钇对激光熔覆钴基合金组织和高温腐蚀性能的影响

系统研究了在2Cr13和1Cr18Ni9Ti钢表面激光熔覆并含钇的钴基合金层的组织和表面涂盐的高温腐蚀行为,同时着重探讨了钇的作用。结果表明,添加钇的钴基合金覆层组织更细密,且与基体结合牢固;在表面涂有75％Na_2SO_4+25％NaCl盐膜条件下,其耐高温腐蚀性能获得极大提高;添加0.874％Y后,其表面能形成连续致密的保护性氧化膜,可阻碍氧、硫的扩散浸入,使其性能更佳。同时,添加钇后,内氧化层浅而细密,对内层合金元素向外表面扩散迁移起屏障作用。     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

激光扫描电化学现场微区光电流图谱技术

讨论了所建立的激光扫描微区光电流图谱测试系统的若干问题及其应用研究实例。实验结果表明：该测试技术是现场研究半导体及具有半导体性质的金属氧化物微区光电化学性质的有力工具，它可以在微米水平上提供许多有关半导体／电解质溶液界面的结构和电子性质方面的重要信息。     

Matrix Effects and Behaviors of Elements in Oxalic Acid Medium by Inductively Coupled Plasma Mass Spectrometry

Because of its high sensitivity, wide dynamic range and relative freedom from interferences, inductively coupled plasma mass spectrometry (ICP-MS) has been developed for the determination of trace and ultra-trace levels of elements in various fields1. Due…     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

纳米Y2O3/钴基合金激光熔覆层的组织

利用5 kW CO2激光器,在Ni基高温合金表面,熔覆纳米稀土氧化物(Y2O3)/钴基合金复合材料,制备了涂层.利用光学显微镜、扫描电镜及透射电镜分析了熔覆层的组织结构.结果表明: 熔覆层的主要相组成为γ-Co,ε-Co,Cr23C6和Y2O3;加入纳米Y2O3,凝固组织由细长的柱状树枝晶转变为较短的树枝晶;纳米Y2O3含量增大至1%时整个断面获得等轴晶组织;纳米Y2O3作为异质形核的核心,细化了组织;纳米Y2O3在熔覆层中分布不均匀,促进了γ-Co向ε-Co的转变;熔覆层的亚结构为堆跺层错.对熔覆层等轴组织形成机制进行了分析.     

A Novel Method for Quantification of Circulating DNA in Serum by Capillary Zone Electrophoresis

In this paper, we first presented a novel method for quantification of circulating DNA in human serum based on capillary zone electrophoresis with laser-induced fluorescence detection (CZE-LIF). The serum was digested by proteinase to release free DNA, and then CZE-LIF system was used for the quantification of total circulating DNA. This method was successfully used to quantify the circulating DNA levels in sera from healthy individuals and certain cancer patients.We found the significantly elevated circulating DNA levels in certain prostate cancer patients. Our results demonstrated that CZE-LIF system has good linearity, excellent sensitivity (0.5 ng/mL DNA),satisfactory reproducibility (RSDs in one day and between days were both less than 5%) and reliability, and is well suitable to the quantification of the circulating DNA in human serum or plasma.     

一种液晶环氧树脂固化中扩散控制动力学研究

根据扩散控制反应的基本原理 ,建立了合适的反应模型 ,描述了 4 ,4′ 二 ( 2 ,3 环氧丙氧基 )偶氮苯(DGEAP) / 4,4′ 二氨基二苯甲烷 (DDM)环氧树脂的固化行为 .该模型认为 ,随着环氧基团反应程度的提高 ,基团的反应半径将受到影响 .当体系中出现了介晶基元的有序排列时 ,与之相连的反应基团的分布也受到影响 ,有序区内的局部浓度将变大 ,产生假浓度效应 ,并最终影响扩散控制反应动力学 .通过与普通环氧树脂固化动力学的比较 ,证实了这一效应 .     

Solution Structure and Behavior of Benzophenone-based Achiral Bisphosphine Ligands in Noyori-Type Ru（Ⅱ）-Catalysts

We herein report on solution structural studies of Ru^Ⅱ catalysts （3a, 9） composed of achiral bisphosphine ligands （4, 8） and the enantiopure 1,2-diphenylethylenediamine （DPEN）. Complete chiral induction from enantiopure （R,R）-DPEN to achiral bisphosphine ligand 3a was observed in solution, with the complex adopting a single, stable and non-fluxional （even at 70 ℃） configuration. The coordination of the C=O moiety in 4 to the cationic Run center is considered to be of key importance in providing the higher thermodynamic and kinetic rotation barrier for the flexible bisphosphine ligand in the complex. The obtained enantioselectivity （91% enantiomeric excess） and sense of chiral induction in the hydrogenation of acetophenone were found to be solely dependent on the chirality of the 1,2-diamine. Consistent with the hydrogenation product, the （R,R）-DPEN induces a M-conformation （fight-handed） chirality for flexible phosphine ligand 4 in the complex, resulting in a 2,2-configuration about the Ru^Ⅱ center.     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.