钠硼解石——水体系溶解和相平衡的研究(英)

Ulexite dissolution in water has been studied in the wide temperature range from 10℃ to 93℃ and two higher temperatures at 120 ℃ and 240 ℃. The analytical results showed that ulexite dissolved congruently from 10 ℃ to 35 ℃ and incongruently from 40 to 68 ℃. The solid component of ulexite, NaCaB₅O₆(OH)₆·5H₂O was dehydrated to form NaCaB₅O₆(OH)₆·H₂O from 50 to 68 ℃ and finally amorphous solid at 68 ℃. This amorphous solid converted into priceite at 71 ℃ and then converted completely to priceite at the boiling point(93℃) of the solution. At both 120 and 240 ℃, the dissolution of ulexite was an incongruent process. Above 120 ℃, ulexite became amorphous solid and then transformed into priceite. In addition to the solid to solid transformation, crystallization of priceite from the solution has also been observed. Based on our experimental results, mechanisms of dissolution, transformation, and crystallization of borate in ulexite-water system are discussed.     

流体熵相关性质的Monte Carlo模拟新方法

提出了用于计算实际体系熵相关性质的Monte Carlo多级取样分子模拟方法. 应用这一方法, 对硬球流体的化学势及Helmholtz自由能进行了估算, 得到了满意的结果. 计算化学势时, 不存在通常试验粒子方法所遇到的高密度问题. 该方法特别适合规律性的系统研究, 较之普通模拟方法要有效得多. 模拟得到的硬球体系无限稀释组份的超额化学势与对比直径的关系, 在相变区域为一条双凹曲线; 无论是在相变区还是在单相区, Carnahan-Starling公式对这一关系的描述均有较大偏差.     

铯榴石硫酸浸出提取铯盐工艺研究

简述了铯榴石提铯工艺的概况, 确定了铯榴石硫酸法生产铯盐的工艺, 研究了铯榴石硫酸浸出的主要工艺的条件, 优化选择了硫酸浸出的最佳条件, 为工业化生产提供了可靠的依据.     

改性累托石吸附水溶液中苯酚的研究I吸附条件的确定

用十二烷基二甲基苄基氯化铵 (1227)、十六烷基三甲基溴化铵 (1631)、十八烷基三甲基溴化铵 (1831) 3种表面活性剂改性天然累托石 (REC) 粘土,分别得到3种有机改性累托石:1227-REC、1631-REC和1831-REC。用有机改性累托石作吸附剂,对水溶液中的苯酚进行吸附研究,考察了pH值、吸附时间、吸附剂用量、温度等因素对吸附效果的影响。结果发现,在本文研究条件下,3种吸附剂对苯酚达到较理想吸附效果的合理条件是:pH值分别为6、8、8;吸附平衡时间分别需要90、20、40min;吸附剂用量均为20g/L;常温。在确定的合理条件下,去除率分别能达到66.2%、99.0%、99.8%。     

钠硼解石碳化机理的研究

采用Ｃａ（２＋）选择电极，ｐＨ电极和电导电极对钠硼解石水溶液碳化过程进行跟踪测定。实验结果表明：反应分二步进行，反应最终结果是钠硼解石完全分解，硼全部进入溶液并大部分以Ｈ３ＢＯ３的形式存在，同时考察了温度，气流量对钠硼解石水溶液碳化结果的影响。根据碳化机理，提出了较佳的碳化条件。     

Synthesis and Investigation of Soluble Polymer-supported Dendrimers

Poly（ethylene glycol） （PEG）-supported dendrimers have been synthesized using 2.4,6-trichloro-1,3,5-triazine （TCT） as dendrons and tris（hydroxymethyl）aminomethane as tinkers with high loading capacity, excellent solubility and thermal stability by divergent method. The new synthesized PEG-supported G2.0 dendrimer has 10 times as large functional group loading capacity as commercial PEG3400 with overall yield 44.0%.     

Analysis and Protection of One Thousand Hand Buddha in Dazu Stone Sculptures

The components of the rock, the pigments, the gold foils and the adhesive of One Thousand Hand Buddha in Dazu stone sculptures, Chongqing, China, have been analyzed by X-ray diffraction (XRD), X-ray fluorescence (XRF), infrared spectroscopy (IR), energy dispersive X-ray analysis (EDX) and fiber optics reflectance spectroscopy (FORS). Furthermore, the weathering and degeneration of One Thousand Hand Buddha have been discussed and the protective methods have been provided. In this work some useful information to study on conservation of stone relics is given.     

Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is （28.795 ± 0.182） kJ/mol （298.15 K）, and the standard molar enthalpy of formation of the title complex is （-2185.43 ± 13.80） kJ/mol （298.15 K）. Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction： an nth-order reaction （Fn） with n=4.28, E1=147.35 kJ/mol, A1=3.63×10^13 s^-1 is followed by a second-order reaction （F2） with E2=212.71 kJ/mol, A2= 1.82 × 10^18 s^-1.     

累托石/聚丙烯插层纳米复合材料的制备与性能

采用熔融共混法制备了有机改性累托石 (OREC)粘土 均聚聚丙烯 (PP)纳米复合材料 ,以X 射线衍射分析 (XRD)及透射电子显微镜分析 (TEM)观察了复合材料的相貌结构 ,研究了复合材料的力学性能及热性能 .结果表明 ,OREC在添加份数较少时可与均聚聚丙烯熔融插层形成插层型聚丙烯纳米复合材料 ,该复合材料与纯PP相比 ,具有较高的拉伸强度、断裂伸长率及冲击强度 .在有机粘土添加 2 %时 ,复合材料的拉伸强度、断裂伸长率、冲击强度最高 ,与纯PP相比 ,2 %添加量的聚丙烯纳米复合材料拉伸强度提高 6 5 7% ,断裂伸长率提高 2 89 3% ,冲击强度提高 14 1% ,10 %失重率时对应的热分解温度提高 50K .     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].