行波堆深燃耗的计算特点

行波堆属于新概念堆型,卸料燃耗深度可达400 GWd/tHM,是现有快堆的3~4倍、压水堆的6~8倍,较高的卸料燃耗深度对堆芯物理分析工具计算正确性提出挑战。基于此,以KYLIN-1程序为基础,从能谱、裂变产物核素重要性、燃耗计算误差累积等方面探究行波堆深燃耗计算特点。对典型行波堆六角形组件分析结果表明:低富集度铀组件寿期初、末能谱差别较大,采用单一权重谱制备的多群截面库用于其燃耗计算时,无限增殖系数偏差较大;为保证行波堆深燃耗计算的正确性,燃耗链应包含重要的70种裂变产物核素;行波堆深燃耗计算时,由于燃耗步增多累积的误差较小,无限增殖系数偏差每燃耗步约为0.001%。     

不同升温速率下AP/HTPB底排装置慢速烤燃的数值模拟

为研究在不同升温速率下高氯酸铵(ammonium perchlorate, AP)/端羟基聚丁二烯(tydroxyl-terminated polybutadiene, HTPB)底排装置的慢速烤燃特性,建立AP/HTPB底排推进剂二维轴对称非稳态传热模型和两步化学动力学反应模型。在不同升温速率下,分析底排装置的慢速烤燃响应特性。计算结果表明:在慢速烤燃的条件下,烤燃响应点发生在底排药柱与空气腔的接触面左侧,升温速率对底排药柱的着火延迟时间和烤燃响应点位置有较大影响。随着升温速率的提高,着火延迟时间变短,烤燃响应点向中心侧移动。升温速率对烤燃响应点的着火温度影响较小。     

基于DIC方法的残余应力快速测量系统

结合数字图像相关(Digital Image Correlation,DIC)方法与钻孔法,开发了残余应力快速测量系统。该系统可分为两部分:适用于现场测量的便携式机械系统与针对残余应力测量而改进的基于DIC算法的程序。在四点弯曲加载平台上对工件进行载荷释放前后的残余应力测量试验,通过与应变片测量结果进行对比,该残余应力测量系统的精度达到了应变片测量的同等精度。同时,该测量系统解决了传统应变片测量系统对心误差大、操作繁琐、效率低和测量结果稳定性差等问题,具有较高的工程应用价值。     

State-dependent event-triggered control of multi-agent systems

Event-triggered control has been recent/y proposed as an effective strategy for the consensus of multi-agent systems. We present an improved distributed event-triggered control scheme that remedies a shortcoming of some previous event- triggered control schemes in the literature. This improved distributed event-triggered method has no need for continuously monitoring each agent＇ neighbors. Moreover, each agent in the multi-agent systems will not exhibit the Zeno behavior. Numerical simulation results show the effectiveness of the proposed consensus control.     

Synthesis of multi-walled carbon nanotubes using CoMnMgO catalysts through catalytic chemical vapor deposition

The Co Mg O and Co Mn Mg O catalysts are prepared by a co-precipitation method and used as the catalysts for the synthesis of carbon nanotubes（CNTs） through the catalytic chemical vapor deposition（CCVD）. The effects of Mn addition on the carbon yield and structure are investigated. The catalysts are characterized by temperature programmed reduction（TPR） and X-ray diffraction（XRD） techniques, and the synthesized carbon materials are characterized by transmission electron microscopy（TEM） and thermo gravimetric analysis（TG）. TEM measurement indicates that the catalyst Co Mg O enclosed completely in the produced graphite layer results in the deactivation of the catalyst. TG results suggest that the Co Mn Mg O catalyst has a higher selectivity for CNTs than Co Mg O. Meanwhile, different diameters of CNTs are synthesized by Co Mn Mg O catalysts with various amounts of Co content, and the results show that the addition of Mn avoids forming the enclosed catalyst, prevents the formation of amorphous carbon, subsequently promotes the growth of CNTs, and the catalyst with decreased Co content is favorable for the synthesis of CNTs with a narrow diameter distribution.The Co Mn Mg O catalyst with 40% Co content has superior catalytic activity for the growth of carbon nanotubes.     

