Traces of functions with a dominating mixed derivative in ℝ<Superscript>3</Superscript>

We investigate traces of functions, belonging to a class of functions with dominating mixed smoothness in ℝ³, with respect to planes in oblique position. In comparison with the classical theory for isotropic spaces a few new phenomenona occur. We shall present two different approaches. One is based on the use of the Fourier transform and restricted to p = 2. The other one is applicable in the general case of Besov-Lizorkin-Triebel spaces and based on atomic decompositions.     

电荷量子比特与量子化光场之间的纠缠

研究了初态为混合态的电荷量子比特与量子化光场之间的纠缠.通过求解系统的concurrence下限, 研究初态的混合度λ和失谐量Δ对系统纠缠随时间演化的影响. 在弱场中, 电荷量子比特初始是激发态的系统, 其纠缠度远远大于电荷量子比特初始是基态的系统, 并且Δ对系统的纠缠有明显的抑制作用. 在强场中, 电荷量子比特初始分别为激发态和基态时系统的纠缠演化接近一致, 初态混合度最高时系统的纠缠度最小, 并且Δ对系统纠缠的影响变弱. 关键词： 约瑟夫森结 纠缠 混合态 concurrence下限     

对流扩散方程带罚函数项的有限体积格式及其分析

1引言 有限体积方法[l]一l’]作为守恒型的离散技术，被广泛应用于工程计算领域.文【2，3} 基于分片常数和分片常向量函数空间，对二维驻定对流扩散方程提出了一类非协调混合 有限体积(Covolume)格式，证明了格式具有。(hl/2)收敛精度.但该格式要求对偶剖分 比较规则，即采用重     

Superconductivity and normal state resistivity of Ba0.6K0.4BiO3: an optical phonon approach

We discuss the nature of the pairing mechanism and the physical properties associated with the normal as well as the superconducting state of cubic perovskites Ba_0.6K_0.4BiO₃using the strong coupling theory. An interaction potential which includes the Coulomb, electron–optical phonon and electron–plasmon interactions is developed to elucidate the superconducting state. A model dielectric function is constructed with these interactions fulfilling thef-sum rule. The screening parameter (μ^* = 0.26) infers the poor screening of charge carriers. The electron–optical phonon strength (λ) estimated as 0.98 is consistent with an attractive electron–electron interaction and supports the moderate to strong coupling theory. The superconducting transition temperature of Ba_0.6K_0.4BiO₃is then estimated as 32 K. Ziman's formula of resistivity is employed to analyse and compare this with the temperature-dependent resistivity of a single crystal. The estimated contribution from the electron–optical phonon together with the residual resistivity clearly infers a difference when a comparison is made with experimental data. The subtracted data infer a quadratic temperature dependence in the temperature domain (30 ≤ T ≤ 200 K). The quadratic temperature dependence of ρ [ = ρ_exp − (ρ₀ + ρ_e–ph)] is understood in terms of 3D electron–electron inelastic scattering. The presence of these el–el and el–ph interactions allows a coherent interpretation of the physical properties. Analysis reveals that a moderate to strong coupling exists in the Ba_0.6K_0.4BiO₃system and the coupling of electrons with the high-energy optical phonons of the oxygen breathing mode will be a reason for superconductivity. The implications of the above analysis are discussed.     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

电化学超级电容器电极材料的研究进展

回顾了电化学超级电容器电极材料的研究进展，并对不同电极材料的储能原理和性能特点进行了简要的阐述。参考文献29篇。     

微乳凝胶法制备MoO3/SiO2纳米复合氧化物及DSC-TG分析

由微乳凝胶法制备了一系列不同MoO3含量的MoO3/SiO2纳米复合氧化物,运用DSC-TG,TEM,XRD和FT-IR等技术对其进行了相应表征.结果表明:所制备复合氧化物适宜的焙烧温度为300℃;样品粒径分布在20~24 nm;样品中MoO3在SiO2表面分散良好,其单层分散阈值在12~12.5%之间;表面Mo与Si原子以Mo—O—Si键联接.     

RuO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed oxide composite coating for improvement of Al-alloy sacrificial anodes

It has been recently proved that RuO₂ can act as an effective surface activator of aluminum alloy sacrificial anodes. TiO₂ has the property of stabilizing RuO₂ coating and resisting biofouling on metal surfaces. Hence, a mixed oxide catalytic coating of TiO₂ and RuO₂ can enhance the galvanic performance of aluminum alloy sacrificial anodes and resists biofouling on the anode surface. In the present work RuO₂–TiO₂ mixed oxide was coated on aluminum alloy sacrificial anodes. The large and uniform porous nature of the coating was found to facilitate efficient ion diffusion. The coating was found to persist on the anode even after 3 months of galvanic exposure. The anode having an optimum combination of the mixed oxide had 70% TiO₂ as the major component in the coating. The catalytic coating significantly improved the performance of the anodes to a large extent.