CsOH-promoted epoxide ring-opening with phosphines: mild and efficient synthesis of monohydroxyphosphines

A mild and convenient synthesis of monohydroxyphosphines has been achieved by epoxide ring-opening using primary or secondary phosphines in the presence of cesium hydroxide, 4 Å molecular sieves and DMF at room temperature. These reaction conditions were found to be highly regio- and stereoselective producing various monohydroxyphosphines exclusively in moderate to high yields.     

Studies on Colloidal Properties of Mixed Metal Hydroxide－Clay Aqueous Suspension

ＳｔｕｄｉｅｓｏｎＣｏｌｌｏｉｄａｌＰｒｏｐｅｒｔｉｅｓｏｆＭｉｘｅｄＭｅｔａｌＨｙｄｒｏｘｉｄｅ－ＣｌａｙＡｑｕｅｏｕｓＳｕｓｐｅｎｓｉｏｎＮＯＵｗａｎ－ｇｕｏ；ＺＨＡＮＧＣｈｕｎ－ｇｕａｎｇ；ＳＵＮＤｅ－ｊｕｎ；ＨＡＮＳｈｕ－ｈｕａａｎｄＷＡＮＧ...     

A Novel Zirconium-Based Perovskite-Type Membrane Material for Oxygen Permeation

Zirconia with fluorite structure stabilized by doping rare earth or alkaline earth metal oxides such as Y2O3 and CaO (YSZ and CSZ) is a class of traditional mixed conducting membrane materials, which have been widely investigated for their high oxygen ionic conductivity and excellent chemical and thermal stability1-3. But the electronic conductivity of these materials is very small, unless operated with an internal or external circuitry, the oxygen flux through membranes in usual ranges of …     

磷酸铜锆催化剂上醇选择性氧化（英文）

The catalytic activity of copper zirconium phosphate(ZPCu) in the selective oxidation of alcohols to their corresponding ketones or aldehydes, using H2O2 as an oxidizing agent, was studied. The oxida‐tion reaction was performed without any organic solvent, phase‐transfer catalyst, or additive. Steric factors associated with the substrates influenced the reaction. The catalyst was characterized using X‐ray diffraction, inductively coupled plasma atomic emission spectroscopy, energy‐dispersive X‐ray spectroscopy, and scanning electron microscopy. It was shown that the interlayer distance increased from 0.74 to 0.80 nm and the crystallinity was reduced after Cu2+ intercalation into the layers. This catalyst can be recovered and reused three times without significant loss of activity and selectivity.     

Estimation of the solubility product of hydrocalumite–hydroxide,a layered double hydroxide with the formula of [Ca2Al(OH)6]OH·nH2O

From aqueous NaOH/Ca(OH)₂/NaAl(OH)₄ mixtures, after allowing short reaction times we observed the precipitation of Ca(OH)₂(s) at lower, and a mixture of Ca(OH)₂(s) and a layered double hydroxide, hydrocalumite (HC) at higher aluminate concentrations. From the maximum aluminate concentration, at which the equilibrium solid phase is still portlandite (i.e., further increase in the aluminate concentration results in HC appearing in the precipitate beside the portlandite), the concentration based solubility products of two polymorphs of HC with the formula of [Ca₂Al(OH)₆]OH·nH₂O (differing in n) has been estimated and was found to be log L_HC=−11.4 at 25 °C and −12.1 at 75 °C, respectively (where L_HC=[Ca²⁺]²[Al(OH)₄⁻][OH⁻]³) and at constant ionic strength (I=1 M NaCl). To the best of our knowledge, this is the first published estimate for the solubility product of hydrocalumite. Additionally, from the composition obtained for NaOH/Ca(OH)₂/NaAl(OH)₄ mother liquors in equilibrium with Ca(OH)₂(s), attempts were made to extract the formation constant of the ion pair CaAl(OH)₄⁺. It was found, that the effects caused by the supposed formation of this solution species are too small to be reliably determined, which allowed an upper estimate for its formation constant, K, to be suggested in the temperature range of 25–75 °C (K<200 and 40 M⁻¹ at 25 and 75 °C, respectively).     