清华大学应用力学教育部重点实验室主任招聘启事

正清华大学应用力学教育部重点实验室(AML)是我国理论和应用力学研究和人才培养的重要基地。AML的前身为国家教委1993年国家教委批准成立的破坏力学开放研究实验室,1999年正式命名为破坏力学教育部重点实验室,2008年     

压水堆核电站燃料组件弯曲对堆芯中子学的影响分析计算

在压水堆核电站中,由于燃料组件装配的压紧力、冷却剂流动、辐射蠕变、燃耗等因素会导致燃料组件的弯曲,燃料组件的弯曲对组件间的水隙分布产生影响,从而影响中子的慢化行为及堆芯的传热性能,进而对反应堆堆芯的运行参数造成影响。本文分析了组件弯曲的成因及机理、影响及后果（包括对堆芯功率分布、径向功率倾斜、焓升因子、热点因子等参数的影响）,并使用蒙特卡罗软件JMCT,对组件弯曲的确定论计算程序的正确性进行了验证。最后通过确定论的计算程序模块,对CPR1000核电站的组件弯曲情况进行了模拟分析,计算结果表明:在某一燃耗下,随着水隙增加或减小,燃料组件功率会随之增加或减小,使堆芯的功率分布发生倾斜,影响核电站的安全运行。     

不同类型核燃料对热管冷却反应堆燃耗性能的影响

热管冷却反应堆采用固态反应堆设计理念,具有功率密度高、结构紧凑、固有安全性高等特点,在深空探索、深海勘探、偏远地区等场景中具有广阔的应用前景。核燃料作为热管冷却反应堆的重要组成部分,不同类型核燃料在堆芯燃耗分析时会呈现不同的中子学性能。基于美国爱达荷国家实验室(INL)提出的热管冷却反应堆INL Design A,利用清华大学蒙特卡罗中子输运程序RMC (Reactor Monte Carlo code)建立堆芯物理模型,选取UO₂,(U_0.9Pu_0.1)O₂,U-10Zr,U-8Pu-10Zr,UN,UC这6种核燃料开展燃耗计算,分析了不同核燃料、不同功率水平对热管冷却反应堆堆芯燃耗性能的影响。计算结果表明:在堆芯燃耗深度相同情况下(20.8 GW·d·t?1),装载U-8Pu-10Zr燃料的堆芯所需235U富集度最低(9.8%),具有较好的U-Pu增殖性能。堆芯功率处于5 MW的热管冷却反应堆,燃料中241Pu的存在不仅没起到增大堆芯燃耗深度的作用,反而导致堆芯剩余反应性和堆芯寿期末次锕系核素(MAs)的产量增大,影响反应堆的安全性与经济性。因此,对于装载含有Pu燃料的小功率长寿期热管冷却反应堆,需重点关注241Pu对堆芯燃耗性能的影响。     

Variable selection for generalized varying coefficient partially linear models with diverging number of parameters

Semiparametric models with diverging number of predictors arise in many contemporary scientific areas.Variable selection for these models consists of two components:model selection for non-parametric components and selection of significant variables for the parametric portion.In this paper,we consider a variable selection procedure by combining basis function approximation with SCAD penalty.The proposed procedure simultaneously selects significant variables in the parametric components and the nonparametric components.With appropriate selection of tuning parameters,we establish the consistency and sparseness of this procedure.     

低温等离子体协助B_2O_3/γ-Al_2O_3 选择催化还原NO(英文)

研究了低温等离子体协助催化条件下甲烷选择性催化还原NO反应(SCR).反应气体经等离子体活化后,生成NO2,HCHO,CH3NO和CH3NO2等活性更高的中间产物.程序升温表面反应表明,这些中间产物可在等离子体后置催化装置上进一步反应,从而使NOx还原为N2.在考察的一系列催化剂(包括γ-Al2O3,Ag/γ-Al2O3,B2O3/γ-Al2O3,Ga2O3/γ-Al2O3,In2O3/γ-Al2O3等)中,B2O3/γ-Al2O3表现出最好的催化活性.当反应温度为300oC时,NOx转化率达到最高.与γ-Al2O3催化剂相比,在10wt%B2O3/γ-Al2O3催化剂上,300oC时,NOx转化为N2的转化率从33.4%提高至51.0%.催化剂的酸性对于经等离子体活化后的反应气体在催化剂上的SCR反应起到重要作用.同时,催化剂上吸附态NOx对于NOx的转化也起到一定作用.