石墨烯/导电聚合物复合材料在超级电容器电极材料方面的研究进展

从方法学上总结了目前石墨烯/导电聚合物复合材料的制备途径,重点介绍了其在能源领域作为超级电容器电极材料的应用,并归纳了其在传感器材料、燃料电池、太阳能电池、电致变色器件及锂离子电池等方面的研究进展.     

Bi_2MoO_6/BiVO_4异质结的水热合成和可见光催化活性(英文)

采用一步水热法制备Bi2MoO6/BiVO4复合光催化剂.利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征.结果表明,Bi2MoO6纳米粒子沉积在BiVO4纳米片表面从而形成异质结结构.紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi2MoO6/BiVO4异质结较纯相Bi2MoO6和BiVO4对可见光吸收更强.由于形成异质结结构及其光吸收性能使Bi2MoO6/BiVO4光催化活性有较大提高.可见光下(λ420 nm)光催化降解罗丹明B(RhB)实验结果表明,Bi2MoO6/BiVO4光催化活性较纯相Bi2MoO6和BiVO4高.Bi2MoO6/BiVO4样品光催化性能提高的原因是Bi2MoO6和BiVO4形成异质结,从而有效抑制光生电子-空穴对的复合,增大了可见光吸收范围及比表面积.     

Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

静电自组装方法合成的具有多孔三维网络结构的Fe_3O_4/石墨烯复合材料作为高性能锂离子电池负极材料(英文)

采用静电自组装方法,分两步合成Fe(OH)3/GO前驱体(GO:氧化石墨烯),再通过水热反应和600°C高纯氮气气氛下煅烧,获得了Fe3O4/石墨烯复合材料.通过X射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HRTEM)、拉曼(Raman)光谱等多种分析,发现该复合材料具有三维多孔石墨烯网络结构.把合成的这种Fe3O4/石墨烯复合材料作为锂离子电池负极材料,电化学测试结果表明其具有优良的电化学性能:首次放电容量为1390 mAh·g-1,50次循环后容量为819 mAh·g-1.通过对比实验表明,三维石墨烯网络结构的形成对复合材料的电化学循环稳定性起着关键作用.     

氮掺杂碳球/银纳米材料用作过氧化氢传感器

以氮掺杂碳球作为载体负载银纳米材料,并将其用作非酶电化学传感器对过氧化氢进行检测.考察了过氧化氢浓度、扫描速率对电化学信号的影响,并采用计时电流法对传感器的性能进行了研究.电化学测试结果表明,该复合材料在磷酸缓冲溶液中对过氧化氢还原响应快速、稳定,重复性良好,可以达到1.5μmol/L的检出限.     

Preconcentration of chlorophenols in water samples using threedimensional graphene-based magnetic nanocomposite as absorbent

In this paper, a novel magnetic solid-phase extraction method using three-dimensional graphene-based magnetic nanocomposite as adsorbent for the preconcentration of several chlorophenols from water samples prior to high-performance liquid chromatography analysis was developed. Various experimental parameters were investigated. Under the optimum conditions, the enrichment factors of the method were in the range of 186–312, and the limit of detection(S/N = 3) was 0.10 ng/mL. The recoveries of the method were in the range between 85.1% and 101.2%. The developed method has been successfully applied to the determination of chlorophenols in environmental water samples.     

耐高温聚酰亚胺树脂研究

综述了耐高温聚酰亚胺树脂及其碳纤维增强复合材料、耐高温聚酰亚胺超级工程塑料和高性能功能性聚酰亚胺薄膜等的研究进展。耐高温聚酰亚胺树脂包括第一代耐316℃系列、第二代耐371℃系列、第三代耐426℃3个系列的产品;耐高温聚酰亚胺超级工程塑料包括反应性热模压成型和高温注塑成型的材料;高性能聚酰亚胺薄膜包括透明性聚酰亚胺薄膜和抗原子氧PI薄膜树脂。本文介绍了它们的结构,工艺以及性能,并对其在航天、航空空间技术及微电子等其它领域中的应用情况做了简单的介绍。     

橡胶纳米复合材料的一些新进展

近十年来出现了许多新型的橡胶纳米复合材料体系,这些体系展现出比传统体系更强的可设计性、更丰富的性能表现或者呈现功能性质。本文主要综述了橡胶基纳米复合材料的新体系设计和制备方法。基于目前研究现状,作者展望了橡胶纳米复合材料研究若干个值得关注的方向。     

3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

Sulfur/carbon composites prepared with ordered porous carbon for Li-S battery cathode

Ordered porous cabon with a 2-D hexagonal structure,high specific surface area and large pore volume was synthesized through a twostep heating method using tri-block copolymer as template and phenolic resin as carbon precursor.The results indicated the electrochemical performance of the sulfur/carbon composites prepared with the ordered porous carbon was significantly affected by the pore structure of the carbon.Both the specific capacity and cycling stability of the sulfur/carbon composites were improved using the bimodal micro/meso-porous carbon frameworks with high surface area.Its initial discharge capacity can be as high as 1200 mAh·g~(-1) at a current density of 167.5 mA·g~(-1)The improved capacity retention was obtained during the cell cycling as well.