食品玻璃化转变温度测量方法的比较

利用差示扫描量热仪用经过退火处理的连续扫描法、不经过退火处理的连续扫描法和分步扫描法,对20％和50％蔗糖水溶液的玻璃化转变温度进行了测量。结果显示,退火处理的连续扫描法测量结果最好,测得蔗糖水溶液的玻璃化转变温度大致为-34．6℃,Tg'不受退火温度和溶液浓度的影响。三种方法测得20％蔗糖水溶液的Tg'的差别不大。退火方法和不退火方法测得50％蔗糖水溶液的Tg'差别很大。用两种不同的连续扫描方法做了几组测新鲜西瓜汁玻璃化转变温度的实验,结果在-42--44℃之间。     

高温超导圆柱在不同脉冲宽度磁场作用下的温度和磁场分析

多脉冲分段冷却磁化技术是获得强俘获磁场的一种有效方法,近年来受到广泛关注,脉冲磁场的幅值和宽度是影响该方法的两个重要因素。文中通过求解基本的超导电磁场和温度场耦合方程,研究了两种不同脉冲宽度情形下脉冲磁化过程中超导体磁场和温度场的变化。结果表明,宽脉冲作用下超导体在磁化过程中温度较低,分布均匀,而且有更多磁通进入超导体。     

Determination of Thermal Conductivity of Liquids by a Multi-Point Laser Pump Method

As an advanced optical method, a multi-point pump method is presented for measurements of thermo-physical properties of liquids. Meanwhile, based on the laser-induced thermal grating method, a new theory model is presented and used to analyse the thermal effects caused by the multi-point laser pump, by which the thermal conductivity of liquids can be obtained. The results of some typical liquids, such as water, ethanol and acetone, are presented and are consistent with those of acknowledged values, demonstrating that the multi-point method is simple and useful for characterizing thermal properties of liquids.     

再生冷却红外窗口热响应特性耦合计算研究

本文对强对流加热环境下带再生冷却系统的红外窗口传热和热应力问题进行了数值模拟,采用一维管流假设,管流和固体结构传热采用耦合方式求解.研究表明:(1)在本文计算状态下模型温度和热应力都是随加热时间而增加的,最大温度发生在窗口表面的填充材料和石英玻璃中部,最大热应力发生在合金材料内部;(2)现有冷却管道配置下工质温度没有异常变化;(3)窗口区合金温度一直在升高,若飞行时间进一步延长,要考虑合金温升给窗口防热带来的不利影响;(4)在现有温度分布状态下,内冷管道的引入并未给结构强度造成薄弱环节.     

热激励器对超音速自由射流流动特性的影响EI北大核心CSCD

本文研究热激励器对超音速自由射流流动特性的影响,用S-A湍流模型得到马赫数为1.3的自由射流的准稳态流场,然后用LES方法模拟热激励器的热效应对射流流场不同区域的激励作用。文中讨论了持续式加热和脉动式加热对超音速剪切层涡发展的不同影响。前者通过提高局部区域温度,影响自由射流流场结构和超音速剪切层的涡结构;后者则通过凹槽内的脉动式热效应,产生压力扰动作用于主流场来改变涡的发展特性。     

Influence of Rashba SOI and Polaronic Effects on the Ground-State Energy of Electrons in Semiconductor Quantum Rings

The influence of Rashba spin-orbit interaction （SOI） and polaronic effect on the ground-state energy of electrons in semiconductor quantum rings （QRs） are studied by means of the Lee-Low-Pines variational method. Numerical calculations for GaAs QRs are performed and the results show that the ground-state energy of electrons splits into two branches as E（↑） and E（↓） under the Rashba SOI, which correspond to the spin-up state and spin-down state, respectively. The contribution of the Rashba SOI effect to the ground-state energy of electrons is related to the spin state of electrons and is closely linked to the inner and outer radii of a QR. However, it is independent of the height of the QR. The ground-state energy of electrons decreases due to the polaronic effect in QRs. The energy shift ＆#8710;Ee-LO of the ground-state of the electron induced by the polaronic effect decreases monotonically with increase of the height of a QR and fluctuates with the changes of the radii of QRs. The amplitude of the fluctuation is very sensitive and remarkable to the changes of the inner radius R1 and the outer radius R2.     

光格中玻色-爱因斯坦凝聚的自旋磁子和自旋波北大核心CSCD

研究了一维光格中旋量玻色—爱因斯坦凝聚体的自旋磁子和自旋波.求出了自旋磁子和自发磁化强度.用经典方法求得了均匀体系的自旋波和能级以及激光调制下的自旋波和能级.特别是在连续极限近似下,求得了马丢函数波及其能级.     

Effects of oxygen vacancy location on the electronic structure and spin density of Co-doped rutile TiO2 dilute magnetic semiconductors

According to density functional theory （DFT） using the plane wave base and pseudo-potential, we investigate the effects of the specific location of oxygen vacancy （Vo） in a （Ti,Co）06 distorted octahedron on the spin density and magnetic properties of Co-doped rutile Ti02 dilute magnetic semiconductors. Our calculations suggest that the Vo location has a significant influence on the magnetic moment of individual Co cations. In the case where two Co atoms are separated far away from each other, when the Vo is located at the equatorial site of a Co-contained octahedron, the ground state of the two Co cations is d6（t3g↑, t23g ↓） without any magnetic moment. However, if the Vo is located at the apical site, these two Co sites have different ground states and magnetic moments. The spin densities are also observed to be modified by the exchange coupling between the Co cations and the location of Vo. Some positive spin polarization is induced around the adjacent O ions.     

Thermal Properties of Materials Characterized by Scanning Electron-Acoustic Microscopy

A modified technique of scanning electron-acoustic microscopy is employed to determine thermal diffusivity of materials. Using the dependence of the electron-acoustic signal on modulation frequency of the electron beam, the thermal diffusivity of materials is characterized based on a simplified thermoelastic theory. The thermal diffusivities of several metals characterized by the modified scanning electron-acoustic microscopy are in good agreement with the referential values of the corresponding materials, which proves that the scanning electronacoustic microscopy can be used to characterize the thermal diffusivity of materials effectively. In addition, for micro-inhomogeneous materials, such as biological tissues, the macro-effective （average） thermal diffusivities are characterized by the technique.     

托卡马克实验与工程——HL-2A装置上芯部弹丸加料中的电子热输运研究

从80年代中期开始，在许多聚变装置上观察到了用弹丸注入改善的等离子体能量约束。在JET和一些大型托卡马克上实现了弹丸增强约束模（PEP）。PEP模的机制也已在理论上做了分析。分析表明，有多种机制在减小反常输运中起作用，而这些机制的作用依赖于实验的条件。本文将报道在HL-2A装置上无辅助加热条件下的弹丸加料实验结果。该工作的着重点是研究在中心加料欧姆放电中的电子热输运。