颗粒增强复合材料热应力分析的双层嵌套模型

建立了一个把增强颗粒球和基体空心球嵌入等效复合介质空腔中的“双层嵌套模型”,研究了颗粒增强材料自高温冷却下来时,不同相中热应力的分布特点。推出了热应力在弹性和弹塑性状态的各种表达式。研究表明,随着温度降低,增强体受到压应力,基体材料中存在的静水应力为拉应力。温度继续下降,将出现自增强颗粒与基体界面向外扩展的屈服区。随增强相体积分数增大,增强颗粒受到的压应力和基体中的静水拉应力减小,增强颗粒与基体界面屈服的起始温差增大,而基体材料全面屈服的温差却减小。     

煤颗粒燃烧破碎特性及其分数维理论

本文采用激光衍射法和光学显微计算机图像系统及自行开发的软件,测量了三个典型煤在快速加热初期燃烧、等温加热燃烧和火焰燃烧方式的颗粒尺寸,运用分数维理论,建立了煤燃烧颗粒破碎理论,实验和理论研究揭示了煤燃烧中颗粒尺寸变化的本质,理论计算和实验结果符合良好。     

Structural Phase Transformations of ZnS Nanocrystalline Under High Pressure

In-situ energy dispersive x-ray diffraction on ZnS nanocrystalline was carried out under high pressure by using a diamond anvil cell. Phase transition of wurtzite of 10nm ZnS to rocksalt occurred at 16.0GPa, which was higher than that of the bulk materials. The structures of ZnS nanocrystalline at different pressures were built by using materials studio and the bulk modulus, and the pressure derivative of ZnS nanocrystalline were derived by fitting the equation of Birch-Murnaghan. The resulting modulus was higher than that of the corresponding bulk material, which indicates that the nanomaterial has higher hardness than its bulk materials.     

Acoustic scattering from multiple spheres by using a kind of addition formulae for the spherical wave functions

A kind of addition formulae for the spherical wave functions is generated by using the bicentric expansion of Green function in spherical coordinates. For an acoustical system with multiple spheres, the addition formulae permit the field expansions all referred to the center of one of the spheres, whose boundary conditions can be consequently used to study the multiple scattering easily. The two-sphere acoustical system with different boundary conditions is considered and the field scattered by each sphere can be obtained by solving an infinite set of two linear, complex, algebraic equations, whose coefficients are coupled through double sums in the spherical wave functions. Finally, the form functions of two spheres insonified by a plane wave at arbitrary angles of incidence are calculated and the addition formulae presented are validated by comparing the corresponding numerical results with those of the existing literature.     

GLOBAL WEAK SOLUTIONS OF THE RELATIVISTIC VLASOV-KLEIN-GORDON SYSTEM IN TWO DIMENSIONS

In this paper we consider the system of classical particles coupled with a Klein-Gordon field in two dimensions.We establish a-priori-bounds on the solutions of this system with initial data satisfying a size restriction derived from conservation of energy.This result,together with the smoothing of"velocity averaging",yields the existence of global weak solutions to the corresponding restricted initial value problem.The size restriction is necessary since energy of the system is indefinite.Finally,we show that the weak solutions preserve the total mass.     

PERMANENCE AND GLOBAL STABILITY TO A NONAUTONOMOUS NONLINEAR DISCRETE SINGLE SPECIES SYSTEM

In this paper,we study some permanence and global stability to a nonau- tonomous nonlinear discrete single species system,and obtain some sufficient condition of global stability to the system.     

Preparation and Optical Properties of SnO2／SiO2 Nanocomposite

SnO2/SiO2 nanocomposites have been prepared by the soaking-thermal-decomposing method, tin oxide nanoparticles are uniformly dispersed in the mesopores of silica. The optical absorption edge of the obtained nanocomposite presents a redshift compared with bulk tin oxide, With the increasing annealing temperature during the procedure of the sample preparation, the optical absorption edge of the sample moves to shorter wavelength (blueshift). These optical properties can be ascribed to the amorphous structure and band defects of surface layers of the tin oxide nanoparticles.     

纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

混凝土靶球形腔膨胀侵彻模型应用

Bishop等人于1945年开始用解析方法研究侵彻机理，导出了柱形腔和球形腔的准静态v膨胀方程，后来这种方法被称为空腔膨胀理论。目前，空腔膨胀理论已经在多种不同材料靶的侵彻研究中获得较为普遍的应用。Forrestal等人于1997年提出了一个适用于混凝土材料靶的球对称空腔膨胀侵彻模型，模型对靶结构的描述是将其压力与体积应变的关系理想化为不可压或线性可压，而将剪切强度与压力的关系理想化为由一拉伸阈值表示的Mohr-Coulomb准则。