Production of poly(methyl methacrylate) particles by dispersion polymerization with mercaptopropyl terminated poly(dimethylsiloxane) stabilizer in supercritical carbon dioxide

Poly(methyl methacrylate) (PMMA) particles were produced by dispersion polymerization of methyl methacrylate in the presence of mercaptopropyl terminated poly(dimethylsiloxane) (MP-PDMS) in supercritical carbon dioxide at about 30 MPa for 24 h at 65 °C. The particle diameter could be controlled in a size range of submicron to micron by varying MP-PDMS concentration. The MP-PDMS worked as not only a chain transfer agent but also a colloidal stabilizer, which was named tran stab.Part CCLI of the series Studies on suspension and emulsion     

Mo、W金属氧化物对CH4/CO2重整Ni基催化剂性能的影响

用XRD、XPS、元素分析、TEM和活性评价等方法研究过渡金属氧化物MoO3和WO3对SiO2负载的Ni基催化剂物理化学性质和CH4/CO2重整制合成气催化性能的影响.结果表明,在负载型的镍催化剂中,MoO3和WO3的添加一方面提高了Ni的核外电子密度,减弱了对CH4深度裂解积炭;另一方面使催化剂表面镍的相对浓度降低,结构上起到了隔离、分散金属颗粒的作用,氧的相对浓度升高,有效提高了催化剂的抗烧结和抗积炭能力,显示出较好的催化稳定性.     

复合半导体负载金属材料光催化性能研究

CO₂和烃类光催化直接合成烃类氧化物在合成化学、碳资源利用和环境保护等方面均有重大意义。用溶胶-凝胶和浸渍-还原相结合的方法制得M/V₂O₅-TiO₂(M=Pd、Cu、Ni和Ag)光催化剂。利用XRD、TPR、IR、TPD、UV-Vis DRS和光反应器等技术研究了负载金属复合半导体的物相结构、吸附性能、光吸收性能和光催化反应性能。结果表明：金属负载在复合半导体上延迟了TiO₂由锐钛矿向金红石相的转化,增强了V与载体TiO₂的相互作用,使TiO₂光吸收限发生蓝移,对可见光部分的吸收明显增加,拓宽了催化剂的光响应范围;材料吸光性能强弱顺序Pd/V₂O₅-TiO₂ >Cu/V₂O₅-TiO₂ >Ag/V₂O₅-TiO₂>Ni/V₂O₅-TiO₂;材料的吸附性能及反应物的吸附态是反应发生的关键,CO₂在Ag/V₂O₅-TiO₂表面无法形成卧式吸附态,没有目的产物甲基丙烯酸(MAA)生成,光量子效率低;光吸收性能较好的Pd/V₂O₅-TiO₂对CO₂吸附能力过强,卧式吸附态脱附温度高,光催化效率不高;Cu/V₂O₅-TiO₂对CO₂吸附能力适中,CO₂与C₃H₆脱附温度较接近,实现了“光-表面-热”的协同作用,光量子效率最高,达15.1%。     

溶剂聚合膜pH电极作内电极的气敏电极的研究

研究了以中性载体为活性物的石墨内导平头溶剂聚合膜(SPM)pH电极作内电极的二氧化碳和氨气敏电极。电极的性能取决于中性载体的特性,其中以菸酸十八酯为内电极膜活性物的二氧化碳气敏电极和以二辛基十八胺为活性物的氨气敏电极性能较佳。二氧化碳气敏电极用作丙酮酸脱羧酶酶电极的原电极,其性能院于传统的以玻璃pH电极作内电极的二氧化碳气敏电极。     

INFLUENCE OF DIALKYLZINC IN RARE-EARTH TERNARY CATALYST ON THE COPOLYMERIZATION OF CARBON DIOXIDE AND PROPYLENE OXIDE

Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.     

Zr-MCM-41的合成及其表征

以Zr(NO3)4·3H2O为锆源，通过直接合成法得到了Zr-MCM-41介孔材料，考察了不同Zr/Si摩尔比对样品的影响，其中Zr/Si的摩尔比最大为0.25。随着Zr/Si的摩尔比的增加，2θ=2°附近的100晶面的衍射峰强度逐渐降低，当Zr/Si摩尔比大于0.25后得不到介孔Zr-MCM-41材料。对所得样品采用XRD、TG-DTA、N2吸附 脱附几种分析方法进行了表征。     

Infrared Spectroscopy and Structure of Trigonal Zirconium Orthophosphates with Lanthanides and Actinides

Binary zirconium orthophosphates R_1/3Zr₂(PO₄)₃ and M_1/4Zr₂(PO₄)₃, where R = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, Lu; M = Th, U, have been synthesized and studied by IR spectroscopy [structural family of NaZr₂(PO₄)₃ (NZP)]. Vibrational analysis for the PO₄ tetrahedron and investigation of symmetry relations among trigonal NZP phases showed that ordering of lanthanide atoms in structures of NaZr₂(PO₄)₃ type with space group R c leads to symmetry reduced to P c. The lanthanide atoms occupy the 2b sites. The phosphorus atoms occupy two independent sites: 6f with C ₂ symmetry and 12g with C ₁ symmetry. Factor group analysis admits that the IR spectrum can contain eight v₃ bands and two v₁ bands of the stretching vibrations of the PO₄ ions. The M atoms of actinides occupy statistical positions in the structure, and space group R c is retained.Original Russian Text Copyright © 2004 by V. S. Kurazhkovskaya, D. M. Bykov, and A. I. Orlova__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 6, pp. 1013–1019, November–December, 2004.     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

Thermodynamic investigation of zirconium diselenite

Summary On the basis of calorimetric research of selenium dioxide, zirconium dioxide and zirconium diselenite dissolution reactions in the hydrofluoric acid solution under 298 K a standard enthalpy of Zr(SeO₃)₂ formation reaction from ZrO₂ and SeO₂ and a standard enthalpy of zirconium diselenite formation have been obtained. The value of enthalpy has been equal to -58.1±3.43 kJ mol^-1 in ZrO_2(solid)+2SeO_2(solid) Zr(SeO₃)_2(solid) reaction. The standard enthalpy of zirconium diselenite formation is equal to H_f,298⁰Zr(SeO₃)_2(solid)= -1603.2±3.8 kJ mol^-1. The H_f,298⁰ Zr(SeO₃)_2(solid) value has been determined for the first time.     

Germanium dioxide as internal standard for simplified trace determination of bromate, bromide, iodate and iodide by on-line coupling ion chromatography-inductively coupled plasma mass spectrometry

The use of elemental mass spectrometry as detection for ion chromatography allows sensitive determination of several bromine and iodine species at a reasonable time scale. Lowest concentrations observable are 66 ng L(-1) for bromate, 45 ng L(-1) for iodate, 74 ng L(-1) for bromide and 151 ng L(-1) for iodide. A major drawback of previous IC-ICP-MS applications is the high consumption of time and thus the running costs. The use of GeO2 as internal standard not only allows improved external calibration, but also semiquantitative determination of bromate, bromide, iodate and iodide without any calibration procedure. Furthermore, GeO2 can be used for all known types of anion exchange columns regardless of their construction principles. It is shown, that the analyte-to-GeO2 ratio of four bromine and iodine species was nearly constant over 4 months and almost independent from the ICP-MS instrumental settings. The quantification by means of the analyte-to-GeO2 ratio for samples taken from a bromate round robin test shows that the values obtained are in excellent agreement with calibration curve and isotope dilution results.