蚀等特点而被广泛应用于化工、石油、建材、生物医药卫生以及环保等众多领域。然而由于硅藻土与白炭黑的结构成分相似,白炭黑通常用作橡胶的补强填料,目前硅藻土用于橡胶补强填料的研究鲜少报道。本文综述了硅藻土的性能、硅藻土的国内外研究现状、硅藻土的改性以及硅藻土增强橡胶复合材料的制备过程,并对硅藻土增强橡胶复合材料的发展趋势做了展望。     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

软刻蚀及其应用

软刻蚀是一类基于自组装和复制模塑等原理的非光刻微米和纳米加工方法。它为形成和制作微米、纳米图案提供了简便、有效、价廉的途径。在软刻蚀中，用一个表面带图案的弹性模板来实现图案的转移，其加工的分辨率可达30nm－100μm。软刻蚀是微接触印刷、复制模塑、转移微模塑、毛细微模塑、溶剂辅助微模塑等的总称。本文将简介软刻蚀的原理、方法以及它们在微米和纳米加工、微电子学、材料科学、光学、微电子机械系统、表面化学等方面的应用。     

SDS/n－C5H11OH/n－C7H16/H2O体系中W/O－BI微乳液界面电性质

In the system of SDS/n-C5H11OH/n-C7H16/H2O with the weight ratio of SDS/n-C5H11OH/H2O system at5.0/47.5/47.5, the upper phase of the system was W/O microemulsion, and the lower phase was the bicontinuous microemulsion. When the n-heptane content was less than 1%, with the increase of the n-heptane content, the capacitance (Co, Cod) in the upper phase (W/O) dropped, the capacitance (CB1, CBld) in the lower phase (BI) raised. At the same time, the W/O-BI inteffacial potential (ΔE), capacitance (Ci), and charge-transfer current (ict) decreased.After the n-heptane content reached 1%, with the increase of the n-heptane content, ΔE, Ci and ict demonstrated no significant change.     

聚丙烯/纳米蒙脱土复合材料的结晶动力学研究

采用热分析方法，研究了聚丙烯／纳米蒙脱土复合材料（PP／CLAY）的等温结晶行为，并分别用Avrami方程和赵志英方法对所得数据进行了分析，研究结果表明，纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响，可提高聚丙烯的结晶速率并改善结晶结构。     

TiO2/Eu-MCM纳米超分子材料的组装和光催化性能

利用有机相-水相界面共沉淀溶胶支持自组装方法制备粒径为15 nm、孔径为8 nm的分子筛Eu-MCM, 它拥有734 m²/g的比表面积和1.49 cm³/g的比孔容. 把TiO₂组装到Eu-MCM的孔道中, 组装成TiO₂/Eu-MCM纳米复合材料. XRD, RAMAN和选区电子衍射花样分析表明纳米复合材料中的TiO₂为锐钛型. TiO₂/Eu-MCM的发光表现为Eu^3＋离子的特征光谱, 激发峰分别为342 (⁵L₁₀), 358 (⁵L₉), 378 (⁵L₇), 390 (⁵L₆), 411 (⁵D₃), 462 (⁵D₂)和524 (⁵D₁) nm; 发射峰为579, 592, 613, 653和701 nm, 归属于⁵D₀→⁷F_J (J＝0, 1, 2, 3, 4)组态间的跃迁. 纳米复合材料的发光强度都要比Eu-MCM的发光强, 其中43%TiO₂/Eu-MCM的发光最强. 荧光和紫外漫反射结果表明客体TiO₂对主体分子筛存在能量传递效应. 在微弱的紫外灯光照射下, TiO₂/Eu-MCM纳米复合材料对苯酚的光催化氧化性能和其发光强度具有一定的相关性. 29%TiO₂/Eu-MCM的纳米复合材料拥有的比表面积、孔容和孔径分别为204 m²/g, 0.24 cm³/g和4.7 nm. 29%TiO₂/Eu- MCM对苯酚具有68%的最高光催化氧化产率和85%催化氧化选择性.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

阳离子交换树脂的有机催化进展

综述了聚苯乙烯型磺酸树脂、全氟磺酸树脂Nafion及崭新的Nafion／siO_2复 合催化剂在有机合成中应用的最新进展．     

累托石/聚丙烯插层纳米复合材料的制备与性能

采用熔融共混法制备了有机改性累托石 (OREC)粘土 均聚聚丙烯 (PP)纳米复合材料 ,以X 射线衍射分析 (XRD)及透射电子显微镜分析 (TEM)观察了复合材料的相貌结构 ,研究了复合材料的力学性能及热性能 .结果表明 ,OREC在添加份数较少时可与均聚聚丙烯熔融插层形成插层型聚丙烯纳米复合材料 ,该复合材料与纯PP相比 ,具有较高的拉伸强度、断裂伸长率及冲击强度 .在有机粘土添加 2 %时 ,复合材料的拉伸强度、断裂伸长率、冲击强度最高 ,与纯PP相比 ,2 %添加量的聚丙烯纳米复合材料拉伸强度提高 6 5 7% ,断裂伸长率提高 2 89 3% ,冲击强度提高 14 1% ,10 %失重率时对应的热分解温度提高 50K .     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.