DNA纤维的X射线衍射分析与双螺旋结构的发现

概述了DNA化学结构式确立的过程,介绍了x射线衍射分析的概念、原理和方法,阐述了物理学家威尔金斯和物理化学家富兰克林在用实验事实证明DNA双螺旋结构方面所作出的巨大贡献。     

Hybrid phononic crystal plates for lowering and widening acoustic band gaps

We propose hybrid phononic-crystal plates which are composed of periodic stepped pillars and periodic holes to lower and widen acoustic band gaps. The acoustic waves scattered simultaneously by the pillars and holes in a relevant frequency range can generate low and wide acoustic forbidden bands. We introduce an alternative double-sided arrangement of the periodic stepped pillars for an enlarged pillars’ head diameter in the hybrid structure and optimize the hole diameter to further lower and widen the acoustic band gaps. The lowering and widening effects are simultaneously achieved by reducing the frequencies of locally resonant pillar modes and prohibiting suitable frequency bands of propagating plate modes.     

Step structure on the fivefold Al-Pd-Mn quasicrystal surface, and on related surfaces

We compare step morphologies on surfaces of Al-rich metallic alloys, both quasicrystalline and crystalline. We present evidence that the large-scale step structure observed on Al-rich quasicrystals after quenching to room temperature reflects equilibrium structure at an elevated temperature. These steps are relatively rough, i.e., have high diffusivity, compared to those on crystalline surfaces. For the fivefold quasicrystal surface, step diffusivity increases as step height decreases, but this trend is not obeyed in a broader comparison between quasicrystals and crystals. On a shorter scale, the steps on Al-rich alloys tend to exhibit local facets (short linear segments), with different facet lengths, a feature which could develop during quenching to room temperature. Facets are shortest and most difficult to identify for the fivefold quasicrystal surface.     

用偏光织构及透射光谱分析液晶器件的老化

对一组台式计算器液晶显示器进行了光辐照,研究了光辐照对液晶显示器件显示品质的影响。采用偏光显微镜观察到了辐照后液晶的偏光织构的变化,液晶中出现了平行的条纹状织构和失去消光作用的黑洞,随着接受光辐照时间的增加,黑洞数量越来越多,面积越来越大。通过由计算机控制的双光束紫外-可见分光光度计测试了透射光谱的变化,发现其透射率随着接受光辐照时间的增加而降低。分析结果表明,条纹状织构和黑洞的出现是由于液晶分子结构在紫外线的照射下发生了变化所致,失去消光作用的黑洞是导致液晶器件透射率持续下降的主要原因。     

On the vibrational behaviour of cyanide adsorbed at Pt(1 1 1) and Pt(1 0 0) surfaces in alkaline solutions

This communication deals with the vibrational behaviour of cyanide adlayers formed on Pt(1 1 1) and Pt(1 0 0) surfaces in the electrochemical environment. In situ FTIR spectroscopy can be employed to follow the potential dependence of the C-N stretching frequency in acidic electrolytes with quite a low uncertainty. Owing to the stability of the cyanide adlayer in alkaline solutions, experiments performed in NaOH medium are usually perturbed by the significant overlapping of the reference and the sample FTIR spectra. Deconvolution of the spectra was carried out assuming a Lorentz oscillator. The procedure allowed to confirm that two potential regions with different band centre frequency tuning coexist for Pt(1 1 1)-CN in perchloric acid medium. Conversely, in the alkaline electrolyte a single tuning rate for the band position was found for both surfaces studied. The lack of reorientation of the C-N molecular axis together with the occurrence of a certain screening effect of negatively charged hydroxyl anions on the electric field at the interface could be at the origin of the different behaviour displayed in both electrolytic media.     

Self-regulated Ni cluster formation on the TiO2(1 1 0) terrace studied using scanning tunneling microscopy

We have studied the growth mode and morphology of Ni clusters on a TiO₂(1 1 0) surface with a wide terrace using scanning tunneling microscopy (STM) at a low coverage (less than 3 atoms nm⁻²). The Ni clusters are formed on the terrace at the low coverage of 0.2 atoms nm⁻². Their average dimensions are constant in three directions up to 1 atoms nm⁻². The Ni clusters have an oval shape with average sizes of 1.8 nm (along [0 0 1]) × 1.4 nm (along (in the [1 1 0] directions). Above the coverage of 1.0 atoms nm⁻², an increase in the cluster height occurs, retaining an almost constant lateral size. It is proposed that the interaction of the Ni cluster and the support surface regulates the Ni cluster size.     

Expected thermal deformation and wavefront preservation of a cryogenic Si monochromator for Cornell ERL beamlines

Cornell energy‐recovery linac (ERL) beamlines will have higher power density and higher fractional coherence than those available at third‐generation sources; therefore the capability of a monochromator for ERL beamlines has to be studied. A cryogenic Si monochromator is considered in this paper because the perfect atomic structure of Si crystal is needed to deliver highly coherent radiation. Since neither the total heat load nor the power density alone can determine the severity of crystal deformation, a metric called modified linear power density is used to gauge the thermal deformation. For all ERL undulator beamlines, crystal thermal deformation profiles are simulated using the finite‐element analysis tool ANSYS, and wavefront propagations are simulated using Synchrotron Radiation Workshop. It is concluded that cryogenic Si monochromators will be suitable for ERL beamlines in general.     

Birefringence,dispersion and loss properties for PCFs with rectangular air-holes

In this paper, the solid-core fiber designs constructed by omitting one air-hole at the center of square-lattice silica photonic crystals with rectangular shaped air-holes have been investigated theoretically and their characteristics have been compared with those of square ones. Using commercial simulation software, birefringence, dispersion, numerical aperture and confinement loss of the fundamental modes are analyzed.     

Design of a compact polarization splitter based on the dual-elliptical-core photonic crystal fiber

We propose a compact polarization splitter based on dual-elliptical-core photonic crystal fiber. Two elliptical cores are introduced to increase the difference of effective index between x-polarized and y-polarized mode and three elliptical modulation air holes are used to control the power transfer between the two cores. By optimizing the structure parameters, the length of the polarization splitter is distinctly shortened. Numerical results demonstrate that the compact splitter has the length of 775 μm and up to 50 dB extinction ratio at the central wavelength of 1.55 μm. The corresponding bandwidth of 32 nm could be achieved from the wavelength of 1.534–1.566 μm with the extinction ratio over 20 dB