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

The effectiveness of Congo red (CR) adsorption from aqueous solutions onto MgAl-layered double hydroxide (MgAl-LDH) nanosorbents was examined in this study. MgAl-LDH was synthesized using the hydrothermal method, and physicochemical characterization was performed via powdered X-ray diffraction, high-resolution transmission electron microscopy, Fourier transform infrared analysis, and zeta potential measurements. For optimum adsorption of CR onto the synthesized MgAl-LDH nanosorbent, the adsorption process was employed in batch experiments. Adsorption parameters, such as the adsorbent dosage, solution pH, contact time, and initial adsorbate concentration, vary with the adsorption kinetics and isotherm mechanism. The results of the batch experiments indicated rapid adsorption of CR dye from aqueous solutions onto MgAl-LDH during the first 30 min until equilibrium was achieved at 180 min with a dye concentration of 50 mg/100 mL and MgAl-LDH adsorbent dosage of 0.05 g. The experimental adsorption data fit adequately with the monolayer coverage under the Langmuir isotherm model (R² = 0.9792), and showed the best fit with the pseudo-second-order kinetic model (R² = 0.996). The change in zeta potential confirmed the effective adsorption interaction between the positively charged MgAl-LDH and the negatively charged CR molecules with electrostatic interactions. This work is distinguished by the successful hydrothermal preparation of MgAl-LDH in the form of homogenous nanoscale particles (～100 nm). The prepared MgAl-LDH showed a high adsorption capacity toward anionic CR dye with a maximum adsorption capacity of 769.23 mg/g. This capacity is higher than those reported for other adsorbents in previous research.     

A Porous Sulfonated 2D Zirconium Metal–Organic Framework as a Robust Platform for Proton Conduction

By using the strategy of pre-assembly chlorosulfonation applied to a linker precursor, the first sulfonated zirconium metal–organic framework ( JUK-14 ) with two-dimensional (2D) structure, was synthesized. Single-crystal X-ray diffraction reveals that the material is built of Zr₆O₄(OH)₄(COO)₈ oxoclusters, doubly 4-connected by angular dicarboxylates, and stacked in layers spaced 1.5 nm apart by the presence of sulfonic groups. JUK-14 exhibits excellent hydrothermal stability, permanent porosity confirmed by gas adsorption studies, and shows high (>10⁻⁴ S/cm) and low (<10⁻⁸ S/cm) proton conductivity under humidified and anhydrous conditions, respectively. Post-synthesis inclusion of imidazole improves the overall conductivity increasing it to 1.7×10⁻³ S/cm at 60 °C and 90 % relative humidity, and by 3 orders of magnitude at 160 °C. The combination of 2D porous nature with robustness of zirconium MOFs offers new opportunities for exploration of the material towards energy and environmental applications.     

Lattice engineering route for self-assembled nanohybrids of 2D layered double hydroxide with 0D isopolyoxovanadate: chemiresistive SO2 sensor

Tuning the interior chemical composition of layered double hydroxides (LDHs) via lattice engineering route is a unique approach to enable multifunctional applications of LDHs. In this regard, the exfoliated 2D LDH nanosheets coupled with various guest species lead to the lattice-engineered LDH-based multifunctional self-assembly with precisely tuned chemical composition. This article reports the synthesis and characterization of mesoporous zinc–chromium-LDH (ZC-LDH) hybridized with isopolyoxovanadate nanohybrids (ZCiV) via lattice-engineered self-assembly between delaminated ZC-LDH nanosheets and isopolyoxovanadate (iPOV) anions. Electrostatic self-assembly between 2D ZC-LDH monolayers and 0D iPOV significantly altered structural, morphological, and surface properties of ZC-LDH. The structural and morphological study demonstrated the formation of mesoporous interconnected sheet-like architectures composed of restacked ZCiV nanosheets with expanded surface area and interlayer spacing. In addition, the ZCiV nanohybrid resistive elements were used as a room-temperature gas sensor. The selectivity of ZCiV nanohybrid was tested for various oxidizing (SO₂, Cl₂, and NO₂) gases and reducing (LPG, CO, H₂, H₂S, and NH₃) gases. The optimized ZCiV nanohybrid demonstrated highly selective SO₂ detection with the maximum SO₂ response (72%), the fast response time (20 s), low detection limit (0.1 ppm), and long-term stability at room temperature (27 ± 2 °C). Of prime importance, ZCiV nanohybrids exhibited moderately affected SO₂ sensing responses with high relative humidity conditions (80%–95%). The outstanding SO₂ sensing performance of ZCiV is attributed to the active surface gas adsorptive sites via plenty of mesopores induced by a unique lattice-engineered interconnected sheet-like microstructure and expanded interlayer spacing.     

Introduction of high valent Mo6+ in Prussian blue analog derived Co-layered double hydroxide nanosheets for improved water splitting

Herein, we report a facile method for synthesizing MoCo-layered double hydroxide (LDH) nanosheets employing Prussian blue analog (PBA) as the precursor. The introduction of Mo in Co-LDH modulates the electronic structure, increases the number of active sites and electrochemical surface area to improve the hydrogen evolution, oxygen evolution, and overall water splitting activity. As a result, PBA-derived Mo_0.25Co_0.75-LDH nanosheets demonstrated 10 mA cm^?2 current density at only 220 mV and 115 mV overpotentials for OER and HER, respectively. The overall water splitting was attained at 1.52 V cell voltage for 10 mA cm^?2 current density.     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.