钇对IMI829钛合金及Ti—14Al—21Nb合金显微组织和性能的影响

采用光学显微镜、扫描电和力学性能测试设备，研究了在ＩＭＩ８２９和Ｔｉ－１４Ａｌ－２１Ｎｂ合金中添加Ｙ，对合金显微组织遥影响。结果表明，在ＩＭＩ８２９和Ｔｉ－１４Ａｌ－２１Ｎｂ合金中添加Ｙ，可以细化这两种合金的组织和晶粒，使ＩＭＩ８２９－０．２Ｙ合金获得良好的室温力学性能和５５０℃蠕变性能，ｗｇｋｑＴｉ－１４Ａｌ－２１Ｎｂ－０．１Ｙ合金的高温力学性能得到改善。     

不饱和类锗烯H2C=GeNaBr的密度泛函理论研究

应用密度泛函理论DFT方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类锗烯H2C=GeNaBr的结构及异构化反应.结果表明,不饱和类锗烯H2C=GeNaBr有3种平衡构型,其中非平面的p-配合物型构型能量最低,是其存在的主要构型.并对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒,预言了最稳定构型的振动频率和红外强度.     

苯芴酮分光光度法测定有机锗饮料中的锗

介绍了测定有机锗饮料中的锗的苯芴酮分光光度法。     

Y2O3薄膜处理对3Cr25Ni7N合金的抗高温氧化性能的影响

采用电沉积-热解法在3Cr25Ni7N合金表面制备了Y2O3薄膜,并研究了薄膜处理对合金在1000℃空气中的抗高温氧化性能的影响。氧化动力学曲线、SEM及XRD分析结果表明,Y2O3薄膜处理使合金表面氧化膜以尖晶石结构为主,氧化膜致密,有效地抑制了Cr2O3的挥发反应,且氧化膜与基体的附着性好,因此合金在高温下的抗氧化性能得到提高,这与氧化钇薄膜在较低温度下抗高温氧化性能提高的机制是不同的。在不同温度下,Y2O3薄膜处理均可以有效提高合金的抗高温氧化性能。     

稀土改善锌基合金抗蚀性的实验研究

研究了稀土元素对锌基合金在95℃水蒸汽和NaCl水溶液中抗蚀性的影响。结果表明,稀土元素能明显提高锌基合金的抗蚀能力,而它和钛的复合加入可大幅度提高其抗蚀能力,并可基本上抑制合金在使用过程中的“失效”现象。     

Use of Silicon Substituents in the Syntheses of Natural and Non-natural Molecules

Trimethylsilyl groups have been used in our research as a director as well as a bulky and lipophilic group in our quest for natural and non-natural molecules.     

Phenylsulfonic Acid Functionalized Mesoporous Silica Catalyzed Transetherification of Alcohols with Dimethoxymethane

Phenylsulfonic acid functionalized mesoporous silica was synthesized by condensation of tetraethylorthosilicate with phenyltrimethoxysilane, and then sulfonation using 30% fuming sulfuric acid. The material was characterized using FT‐IR, DSC, XPS, TEM and N2 adsorption/desorption measurements. DSC revealed that sulfonic acid group of the catalyst was decomposed at 354.8°C, indicating that the catalyst exhibited high thermal stability. XPS showed that there existed three kinds of different silicon species on surface of the catalyst. The catalytic performance of the catalyst was evaluated using transetherification of alcohols with dimethoxymethane. It was found that among primary alcohols, the selectivities of the two long‐chain alcohols for n‐dedocanol and n‐tetradecyl alcohol were higher than 97.0% at the conversions of 43.6% and 65.3%, respectively, while the selectivities of the short‐chain alcohols except for n‐hexanol were less than 90.0% at the conversions of over 80.0%. Due to steric barrier, the secondary alcohols such as iso‐butanol and cyclohexanol afforded conversions of 79.4% and 60.5%, and the selectivities of the two alcohols were more than 90.0%. The sequence in conversion of the substituted phenols is as follows: p‐nitrophenol>p‐fluorophenol≥p‐bromophenol>p‐cresol>m‐cresol.     

巯基葡聚糖凝胶分离富集吸光光度法测定微量锗的研究

研究了在溴化十六烷基三甲基铵存在下锗与邻硝基苯基荧光酮的显色反应.结果表明,在HCl介质中,锗与邻硝基苯基荧光酮形成了灵敏度很高的络合物,其ε=1.86×105L·cm-1,组成比Ge(Ⅳ)邻硝基苯基荧光酮=13,采用巯基葡聚糖凝胶(SDG)分离富集,使方法的选择性得到了提高,可用于多种样品中痕量锗的测定,结果满意.     

强冲击加载条件下的钨合金的界面研究

借助定量金相、扫描电子显微镜、透射电子显微镜等微观分析手段对钨质量分数为９３％的钨合金在１５～５０ＧＰａ冲击压力下微观结构响应性态进行了考察，发现了一些钨合金所特有的现象，即钨颗粒与粘结相交界处出现成分迁移，新相析出；并结合断口分析，探讨了钨合金在冲击作用下发生断裂的微观特征与韧脆转化间的关系及其物理本质。     

电化学法测定几种稀土贮氢合金的热力学函数

贮氢材料由于能可逆地吸放氢,得到了广泛地应用.特别是以贮氢材料为负极制成的氢镍二次电池,容量为同类型镉镍电池的1.5～2倍,且电压又相近,是镉镍电池的理想换代产品,受到人们普遍的关注。LaNi_(4.5)Mn_(0.5),LaNi_(4.9)Sn_(0.1)和La_(0.8)Nd_(0.2)Ni_(2.5)Co_(2.4)Al_(0.1)是电化学性能较优越的贮氢合金。LaNi_(4.5)Mn_(0.5)的电化学容量高,理论容量可达400mAh.g~(-1).LaNi_(4.9)Sn_(0.1)和La_(0.8) Nd_(0.2)